PDA

View Full Version : xx4 drivetrain

rob84
28-07-2009, 08:31 PM
I put a kevlar 84t spur in my xx4. The drivetrain sounds like somethink is catching when i pull it forward, could it be the spur? is it two big? cheers
ashleyb4
28-07-2009, 09:31 PM
No run a 84 spur in my xx4 no problem at all. Have you put the slipper back togerther correctly. AKA spacers or soemthing in the wrong place. Also check the pin that the front slipper plate locks to hasnt come out. I have seen it where people have had the pin come out and catch the top belt tunnel.

A
Southwell
29-07-2009, 08:36 AM
No run a 84 spur in my xx4 no problem at all. Have you put the slipper back togerther correctly. AKA spacers or soemthing in the wrong place. Also check the pin that the front slipper plate locks to hasnt come out. I have seen it where people have had the pin come out and catch the top belt tunnel.

A

Thats not strictly true, the 84 can catch on the bottom of the chassis, but generally off of jumps. You should dremel a bit of the chassis out where the spur sits, although this doesn't sound like your problem i would still do it.
ashleyb4
29-07-2009, 11:28 AM
Ive run a 84 in my xx4 since ive owned it never had a problem. Learn something new everyday.

A
Holeshot
11-08-2009, 10:49 AM
Thats not strictly true, the 84 can catch on the bottom of the chassis, but generally off of jumps. You should dremel a bit of the chassis out where the spur sits, although this doesn't sound like your problem i would still do it.

Yeah, when oople did a review they mentioned that

http://i32.tinypic.com/4fy45y.jpg