PDA

View Full Version : wiring diagrams for ko esprit 2 2.4ghz.


overson
05-05-2009, 05:34 PM
Hi does any one have the information on how to wire in a spektrum module into a ko esprit 2.
Thanks Neil.

warped
05-05-2009, 07:09 PM
Sure you mean esprit 2 ?

Ko changed the module design when the vantage ( successor to the esprit 2) was brought out some years ago. - The modules from the later transmitters still plug into an esprit 2 and vice versa but the electronics are different.

I very much doubt that you will find a 2.4ghz module for a transmitter that old.

overson
05-05-2009, 07:39 PM
Hi its a ko propo vantage esprit 2.
The one were the module plugs in the bottom, I want to convert it to 2.4ghz the same as my esprit 3 but need to know how to wire it as there are 6 connections on the module and on my esprit 3 there are only 5 connections. I know it can be done seen other people with there hand sets converted.

warped
08-05-2009, 10:31 PM
I believe helger -the distributors were the people that offered the conversion service. - But it involved sending the transmitter back, and was something that was installed by their technicians.

danDanEFC
09-05-2009, 03:10 PM
I have a pdf with some instructions on how to do this.

I sent mine away to get done by Horizon

andyg01
09-05-2009, 03:45 PM
The local model shop should be able to send it away for you .. cost I think is approx £50

Garry
09-05-2009, 08:53 PM
http://www.oople.com/forums/showthread.php?t=23237