PDA

View Full Version : M-chassis racing Lipo cut off


cannonballmac
20-10-2018, 10:15 AM
Hi,

Just starting off some mini racing at my local club.

What type of lipo cut off is recommended if an old style Speedo is being used with lipo packs?

Any advice or tips welcome.

Wig
20-10-2018, 11:36 AM
Something like this


https://hobbyking.com/en_us/hobbykingtm-lipo-voltage-checker-2s-8s.html?countrycode=GB&gclid=EAIaIQobChMI-cvJxfaU3gIVg7HtCh2QpgYJEAQYASABEgKTnPD_BwE&gclsrc=aw.ds&___store=en_us


but if you have a reasonable size lipo and only running for 5 min heats you should be ok without one.

knighthawk
20-10-2018, 01:14 PM
Hi,

Just starting off some mini racing at my local club.

What type of lipo cut off is recommended if an old style Speedo is being used with lipo packs?

Any advice or tips welcome.

What are you racing ?
As it maybe cheaper to buy an Esc with cutoff

cannonballmac
20-10-2018, 11:09 PM
I did look at that but wondered what else was around. It might be one of the better options. Yeah should get at least 2 runs out of 1 pack I would hope...

cannonballmac
20-10-2018, 11:11 PM
I picked up an old mtroniks and a couple of eBay specials to try. Seen a few old escs advertised for mini racing and wondered if it would be worth mucking about with.

Spoolio
10-11-2018, 05:44 PM
Just use a Hobbywing Quicrun 1060, that’ll run any brushed motor that a Mini can cope with and it’s got Lipo cut off built in and you can also disable reverse if needed.