View Full Version : schumacher Cat sx battery?????
Brooks
03-07-2009, 07:58 PM
Hi there
Thinking of some different lipos.
Can i run the hump/ridged lipos or do they have to be flat like Trakpower.
What lipos would you guys recommed?????? (thinking or the Intellent lipo):D
Cheers
Chris
stikkan1
03-07-2009, 08:22 PM
Hi there
Thinking of some different lipos.
Can i run the hump/ridged lipos or do they have to be flat like Trakpower.
What lipos would you guys recommed?????? (thinking or the Intellent lipo):D
Cheers
Chris
I have the GP4300 series lipo batteries in my cat, mounted upside/down.
(corally pluggs both sides)
2mm clearence to the mid belt.
jim76
03-07-2009, 09:20 PM
cells with lugs on will be a real squeeze under the belt, unless you get the new stiff chassis that has locating slots for the lugs.
any of the brca legal stick packs with a flat bottom should fit fine. which one you get depends on your budget and how much punch you want.
geerno
04-07-2009, 12:57 PM
Avoid the lipos with the humps, it causes a headache, unless you have the new stiffer chassis.
I have the intelect, and I wish I had bought something else. I have to run them upside down and thus have strange wiring.
mikeyscott
19-07-2009, 03:06 PM
Any pics of the new chassis?
AmiSMB
19-07-2009, 09:45 PM
I run the Vampire racing Lipo's which have location bumps on using the NiMh CAT SX chassis. All I had to do was to dremel a small part out at the front to allow the front locator to locate. You do need the Lipo servo mounts, Lipo belt roller and lipo battery strap to do this to a NiMh CAT.
AmiSMB
19-07-2009, 09:47 PM
Here is a picture from another member from the board that did the same mod.
http://i83.photobucket.com/albums/j319/jas_racing/IMAGE_298b.jpg
mikeyscott
19-07-2009, 09:48 PM
I'm probably going to get a Core RC 5000 LIPo for the Cat and Trakpower for the XXCR. The Trakpower's aren't as tights as I'd like due to only being 3600s
Already got the Atomic Carbon brace
Darren Boyle
19-07-2009, 10:59 PM
I'm probably going to get a Core RC 5000 LIPo for the Cat and Trakpower for the XXCR. The Trakpower's aren't as tights as I'd like due to only being 3600s
Already got the Atomic Carbon brace
Each to their own but there are better LIPO's than those around for what you need ;)
mikeyscott
20-07-2009, 07:36 AM
Each to their own but there are better LIPO's than those around for what you need ;)
Which ones are you thinkng of then? I like the Vampire LIPOs I bought off you before, but they have locators on the bottom.
The Core RC seem to be the right size and have the wires positioned more away from the belt. I know it's a squeeze in the Cat regardless.
Darren Boyle
20-07-2009, 09:58 AM
The CORE is "up with the best" on price (£85 RRP) but at 25C (the 35C ones are not on the BRCA list) there are far better option's around in my opinion, Not just Vampire (but they are one of the ones I am thinking about of course) but the likes of LRP and Reedy too.
The "lumps" are not that much grief that a swift evenings modification will solve and then you will be able to use a "better" product as result of your work.
Same thing with the 3600's in your 2wd, similiar money can get you 4000+'s at 35C that would just drop striaght in without fuss (due to their lower height than higher capacity ones)
Brooks
20-07-2009, 01:44 PM
I know alot of people at my club who run the Intellect lipos 5000mah 30c from Hong kong on Ebay, they are only 48 pound with postge :D BARGAIN
Only problem is they have humps for the chassis locaters
Can these be filed down with a Dremel????? :eh?:
mikeyscott
20-07-2009, 01:53 PM
The Trakpower 3600 LIPOs were a bargin buy, but appreciate they may not be the best. They do however fit will in the Losi XXCR due to their size and hopefully I'll be able to get some lead underneath them.
As for dremeling parts of the Cat SX or LIPOs, I'm not a fan of that. I dremelled the servo for the XX, but that's it.
bigred5765
20-07-2009, 02:32 PM
we had the problem were we couldn't get the cells in because of there humps underneath, and they touched the belts and pulleys,so we have made holes in the chassis for them to drop in, this has made the chassis a bit More flexible which has helped handling and made the car easier to drive on high grip tracks,15mins with a dremmel no skill involved lol:D
Darren Boyle
20-07-2009, 02:34 PM
Dont EVER dremel the LIPO itself, it is both dangerous (potentially) and will render them illegal.
That said, filling a little away from a chassis is neither too much of a hardship or big deal really to make somthing fit easier.
bigred5765
20-07-2009, 02:44 PM
no sorry if i didn't make it completely clear, i dremmeled are chassis not the cells, as Darren said not a good idea to go any were near a lipo with a dremmel,
Darren Boyle
20-07-2009, 02:56 PM
Carl, I replied to Mikey's post were he stated "As for dremeling parts of the Cat SX or LIPOs, I'm not a fan of that. I dremelled the servo for the XX, but that's it".
All what you put was spot on ;)
mikeyscott
20-07-2009, 02:59 PM
Carl, I replied to Mikey's post were he stated "As for dremeling parts of the Cat SX or LIPOs, I'm not a fan of that. I dremelled the servo for the XX, but that's it".
All what you put was spot on ;)
I wouldn't dremel LIPOs for safety reasons anyway.. Just get the money out and buy the right ones in the first place ;)
Brooks
20-07-2009, 05:52 PM
I dont think i will done the lipo dremel route
What lipos dont have the humps on them????
Dont really want to dremel the chassis
I may just go for the Trakpower 4900 25c (No Humps) :D
mikeyscott
20-07-2009, 05:55 PM
Just got to get the wiring right. The wiring on the outside means less wires towards the belts.
VXRBennie58
22-07-2009, 12:00 PM
I'd recommend the core's, very good lipo's for the money !
I'd also consider the Intellects at £50 :D
geerno
22-07-2009, 12:28 PM
Dont EVER dremel the LIPO itself, it is both dangerous (potentially) and will render them illegal.
That said, filling a little away from a chassis is neither too much of a hardship or big deal really to make somthing fit easier.
Agreed, and if you take to much off some lipo hard cases, you will have a hole in the case before you get the hump level to the bottom of the rest of the lipo case. Especially the intellects with carbon look case.
geerno
23-07-2009, 05:52 AM
OK! Check this out. The SMC 4700 40c Lipos have humps on the base, but the can be used upside down because there are tube connectors on each side. Genius. Will work no problem in the SX, and they are 40c :drool:
http://www.rc-mushroom.com/product_info.php?manufacturers_id=&products_id=17823
Darren Boyle
23-07-2009, 08:30 AM
OK! Check this out. The SMC 4700 40c Lipos have humps on the base, but the can be used upside down because there are tube connectors on each side. Genius. Will work no problem in the SX, and they are 40c :drool:
http://www.rc-mushroom.com/product_info.php?manufacturers_id=&products_id=17823
Exactly the same principal as the LRP/Nosram's available here in the UK already, BUT LRP etc are BRCA legal, the SMC are not......
mikeyscott
23-07-2009, 08:33 AM
Indeed I do want BRCA legal as at some point I will be doing an event. Bit late for this year though :(
Any plans for the vampire racing to have the connectors on the other side too?
Darren Boyle
23-07-2009, 08:35 AM
They are not allowed to change the spec once it is submitted for BRCA/EFRA approval, if they did they would be illegal. So in short, no not at present
Brooks
23-07-2009, 08:38 AM
The Gp 5300 30c lipos have corally tubes on both side
Turn them up side down :D
VXRBennie58
23-07-2009, 09:09 AM
I didn't know intellect did 5000's with 40C. Perfect for tourers:lol:
The only problem with the LRP's is that there £99.99 RRP but I suppose you pay for quality. The Orion 3800 are still £89.99 and they're only 30C but the cells are Kokam.
You pay for quality :lol:
VXRBennie58
23-07-2009, 09:20 AM
Just weighed some GP 4000's and some 5000's and a pack of Orion 3800
GP 4000 : 232g
GP 5000 : 272g
Orion 3800 : 231g
Orion's were only 1g lighter than the GP4000's but they look so much smaller and look look less bulky:D
mikeyscott
23-07-2009, 10:16 AM
Interesting.. The weight factor is rather critical in my XXCR, but not sure about the Cat SX (haven't run it yet)
Darren Boyle
23-07-2009, 10:57 AM
I didn't know intellect did 5000's with 40C. Perfect for tourers:lol:
The only problem with the LRP's is that there £99.99 RRP but I suppose you pay for quality. The Orion 3800 are still £89.99 and they're only 30C but the cells are Kokam.
You pay for quality :lol:
I would MUCH sooner have an LRP 5300 40C for £99 RRP than an Orion 3800 30C for a tenner less (£89 RRP).
Orion may be Kokam's but the LRP's are not exactly cheap and nasty tat inside, they are excellent quality too with more capacity and power to boot.
VXRBennie58
23-07-2009, 01:47 PM
Yeah I agree, id rather have the LRP :lol:
Brooks
23-07-2009, 01:50 PM
I agree as well The Gp's are good for the price
VXRBennie58
23-07-2009, 07:57 PM
Yep I run the GP4000 35c's in my 416 WE and I think they're brilliant:D
mikeyscott
24-09-2009, 05:20 PM
What LIPOs did you get in the end and how many have moved to the new stiffer chassis?
Brooks
24-09-2009, 08:10 PM
I got the GP 4300 35c Lipos from Hong Kong in the end
Only £40 with P&P :thumbsup:
Had to take abit of the humps on the lipos to make them fit under the battery bar, but they fit fine :thumbsup:
Used the same chassis
mikeyscott
24-09-2009, 08:25 PM
I got the GP 4300 35c Lipos from Hong Kong in the end
Only £40 with P&P :thumbsup:
Had to take abit of the humps on the lipos to make them fit under the battery bar, but they fit fine :thumbsup:
Used the same chassis
Don't want to dremel the batteries etc. So it sounds like a no go.
bigred5765
24-09-2009, 09:27 PM
dont dremmel the batterys dremmel the chassis,im pretty sure if u dremmel them there no longer legal,
mikeyscott
24-09-2009, 09:34 PM
dont dremmel the batterys dremmel the chassis,im pretty sure if u dremmel them there no longer legal,
My thoughts exactly, whats the point in spending all that money and then becoming illegal..
lochness42
25-09-2009, 06:29 AM
http://westlondonmodels.com/product2625/ThunderPower-TP-5000-Car-PR/
EFRA legal - I belive also BRCA legal.
It's my choice no.1
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.