PDA

View Full Version : Advise - DB01 wheels, tyers & Foam!


VinceVegaUK
07-09-2009, 10:35 PM
Hi all,

Im running my Durga at Bury and my stock K type tyers are worn and need to get some shu yellows i guess as every one else is using them. Do they fit the durga stock wheels if not what wheels will fit both the shu tyres and the durga? Also what inserts should i use.

I also want a set for indoors at bury and southport, some have said i will be ok on my worn stocks (a friend is giving me some more new stocks) or go for mini pins but same question as above, what type of tyre and wheels would you suggest.

Also i would prefer it if i could have black wheels :-p (or green)

Thanks

VV

shanks
07-09-2009, 10:57 PM
Vince

They fit on tamiya wheels

VinceVegaUK
08-09-2009, 12:10 PM
Cool,

What inserts should i use and what do i get for outdoor and indoor. Any places to buy you can reccomend?

I get confuesd between mini pins and mini spikes which are indooor which are outdoor and are the indoors yellow two?

thanks

V

shanks
08-09-2009, 12:17 PM
Vince

Minipins - tiny pins on em - most use theese indoors

Minispikes - larger spikes on em - theese are def what you need outdoor.

Yellow compound for both

Google either and you will get some photos so you can see the difference

As to where to buy

JE Spares
Roundabout toys & models (ashton)

locally

saving that google em again - most shops stock em

Microtech i find to be very quick delivery

VinceVegaUK
09-09-2009, 01:23 PM
Aye, yea i just rememberd microtech i get my 1/10 tourer Gekos form there!

what about insert foams?

MRD
09-09-2009, 01:59 PM
For inserts use shumacher greens all round. I'm pretty sure green is medium and its the one I get told to use.