PDA

View Full Version : Original Cat re-release - If most of us want it, it may come!


DanB4
17-09-2009, 08:25 PM
Would you buy a Cat re-release? Be it an XL/XLS/SWB/ProCat etc etc.

From Robin Schumacher:

Thanks for the feedback Dan,
There are no plans at the moment for any re-release, but if enough people ask then you never know!
Regards
Robin

Come on EVERYONE link from worldwide forums to this poll and let's get a load of 'YES' votes - I will then contact Robin again, we are one step closer!

I have just realised he copied Schumacher development folk on his email also so this may just be more than a pipe dream...

Dan

Dazzler
17-09-2009, 08:45 PM
But how would we all get those essential Model Motor Sport parts that were a must....:cry:

I was rather lucky (and so were other fellow Schumacher racers) as the guy who owned MMS came to our club regularly, he often had a few bit's in his pockets for sale. :thumbsup:

There were,

Layshafts
Diff's
Some rather nice heat sinks.

They were the good old days..

jameswilkinson7
17-09-2009, 08:47 PM
I neeeeed a SWB cat!!

DanB4
17-09-2009, 08:51 PM
I neeeeed a SWB cat!!

Well the people who count (i.e. the manufacturer!) are thinking about it which is a good start! ;)

jameswilkinson7
17-09-2009, 09:20 PM
Well the people who count (i.e. the manufacturer!) are thinking about it which is a good start! ;)

Fingers crossed then!

NeilD
17-09-2009, 10:14 PM
I really hope it does happen but i don't think it will. God i'm sooooooo negative.:lol:

poopers
17-09-2009, 10:18 PM
I'm all for this idea, it would be brilliant. Don't forget Schumacher chaps, one vote will often mean more than one car sold. :thumbsup:

Rich D
17-09-2009, 10:31 PM
Id love an XLS again - had my first one in 1987 :thumbsup: it was a real pup by the time id finished wrecking it :(

Si Coe
17-09-2009, 11:03 PM
I voted Procat, but lets be honest - I'd have an XLS too. I'm not sure about the stick pack SWB and XL just in terms of fitting modern cells.

NeilD
17-09-2009, 11:09 PM
I voted Procat, but lets be honest - I'd have an XLS too. I'm not sure about the stick pack SWB and XL just in terms of fitting modern cells.


I voted all bar the BossCat.

AmiSMB
18-09-2009, 07:47 AM
Cat XLS gets my vote as I loved them. I still have two that are still running :)

DanB4
18-09-2009, 08:05 AM
Numbers steadily increasing, I will put the total to him in a week or so, I assume most people would buy the most popular max votes model be it Cat XLS (leading at the moment) or otherwise, if you'd all buy a Cat XLS then we have a total of 80 votes, granted people can vote for more than 1 car though....

Spread the word, keep the votes coming.

Dan

migsy
18-09-2009, 09:28 AM
I voted Procat, but lets be honest - I'd have an XLS too. I'm not sure about the stick pack SWB and XL just in terms of fitting modern cells.

Procat was awsome, totally rocked my boat..bring back the pro in the cat!!!

Its a deffo yes from me, I want another "PROCAT".:thumbsup:

jeroen206
18-09-2009, 09:59 AM
Nice thing about rereleases is that there will be spares available again.
So people will also restore there old cars again.

I voted for a SWB Cat , because i got all the NIP parts together for a couple of years now, but still missing a body and undertray.
This one is the hardest to get parts for.

All the others XL/XLS/procat are often for sale , if you want a runner.

http://www.oople.com/forums/showthread.php?t=30290&page=3

i4n
18-09-2009, 10:05 AM
I went Boss and Pro Cat as these were the cars I really wanted when I first started racing (with my Tamiya Boomerang at the Astor Theater in Deal)

Answer-RC-Pete
18-09-2009, 10:28 AM
Bosscat as its the one I didnt own!

Chrislong
18-09-2009, 10:44 AM
Id have a XLS, Procat and Bosscat.

One car not ont he list id have, the illusive TOPCAT!

James
18-09-2009, 11:07 AM
Ive got a brand new one in my museum :thumbsup:

bigred5765
18-09-2009, 11:39 AM
cougar 2 works, xls,pro cat mms version hmmm schumacher yummyness

migsy
18-09-2009, 12:32 PM
I went Boss and Pro Cat as these were the cars I really wanted when I first started racing (with my Tamiya Boomerang at the Astor Theater in Deal)

hi ian,
I never knew you were into schumacher kits, would you run one at the comps:confused:

DanB4
18-09-2009, 02:59 PM
Id have a XLS, Procat and Bosscat.

One car not ont he list id have, the illusive TOPCAT!

Just concentrating on the epic 4WD kits for now, maybe 2WD in future if we're successful? :thumbsup:

i4n
18-09-2009, 04:55 PM
Al,

Loved those two at the time, can't justify the outlay for the comp. kits now though.

But if the Pro and Boss were re-released, well, I'd sell a Kidney to get them :thumbsup:

MOGGIE XL
18-09-2009, 05:14 PM
I think it's a great idea to re-release the old cars.I've been buying parts to restore my XL XLS and Top Cat for a few years but there hard to find these days.I hope it happens.

Kopite
18-09-2009, 05:22 PM
I'm with Chris, the one car i'd take a shot in the mouth for is a TOPCAT

FIT!

brian s
18-09-2009, 08:47 PM
there are two cat xls on ebay at the moment

Si Coe
18-09-2009, 09:35 PM
I've thought about this, and realise now that the business about MMS stuff is probably why I'd prefer a Procat. The Procat was the first version that didn't really need MMS diffs and layshafts, though they were better. The XLS used to kill standard diffs even with the motors of the day.

A simple re-release won't cut it. Todays cells and motors, even the milder stuff are much more than the early Cats were made for. They simply won't survive. What is needed is what Tamiya have done with the Buggy Champ - its not just a re-re Rough Rider, its been subtly re-engineered to look identical to the original, but perform more in line with 21st Century standards.

And quite honestly I doubt Schumacher will want to devote the time and money needed to do this to a 20 year old race car........

NeilD
18-09-2009, 09:38 PM
I've thought about this, and realise now that the business about MMS stuff is probably why I'd prefer a Procat. The Procat was the first version that didn't really need MMS diffs and layshafts, though they were better. The XLS used to kill standard diffs even with the motors of the day.

A simple re-release won't cut it. Todays cells and motors, even the milder stuff are much more than the early Cats were made for. They simply won't survive. What is needed is what Tamiya have done with the Buggy Champ - its not just a re-re Rough Rider, its been subtly re-engineered to look identical to the original, but perform more in line with 21st Century standards.

And quite honestly I doubt Schumacher will want to devote the time and money needed to do this to a 20 year old race car........

You're right they won't do that, Tamiya are a much bigger company and can afford the added costs Schumacher can't.

Chrislong
18-09-2009, 09:42 PM
Can't be that hard to do though, re engineer the diff cams to fit SX diffs, with wide gear for the belts and new layshaft, off it goes. Of the ballraced MMS steering was a big upgrade on the Procat, but the Bosscat steering was fine and should go straight on.

NeilD
18-09-2009, 09:44 PM
Come on Chris it's Schumacher so it's never that straight forward!

93works
18-09-2009, 10:31 PM
id dig an original swb,xl,xls and dont change a thing,i have heaps of old ni-cd packs that still have good punch,also motors & electronics. i reckon it spoils the look of the old cars with new electronics etc dont care how fast they go in comparison to new cars.

MOGGIE XL
18-09-2009, 10:58 PM
I agree,just keep everything original.The first Cat needed wing wire and role bars bending and were harder to build but I think it was worth it.

dangermouse
18-09-2009, 11:26 PM
I'd love to see them rerelease them.

I've got a pretty nice never run SWB, a few XLS's and a couple of Procat/bitsas.

I think if they were to be made they should come with an upgraded bosscat style transmission (original trannys were pretty crap) with slippers to handle more modern power, but otherwise keep them originalish.

Actually what I'd really like to see is a retro styled XLS based car with strong transmissions and modern suspension/tyres, but keep it looking original styled with the orig XLS shell. Something like what was done with this Hotshot:

http://tamiyaclub.com/showroom_model.asp?cid=65482&sid=418

DanB4
20-09-2009, 08:57 PM
Cat XLS seems to be the winner so far!

NeilD
20-09-2009, 09:36 PM
I think Schumacher would want a lot more numbers than we've mustered here to even comsidering a re re.

Funkymojo
21-09-2009, 01:05 PM
It'll be great if Schumacher would re re the CAT XLS. It's my favourite buggy all all time... :thumbsup:

ApexSpeed
25-09-2009, 03:55 AM
SWB. Yes.

If nothing else, re-pop the bodies and undertrays for the SWB. They are harder to find than hens teeth.

niggs98
25-09-2009, 07:48 AM
id love to say yes and have it be the swb cat but to be honest it was the xls that really took off. perhaps a masami version could be done, i know the xls was the same but the name would sell loads .....only question is how much would he want for royalties lol

BORMAC
25-09-2009, 10:55 AM
Damn it! Do we realy need to decide on just one? By far the best of the lot would be the Bosscat if you wanted to run a vintage schumacher as this was the last refinement on the original design and by far the most reliable if you consider the kind of power you want to lay down.
Aside from this the SWB car would possibly be the most desirable for the shelf as it was a handful to drive but also because its the car that started it all. Rereleasing the SWB car would be by far the coolest thing Schumacher could ever do as it would take the company back to its origins.
But for me it would by a tie between the XLS and PROCAT as they are both pre 1990 cars that did exceptionaly well back in the day. The XLS would be my pick of the two simply because of the chrome rims.....yeah Im a sucker for those chrome rims :drool:, what can I say...

DanB4
28-09-2009, 04:02 PM
All votes in?

gaza121
29-09-2009, 08:42 AM
"the car that started it all". Rereleasing the SWB car would be by far the coolest thing Schumacher could ever do as it would take the company back to its origins.
But for me it would by a tie between the XLS and PROCAT as they are both pre 1990 cars that did exceptionaly well back in the day. The XLS would be my pick of the two simply because of the chrome rims.....yeah Im a sucker for those chrome rims :drool:, what can I say...[/quote]

I know it off the debate a little but I thought the Kyosho Optima was "the car that started it all", When the Optima came out there wasnt much that could keep with it at my club, them the Cat XLS came out and wiped the fllor with the Optima!!

Lonestar
15-10-2009, 01:57 PM
awesome initiative - just linked this thread to the french forums... hopefully the extra jolt of votes will help make Cecil's scale tip the right side of warming up the Porsche! :thumbsup:

Paul

Fab69
15-10-2009, 07:40 PM
Yes !! i vote now.

Big UUPPP !! for the re-release Shumacher :thumbsup:

DanB4
19-10-2009, 01:58 PM
Keep them coming, I am sending Robin regular updates

mikeyscott
19-10-2009, 02:26 PM
I'd rather they didn't as I'd rather the values remain high - no I don't own an old Cat

I had a Procat many years ago

MOGGIE XL
19-10-2009, 05:24 PM
Who cares about the value being high.I love these old CATs for what they
are not how much they cost.It's a hobby not an investment.

DanB4
20-10-2009, 08:14 AM
Just an update guys.

Latest email from the big boss at Schumacher says they will be discussing this at their next engineering meeting.

Dan

Gray Beard
20-10-2009, 10:12 AM
It would be good to see how an old cat,running modern batts,motors and speed controlers, would perform against the current crop of 4wd buggies. I'm sure that if they were reproduced and spares became available again people would race them, either in a vintage class or up against newer designs.
My son and i have four XL/XLS/PRO cats and have tried them at the local indoor track,they went well, but the lack of easily obtainable spares ment that caution was needed. and yes my son did make it to the A final that night and mixed it with the "big fish in our small pond"..
I hope it happens, and i hope that they start at the begining with the swb (we never had one of those), and then maybe develop the rest of the range.

GRIFF55
20-10-2009, 10:56 AM
If the belts were beefed up etc, then i think it would be capable of running up there!! (or is it just my childhood memories taking over?:lol:)

super__dan
20-10-2009, 10:56 AM
Defo, you're dreaming lad!

Northy
20-10-2009, 11:11 AM
My Procat used to go well indoors a York against modern machines :woot:

CNA75
29-10-2009, 04:11 PM
Just an update guys.

Latest email from the big boss at Schumacher says they will be discussing this at their next engineering meeting.

Dan


Have put my vote in. Did the big boss say when their next engineering meeting would be held?

DanB4
29-10-2009, 04:36 PM
Have put my vote in. Did the big boss say when their next engineering meeting would be held?

No he didn't.

I'm conscious that I don't want to hassle him too much so will ask again next week ;)

Val
05-11-2009, 02:11 PM
I'd love to see a Cougar 2000 NIB re-release!:wub

Twister
12-11-2009, 12:36 PM
Brilliant initiative.. i never jumped on the cat wagon, i went with yokomo and optimas. It would be great to get another chance to drive one of the most sucsesful cars ever. So please mr C :cry: Go for it!

walden
30-11-2009, 10:52 AM
Any more news on the horizon :thumbsup:

Lonestar
08-12-2009, 08:20 PM
As there's more and more vintage racing classes organized around the world, I think there's a potential for these... Currently I race a fire dragon :cry: in the local vintage series, as I need a vintage racer with available spares and re-re's are the pragmatic way to go... but boy if Cecil re-re'ed any of the proposed cars, I'd jump ship in a second!!!

Additionnally, couldn't they just re-re a few of their bodies? I saw pics with the molds in an article from a few years ago... wouldn't take much work to restart the thermoforming machine!!!

C'mon Cecil, you know you want it too!

Paul

bondy
08-12-2009, 09:36 PM
Cecil has retired now ! Robin is the big boss now :thumbsup:

It would all depend on if they have all the origional molds and if its possible to use them on the uptodate machinery they have now ! To engineer the molds costs an absolute fortune Cecil told us on a team tour many years ago ! Chassis and ally plates are easy enough ! update a few other parts and it could be possible !

Perhaps they might bring something special to celebrate Phil Booths retirement in a few years !!! We could all buy one and a bit of the wonga goes towards a nice pressy for Phil Perhaps !! :D

Rookie
28-12-2009, 04:06 AM
i actually hope this dosnt happen coz my wife would kill me as i bought 1 of each LOOOL

MOGGIE XL
28-01-2010, 02:02 PM
Has anything been said about a possible re-release yet.If not a full car at least wheels and shells would be nice.

DanB4
28-01-2010, 04:24 PM
Sorry all, I failed:
-----------------------------------------------------------------------------------------------------
Hi Dan,
We have discussed it and the answer no for now. This project would be quite a big investment because some of the original tooling is no longer useable, or fits machines that we no longer have. We have given priority to new cars which we think will sell better than a re-release.
Regards
Robin

-----------------------------------------------------------------------------------------------------

Guess they have been concentrating on the new Cougar and maybe some others?

We tried!

Dan

BORMAC
29-01-2010, 11:20 PM
Yep the news sucks! Not that this suprises me though. While Cecil was a true gentleman and a pioneer of this hobby I dont think he would get much of a say now that Robin holds the reigns of the company.

Its dissappointing for lots of reasons but its kinda sad that Robin didn't make this his 'pet project'. This project would have been the perfect way to show respect for the man who started it all by working on re-releasing the car that put them on the map. If it had not have been for the CAT this company would never have taken off. To simply pass this concept off in lou of making money elsewhere is a sad thing to hear.

Im sorry if my comments upset anybody but Ive been a major fan of the Schumacher product for many years. Robin has missed a perfect opportunity to realy put Schumacher back on the map. Sadly money should not be the only reason a project like this is considered.

A sad day for me but one I half expected anyway.

Glenn
30-01-2010, 10:02 AM
Keep trying. I never had an XLS when it was first released but I always wanted one. :thumbsup:They are trading on e-bay at around £400 so a re-re would make good business sense. I can't see how they would lose money, especially if they re-engineer it to take LiPo and brushless systems. I think it could be a good club car.

The problem with all the re-re's is I want them all. I need a bigger house and an even bigger bank balance to get them. My vintage optima costs enough. Not sure my wife would be impressed......but I want one anyway.......;)

Si Coe
30-01-2010, 10:18 AM
Its not been 'passed off to make money elsewhere', its been shelved as financially not viable.
They'd need to make new tooling (which costs money) and divert resources from the Cougar SV (which should make money, so by diluting its develop will in effect cost Schumacher sales) for a car of limited commercial value.

If you look, the only people doing Re-re's are Tamiya. Thats because practically every kid in the world had a Tamiya at some point. They sell more to non-RCers who had one as a kid than to retro-collectors.
A Cat re-re would be great, but its not going to sell nearly as well as a Sand Scorcher re-re as it really only appeals to those who were racers in the late 80's.

Despite the interest here Schumacher have assessed that there is not enough demand to warrant the costs so aren't going ahead. Its a better way of showing respect to Cecil than bankrupting the company he created making an expensive model for a limited market!

Adam F
30-01-2010, 10:22 AM
I would imagine that tooling up an old car with fairly limited appeal could be a huge risk for Schumacher, injection mould tools cost thousands, plus the amount of design resource that would be needed, as I am guesing the old drawings are probably prety poor compared to todays standards and would need re-visiting...

I raced a Cat XLS/Procat back in the day and just bought another Procat only last week, but cant say that I would splash out on a re-re Cat, would love to see one, but dont think its anywhere near viable commercially..

Now if they would just re-release the Procat body's & belts that would be great :thumbsup:

BORMAC
30-01-2010, 11:26 AM
Some interesting points put forward.

I still feel the same though. Schumacher have spent atleast the last 5 years designing and releasing so many non race type vehicles that have had the 'basher' market (and a strong one at that) happy. Surely this has made the company money and probably more money that what was around back when Cecil held the reigns in the late 80's.
If i remember correctly Schumacher even sponsored the 1989 world titles here in Australia and Cecil was even offering out free Topcat kits to anyone that was entered into the worlds to compete. I bet that event cost a bucket load of money!
My point being Cecil's heart and sole went into these early Cat's which no doubt created the foundations for the company that Robin now controls.
Sure tooling costs money but if Cecil and his team could do it out of a little factory back in the day then I can't see how the Schumacher team couldn't do it now.
I dont think it matters how many kits they would sell but i bet they would sell a boat load of parts for the early cars. Hell I sold a second hand Cat on ebay around 12 months ago for $900usd. That to me screams just how many people are willing to spend good money as this was bid up to that price and people were happy to spend the money.

So what is the real cost here? While dollars and cents certainly add up to something but so does a company willing to invest in its roots and prove to the world that the early car was important enough to go to the trouble. That would scream serious cred to me.

More than my 2 cents worth.

gps3300
30-01-2010, 09:31 PM
So what is the real cost here? While dollars and cents certainly add up to something but so does a company willing to invest in its roots and prove to the world that the early car was important enough to go to the trouble. That would scream serious cred to me.

No....it would scream "madness"!!

Schumacher has a small fan base worldwide compared to Tamiya / Kyosho etc, and I'd much rather see them continue to design and develop recreational fun vehicles to ensure a profitable future & cutting edge racing buggies than spend a small fortune for 300 people to buy a vintage CAT re-release. These won't get raced, they'll get shelved - there'd be a peak in spares as collectors restore their cars, and then that's it, no more income. The comment "invest in it's roots" is cr*p - firstly Schmacher's roots were RC car components then 1/12th circuit cars, and secondly, what better way is there to invest in your roots than to continue making top-level competition RC cars? Why we're at it, why don't we campaign for Ford to re-release the Model T, or Peugeot to re-release it's range of 19th century pepper mills?....what would it say about those companies if they did that? :eh?:

CNA75
25-02-2010, 07:32 PM
I'm largely with Bormac here.....

I have to say that I think this is a big shame. I can understand the commercial rationale from a strictly financial perspective, but goodwill (being a key ingredient of a company's value) for a company is not all about margins. It's also about a brand and celebrating one of the most successful eras for Schumacher (i.e. late 80's) would be a strong/the best way (a way tried and tested by many companies before) to celebrate and uphold their iconic racing brand.

I see that someone in this thread previously quoted car manufacturers. Well Ford have done this with the GT40, VW have done it with the Beatle, and BMW have done it with the mini. Morgan continue to make the car that made them famous decades ago. All of these are celebrations of previous icons on which the relevant companies were built and are deliberately to a large extent manufactured for the purpose of maintaining heritage/prestige/brand of the relevant companies.

I wonder if, rather than doing a re-re, Schumacher could utilise those tools which they still have in order to manufacture spares for their old cars. That way, they save on the investment of rebuilding past tools which no longer exist but allow people to source a number of parts for their old cars thus allowing the commercial market to maintain the brand, from a heritage perspective (to some extent, at least!).

I know that they are still able to produce some products for their cars of the late 80's, although I can't say how many....just seems a no-brainer to me (no investment required by Schumacher other than raw materials to make the parts - they'd easily cover their costs with a healthy margin on the rrp for such parts)...

QuackingPlums
26-02-2010, 08:59 PM
Ah well. I'm cancelling my Cougar SV order and holding them to ransom until Robin changes his mind... :p

Adam F
01-03-2010, 08:36 PM
I'd be amazed if the tools still exist, or that they still have the moulding machines that suit the old tooling.. These things take up some serious space!

Not to try and start an argument, but the cars mentioned in the above post are all completely new cars, using modern technology and design but with some retro q's from the old car... (Morgan being the exception, but they are not really in the same league)

Brand/heritage is all very nice and yes it does have some value, but I would rather they didn't make a re-re cat and stay in business, rather than make a flawed sentimental decision and go bust.... :(

Peakey
20-07-2015, 09:18 AM
I'm bumping this back up out of interest

Maskellator
20-07-2015, 10:01 AM
Well, it hasn't happened in the last 5 years, but Hell yeah I would be damn keen on a re-release of any of those. I voted XLS.
Hopefully with the popularity of the Kyosho re-releases and historic rc racing in general I think it would be an inspired decision by the lads in Northampton!

Suzukitudor
20-07-2015, 11:14 AM
That would be the one for me.... Any chance of a seperate request!!!
http://www.racing-cars.com/sitepage/images/top_cat_500.jpg

Peakey
20-07-2015, 11:26 AM
I think there would be people queing to buy any of the kits, I for one would take the top for of those on an instant.

OptimaFan
20-07-2015, 12:19 PM
Well, it hasn't happened in the last 5 years, but Hell yeah I would be damn keen on a re-release of any of those. I voted XLS.
Hopefully with the popularity of the Kyosho re-releases and historic rc racing in general I think it would be an inspired decision by the lads in Northampton!

Hear, hear!

Retro RC
20-07-2015, 07:23 PM
Yes please XLS for me I've got a new built pro cat, nib bosscat and a new built c2 works so that would be nice in the line up👍

Adam F
20-07-2015, 08:05 PM
Is there much interest in the older Cats at the moment?

I have two SWB's and two XLS that I wanted to sell, but judging by eBay the market is pretty slow for these at the moment?

redric11
20-07-2015, 08:55 PM
I would love a cat swb as thats what i wanted when i raced as a kid.always had kyosho but a std swb cat that floats my boat would be great if they rereleased them.

Retro RC
21-07-2015, 07:24 PM
Is there much interest in the older Cats at the moment?

I have two SWB's and two XLS that I wanted to sell, but judging by eBay the market is pretty slow for these at the moment?

There's definately a want out there it's just finding a complete buggie in good condition that's not at a ridiculous price

OptimaFan
21-07-2015, 08:36 PM
There's definately a want out there it's just finding a complete buggie in good condition that's not at a ridiculous price

Yep, quite a few offerings I've seen listed on eBay are pretty expensive, and when you study the pictures, it becomes obvious that some extra investments are needed to get the car completed. Sometimes prices for used parts are asked where a couple of parts would cost about half the price of a mostly complete car, having those parts on, and a lot more. I think I can almost get 2 Optima Mid cars for the price of a vintage Cat.

cjmurph
26-10-2015, 03:38 AM
Making a comment to keep the idea alive.

I completely understand why they don't do this, however, I think it would be harder to justify not re-releasing a 2wd simply due to associated re-releasing the rc10.
Vintage racing seems to be reasonably popular in general (it's certainly a heap of fun), and every other car I've seen racing is an rc10. Most of them re-re. Given the easier entry to vintage racing with a re-release I think 2wd is the only way you would have a hope in hell of it making you money, since there are simply more cars/parts around, and therefore more opportunity to race and get involved at a reasonable non vintage price.
I love racing my cougar 2000 against a sea of rc10's, that thing is a rocket ship, but when I crash everyone on the stand cringes and wonders if they'll ever see me again.

Alternatively, I'd suggest this.

If you're not going to make the kits or parts any more, release the drawings. let us make our own. It's been declared by schumacher that it doesn't make financial sense to re-tool or re-release so open up your designs that are more than 20 years old so the public can keep their favourite toys going. Now that would give some serious cred.

I voted bosscat by the way, I loved my bosscat, I'd slap 16 year old me if I saw him selling it... oh well.

DanB4
01-02-2017, 10:11 AM
At last :)

http://www.racing-cars.com/products.asp?hideall=Y&partno=news760&templateid=18&pagewidth=550

Retro RC
01-02-2017, 10:19 AM
Ha ha beat you to it and pre ordered already lol:thumbsup:

Peakey
01-02-2017, 10:21 AM
Ha ha beat you to it and pre ordered already lol:thumbsup:

Ha ha ha you really think you did :lol::lol:

Retro RC
01-02-2017, 10:24 AM
How many did you pre order dan ;):lol:

DanB4
01-02-2017, 10:56 AM
:) :)