View Full Version : Servo Saver for Cat SX
mikeyscott
28-07-2009, 07:49 PM
Any particular one? I'm running a sanwa in the Cat
bigred5765
28-07-2009, 07:50 PM
dont use one,
geerno
29-07-2009, 09:12 AM
If you have a metal gear servo you can probably get away without one. I don't use one with my ACE metal gear servo. I used a non metal gear servo for 5 months before it stripped the gears.
It all comes down to how much you crash and how badly. I generally don't have many breakages (maybe 7 in total) or bent front screws on my SX, and others have heaps.
bigred5765
29-07-2009, 09:27 AM
the trouble with running a servo saver is it makes the car feel vague,and not very accurate to drive,and not just this car any car,
jlong
01-08-2009, 12:55 AM
to answer the question though-
The one off the Mi3 touring car fits ok, but it rubs a little on the top of my ace servo. The kimbrough medium is a direct fit also, but it may rub a tad on the vertical side part of the undertray and the side shell. This can be mitigated with a dremel by shortening the threaded part of the ball stud and a skinny (non-nyloc) nut.
There may be others, ofna, racers edge....dont know about those. I stripped the stock plastic horn pronto, and I crash too much to get away with a metal horn for very long.
Cruise
01-08-2009, 06:52 AM
@jlong:then try to get hold of a BMax servo arm. Not really a servo saver but flexing enough to protect your servo.
Cruise
jlong
02-08-2009, 02:14 PM
@jlong:then try to get hold of a BMax servo arm. Not really a servo saver but flexing enough to protect your servo.
Cruise
Never heard of that, but I would like to check it out. Where to look?-Thanks.
Cruise
02-08-2009, 03:17 PM
Yokomo part nr. YBM.200.
Better you find someone who has a BMax and ask for the arm as there are a lot of parts you won`t need in this sparepart
Cruise
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.