b44 gearin problems

[pizzaman]

what is the correct gearing for a b44 with sphere comp2007 x11 5.5 bonded an lipo saddle packs on 81 tooth spur gear
cheers for any help

[Timee80]

i think either a 17 or 18 tooth pinion with standard spur is about right buddy

[pizzaman]

BUMP

[pizzaman]

have try 17,19, 20 pinions and it is still doing about 5to 6 laps and shutting down with both motor an esc hot my 6.5 sinted runs at 84/26 and is fine for the 5.5 bonded should it be more like 84/23.
or is 17 wright an something is wrong

[showtime]

i run an 18 on my 4.5 with no issues ;)

[Mike Hudson]

16 or 17t pinion on 81t spur would be about right for a bonded 5.5

[discostu]

what is the correct gearing for a b44 with sphere comp2007 x11 5.5 bonded an lipo saddle packs on 81 tooth spur gear
cheers for any help

there is no correct gearing it all depend on track size driving style etc etc what is everybody else running

[pizzaman]

no matter what track size or my driving style if geared right it should do more than 6 25second laps before overheating.surely
there is no correct gearing it all depend on track size driving style etc etc what is everybody else running

[discostu]

that sounds like more of a electics issue rather than a gearing issue.

[Dazzler]

Hey Pizzaman, It's worth dropping the pinion off and checking that the drive train is all running free too. You may have already done this, so just a suggestion along side finding a base setting for your gearing.

[bigred5765]

take the rotor out to see if its fluffed up and damaged

[steel]

also ste i had this problem for a while with are ants b44 found it to be i was runnin the slipper to loose:blush:but all ok now