Chequered Flag Racing
26-02-2007, 11:26 AM
Precision Cut Front Ride Height Shimz in carbon fibre
http://snap33.photobox.co.uk/025090590058cc75dbd9b71c5142e8cbdca74b05dd4a087d7b 290fe0.jpg
Suitable for all 12th & 10th scale pan car chassis’s that run the Team Associated Dynamic Link front end suspension.
Kit comprises 3 pairs of shims each drilled with small hole for easy ID.
The single hole being the thinnest shim etc.
0.5mm
1.0mm
1.5mm
Easy to use and install. Just back out the screws until you have enough clearance to install a shim. No more messing around removing the screws to install those heavy alloy washers
Allows you to keep your ride height as low as possible & you can run small OD fronts foams. Both of which can aid the handling of the car in the right track conditions.
If you are unsure about fitment please contact us and we can give you the hole spacing dimension.
Here are just a few of the chassis that run the Team Associated Dynamic Link front end or the Team Associated ‘Old School’ suspension.
If you chassis is not listed please contact me so that I can check to see if parts are suitable.
RC12 L4
RC10 L40
RC12 L3
RC10 L30
BMI 12th chassis
Calandra Link chassis
Calandra T-Force chassis
Diggity Designs
FTX Phantom FTX5000
Hara Hammer 12
HyperDrive
Hyperform
Speedmerchant
Trinity Black Widow
Yokomo YRX-12 Worlds Edition
CEFX C12 (must use latest chassis that allows to run AE front suspension)
Corally 12SX (must use AE front suspension)
If you are unsure about fitment please contact us and we can give you the hole spacing dimension.
£10 posted UK mainland
$22 shipped to USA, (other overseas I'll need to check)
http://snap33.photobox.co.uk/025090590058cc75dbd9b71c5142e8cbdca74b05dd4a087d7b 290fe0.jpg
Suitable for all 12th & 10th scale pan car chassis’s that run the Team Associated Dynamic Link front end suspension.
Kit comprises 3 pairs of shims each drilled with small hole for easy ID.
The single hole being the thinnest shim etc.
0.5mm
1.0mm
1.5mm
Easy to use and install. Just back out the screws until you have enough clearance to install a shim. No more messing around removing the screws to install those heavy alloy washers
Allows you to keep your ride height as low as possible & you can run small OD fronts foams. Both of which can aid the handling of the car in the right track conditions.
If you are unsure about fitment please contact us and we can give you the hole spacing dimension.
Here are just a few of the chassis that run the Team Associated Dynamic Link front end or the Team Associated ‘Old School’ suspension.
If you chassis is not listed please contact me so that I can check to see if parts are suitable.
RC12 L4
RC10 L40
RC12 L3
RC10 L30
BMI 12th chassis
Calandra Link chassis
Calandra T-Force chassis
Diggity Designs
FTX Phantom FTX5000
Hara Hammer 12
HyperDrive
Hyperform
Speedmerchant
Trinity Black Widow
Yokomo YRX-12 Worlds Edition
CEFX C12 (must use latest chassis that allows to run AE front suspension)
Corally 12SX (must use AE front suspension)
If you are unsure about fitment please contact us and we can give you the hole spacing dimension.
£10 posted UK mainland
$22 shipped to USA, (other overseas I'll need to check)