View Full Version : CAT SX with Std/Losi Shocks with/without Rear Shock Conversion???
TRICKYNICK
11-09-2009, 02:09 PM
Now then Everyone
I wanted to start a poll but the option was unavailable.
I want to know from you fellow racers what is the best combo on a CAT SX please as there are 4 main options and I’m confused which option is the best all rounder :confused:
1, CAT SX with original shocks mounted in front of rear wishbone (std kit)
2, CAT SX with original shocks mounted back of rear wishbone (with conversion)
3, CAT SX with Losi shocks mounted in front of rear wishbone
4, CAT SX with Losi shocks mounted back of rear wishbone (with conversion)
Your help will be greatly appreciated :thumbsup:
MANY THANKS
bigred5765
11-09-2009, 02:14 PM
there is no one way that works best IMHO,shocks to the rear work for some people on bumpy tracks,but Matty ma boy doesn't like it at all,losi shocks same again slightly better on bumpy tracks but 90% of the time better on std shocks,
mikeyscott
11-09-2009, 02:14 PM
Mate of mine is running option 4 and it handles much better. I'm finding the Standard shocks horrible and i've got about 4 sets of Losi shocks, so tempted ot have a swap round.
bigred5765
11-09-2009, 02:24 PM
if you run grants setup which is on here some were, on std shocks its perfect, havent had a single problem,
stefke
11-09-2009, 02:25 PM
You should add options 5 and 6 :
5. Std shocks mounted at the rear (without conversion, drilled arms)
6. Losi shocks mounted at the rear (without conversion, drilled arms)
Except high grip astro tracks where I use option 1, I always use option 5 but with drilled pistons and extra droop.
stegger
11-09-2009, 03:57 PM
Option 1 for me.
I've run matty's setup's and grant's/matt b's setups and found them to be really good :thumbsup: suited me down to the ground. Tried the schui rear conversion and didn't like it, haven't used the Losi shocks on the car so can't comment. Personally i like the schui shocks, what are peoples problems with them ? :confused:
lochness42
11-09-2009, 04:16 PM
I'm running Losi shocks on the car atm. I tried them as they were just sitting in the pit box. As they worked fine for me and I'm lazy to swap back wishbones with ballstuds for schuey shocks they are going to stay on the car for some time :D
And I'm running Losi shocks, without conversion, but want to try it!!
Northy
11-09-2009, 06:16 PM
Option 6 for me.... :)
G
jimarea51
11-09-2009, 06:40 PM
hey there...
Option 3 on mine... works well @ most tracks, Nothing wrong with the standard set-up, just the shock need rebuilding more often than the losi's....
JIm:thumbsup:
James
11-09-2009, 09:08 PM
I run losi shocks with the rear conversion..
Theres a lot more to it than that though, arm lengths, pistons etc, i run long rear link, blue pistons F & R wit 35f 30r..
The idea as im sure you know behind running the shocks on the back is that its better for bumpy tracks.
The cat runs better with a soft setup, never seems to work with hard oils and/or lots of pack.. This isnt a good thing for big jumps of course, but schumacher and team drivers dont stand still so new developments to aid this will emerge im sure..
Grants car has been flying this year and he probably runs the most standard setup of anybody :lol: , personally i prefer the losi shocks and rear mod, it certainly worked at RHR National for me :thumbsup:
old jonesy
13-09-2009, 06:56 AM
Andy has run kit standard all year.
3 B finals, 2 C finals, 1 D final and 21st in the national series says it ain't bad at all.
Pete
TRICKYNICK
17-09-2009, 01:32 PM
So what is the shock body length and piston length to use when using LOSI shocks on a CAT SX as there are 3 different lenghts :confused:
TRICKYNICK
18-09-2009, 01:35 PM
Any help would be welcome :thumbsup:
James
18-09-2009, 01:44 PM
same as used on the X6 i believe, which is standard xxx-cr :confused:
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.