View Full Version : Cat SX LIPO Servo mounting
mikeyscott
20-07-2009, 03:15 PM
Mounting a Sanwa Servo in the Cat seems a bit line it up and hope. How have others fitted them? Unlike a B4, Losi etc. where the servo just goes in.
To the front, back or in the middle of the servo posts?
Sorry for the stupid post
AmiSMB
20-07-2009, 03:55 PM
I found the same problem at the weekend after my Futaba BLS451 decided to let me down. I just screwed the servo down a little at a time either side giving a bit of a tweek to centre it and then tigtened both down as far as possible. It seems to have worked.
mikeyscott
20-07-2009, 03:59 PM
I found the same problem at the weekend after my Futaba BLS451 decided to let me down. I just screwed the servo down a little at a time either side giving a bit of a tweek to centre it and then tigtened both down as far as possible. It seems to have worked.
Pretty much the same as what I did. Why have they done a servo mounting like this?
Got a different problem now. It's a brand new PB spec Cat SX and the steering is very stiff even without the servo fitted, I thought it was suppose to be super smooth... Looks like a strip down of that later. Car won't be running for a couple of weeks due to the shell getting painted.
Also missing the rear transmission cover.. Did this PB build have a Friday afternoon job :cry:
AmiSMB
20-07-2009, 08:08 PM
Sounds like they may have put the screws in the wishbones and in the yokes at a slight angle.
mikeyscott
26-07-2009, 04:25 PM
Had a few screws come loose today around the steering area. Not what I expected. So I'll be threadlocking them a little.
Still not happy with the way the servo is mounted. Are you using the rubber gromets you get with most new servos?
bigred5765
26-07-2009, 04:29 PM
can you get a pic online to show the probs ur having,no dont use rubber gromets,
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.