Willspeed RF2 B6.1 Conversion kit build

[MHeadling]

Hi Guys, Im doing a build thread on the proto B6.1 Willspeed conversion over on rctech, check it out here

https://www.rctech.net/forum/electric-off-road/1052579-willspeed-rf2-b6-1-conversion-kit-build.html

[Steve.T]

Will this conversion work with a b6?

[daz75]

I see you've mentioned some nuts and spacers you've used. Does that not come with either of the kits

[MHeadling]

You get the hardware for the conversion and I'll feedback in on the extra bits i used to they are included, as for the servo shims you'll need to source these yourself if using full size servo or go for a low profile one, really just depends on what electrics you run

Yes I built this off a B6 and will update the thread with the parts I used shortly

[MHeadling]

Part numbers updated on Rc tech thread if you want to covert a B6

[MHeadling]

All done and ready for Sunday

[Aire valley]

That looks exceptionally good..👍....be very interesting to hear how it goes..

[Steve.T]

Part numbers updated on Rc tech thread if you want to covert a B6

Much appriciated. I have a couple more questions.
Whats the benefit over a standard b6/b6.1?
will work in slippery conditions bearing in mind the motor position?

[MHeadling]

I’ll let you know when I run it on Sunday!

As for the wet conditions I image due to the weight dist a b6.1/d would be better option

[Maffoo]

Car looked very good in your footage Mark. Great info and the weight surprised me, that's a decent saving and shows with how balanced it looks.

Keep up the info, I'm very tempted when this goes on general sale.

[MHeadling]

Thanks, yes it was a good first outing for the car, need to find a little more steering but we have some ideas to try (orange front spring/akerman change)

Will also go up on diff oil from 5k to 20k

[MHeadling]

- - B6.1 RF2 PREORDER LIVE! - -

https://www.t6racing.co.uk/willspeed-rf2-b61/willspeed-rf2-b61-mid-december-delivery-53lg7

It's been a popular demand and I'm happy to announce that the B6.1 version of our RF2 conversion platform is now available to preorder!
This also brings the launch of our webshop T6 Racing! 🤘🏁

Manufactured to order and delivery expected mid December just in time for Christmas 🎄🎄🎄

Strongly advised that you preorder to guarantee a kit, the number of kits produced will be relative to the preorder number.

There are two options on the website either -

£50 Deposit with the remaining to be paid before completion (A weblink for remaining payment will be supplied)

Complete payment, kit to be shipped as soon as completed.

Really proud of this one, stepping up the quality as much as we can once again. Excited to get these out and see them on track!

As always, any queries, questions, problems with the new site etc please drop me a email to [email protected] or drop me a message through the page.

Will

#Willspeed #T6Racing #T6Innovations #B6launch

[daz75]

Doesn't even say how much it is

[Origineelreclamebord]

Doesn't even say how much it is


It does in the description: 260GBP. There is also a page where you can pre-order and pay the entire kit price in one go.

[MHeadling]

Official pics are up!

https://www.redrc.net/2019/11/willspeed-rf2-b6-1-conversion-kit/#more-178208

[charlesk]

Looks nice.

Only one simple thing I'd change thought, esp in the display pics:
those really long screws that hold the D-block on ;)

It's a nice piece of engineering even if personally I wouldn't be willing to pay £260 over the price of any kit for an alternative chassis.

[rc_penguin]

All these are manufactured to order just so you guys are aware :)

I'll be keeping the Preorder open until the end of this month (30th November) so please get your deposit down before the month is out should you like one!

Oh, if you want your name/nickname engraved into your chassis, there is no additional charge for this! Just place the preorder and drop a message on any of the Willspeed/T6 Racing contact links.