View Full Version : Show us your Cougar Laydown.
Spils77
01-06-2019, 05:23 PM
Just finished building the kit and the last coat of paint went on the shell this morning. I thought I would share a few photos with you all. I still have to tidy up the electrics and carry out some final adjustments.
Haha,nearly the same colour :woot:
https://photos.smugmug.com/Rcbuild/Laydown-/i-qdXr8pc/0/89b862b0/M/IMG_3617-M.jpg (https://www.rosswhitelock-photography.co.uk/Rcbuild/Laydown-/i-qdXr8pc/A)
https://photos.smugmug.com/Rcbuild/Laydown-/i-WTxstb7/0/922b24f2/M/IMG_3612-M.jpg (https://www.rosswhitelock-photography.co.uk/Rcbuild/Laydown-/i-WTxstb7/A)
PaulFarrand
03-06-2019, 09:19 PM
Getting there.....
Spils77
04-06-2019, 11:32 AM
Haha,nearly the same colour :woot:
https://photos.smugmug.com/Rcbuild/Laydown-/i-qdXr8pc/0/89b862b0/M/IMG_3617-M.jpg (https://www.rosswhitelock-photography.co.uk/Rcbuild/Laydown-/i-qdXr8pc/A)
https://photos.smugmug.com/Rcbuild/Laydown-/i-WTxstb7/0/922b24f2/M/IMG_3612-M.jpg (https://www.rosswhitelock-photography.co.uk/Rcbuild/Laydown-/i-WTxstb7/A)
Looking Good, almost the same colours :thumbsup:
Loving the build photos, I can see you have had some issues with the transmission by the looks of it.
How are you keeping the wiring so neat, do you have to shorten the servo/ESC cables to the receiver?
I have just wedged mine behind the servo at present but was hoping to use the space there for the transponder.
Spils77
04-06-2019, 11:35 AM
Getting there.....
Looks nice with the carbon parts you have fitted.
BlobbyDavro
04-06-2019, 01:24 PM
I'm under the impression the transmission case is supposed to bow out like that before it's screwed together, FWIW. I think it was Kyosho who started doing that. It ensures the tight fit of the two halves all the way around when screwed together. The case certainly fit together very well anyway.
cornishboy176
04-06-2019, 03:27 PM
Here it is,
Looking Good, almost the same colours :thumbsup:
Loving the build photos, I can see you have had some issues with the transmission by the looks of it.
How are you keeping the wiring so neat, do you have to shorten the servo/ESC cables to the receiver?
I have just wedged mine behind the servo at present but was hoping to use the space there for the transponder.
Most of those pictures are of the first one I built for a mate. His had more play in the diff than mine, but it's been fine so far though.
The motor wires I just used the side holders as I didn't want them going over the motor. The servo wire had already been shortened, i need to do it a bit more. The ESC wire is kit length. I will shorten it once i know its all stay as it is now.
Its worth shortening them if you have to tool for it.
I'm under the impression the transmission case is supposed to bow out like that before it's screwed together, FWIW. I think it was Kyosho who started doing that. It ensures the tight fit of the two halves all the way around when screwed together. The case certainly fit together very well anyway.
It done it on the first one I built for a mate and mine. It has been fine so far :)
Here it is,
Ohh, I love that shell :wub
Here is mine.
Can I asked where that shell is from. And, what the reason behind spacing the top of the rear shocks out :thumbsup:
cornishboy176
04-06-2019, 04:15 PM
Ohh, I love that shell :wub
Thanks Ross, done by @nukeproof
mark christopher
04-06-2019, 05:07 PM
Can I asked where that shell is from. And, what the reason behind spacing the top of the rear shocks out :thumbsup:
looks like what we did with the L1 and Kc, im pretty sure the Ld tower is moved forward so its no longer needed to be done
looks like what we did with the L1 and Kc, im pretty sure the Ld tower is moved forward so its no longer needed to be done
Thanks Mark, but what does it do :)
My shell is a penguin one and I spaced the shocks forward because I the shocks lean back a little and I wanted to straighten them up a touch. I have run the car and after a few setup changes it was good.
Here is mine. Wasn't to happy with it at the weekend on grass but got through the day. Goes well on the astro.
https://live.staticflickr.com/65535/48002108052_5bc5e93cac.jpg (https://flic.kr/p/2g8MmmC)
https://live.staticflickr.com/65535/48002168058_9afd4d9d67.jpg (https://flic.kr/p/2g8MEcd)
https://live.staticflickr.com/65535/48002108767_b78c00d7cc.jpg (https://flic.kr/p/2g8MmyX)
Spils77
04-06-2019, 08:35 PM
Here is mine. Wasn't to happy with it at the weekend on grass but got through the day. Goes well on the astro.
https://live.staticflickr.com/65535/48002108052_5bc5e93cac.jpg (https://flic.kr/p/2g8MmmC)
https://live.staticflickr.com/65535/48002168058_9afd4d9d67.jpg (https://flic.kr/p/2g8MEcd)
https://live.staticflickr.com/65535/48002108767_b78c00d7cc.jpg (https://flic.kr/p/2g8MmyX)
Love the paint scheme. Good to here the car ran well on astro. What did you find the car doing/not doing on grass?
Spils77
04-06-2019, 08:41 PM
Most of those pictures are of the first one I built for a mate. His had more play in the diff than mine, but it's been fine so far though.
The motor wires I just used the side holders as I didn't want them going over the motor. The servo wire had already been shortened, i need to do it a bit more. The ESC wire is kit length. I will shorten it once i know its all stay as it is now.
Its worth shortening them if you have to tool for it.
I have seen a few posts with problems in the transmission area but to be fair mine seems fine after I fitted the extra shims due to me not reading the info on the packet.
I was thinking about shortening the wires but knowing my luck the servo or ESC will fail soon afterwards and I will have invalidated any warranty.
Looking forward to giving mine it's maiden run tomorrow night at our local indoor club.
My shell is a penguin one and I spaced the shocks forward because I the shocks lean back a little and I wanted to straighten them up a touch. I have run the car and after a few setup changes it was good.
Cool, thanks :thumbsup:
Love the paint scheme. Good to here the car ran well on astro. What did you find the car doing/not doing on grass?
To be fair I don't like racing on grass so went with the wrong attitude.
PaulFarrand
11-06-2019, 10:50 AM
Lets hope it runs as good as it looks.....:D:thumbsup:
Spils77
11-06-2019, 11:28 AM
Lets hope it runs as good as it looks.....:D:thumbsup:
Looking great, loving the paint scheme. :drool:
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.