PDA

View Full Version : Good day...


restimax
05-10-2009, 05:42 PM
Yesterday, my second race with cat sx....

first qualifing:
crack rear arms...
second qualifing:
seize two ball bearing of the front diff.
third qualifing
broken the front diff outdrives...
and...
i'm back to home....:cry::thumbdown:

i'm very disappoint.

David Church
05-10-2009, 05:46 PM
Thats not a good day then???:cry:

It is worth contacting Schumacher direct and telling them these problems, I am sure they will sort you out.

I had a number of breakages on my car when it was new, but once it settled in it has been one of the most reliable car I have ever had!!!
Don't give up on the Cat yet, it is a great car!!!!!!!!!!!!!:thumbsup:

mikeyscott
05-10-2009, 06:00 PM
Been racing over the summer season and haven't broken anything yet. Had problems with a rubbish built Phil Booth edition (I took it apart and started again).

Contacted Schumacher, but no response.

Hopefully the car will remain solid otherwise as I've just ordered the new chassis, top deck and LIPO holder for the humped LIPOs

restimax
05-10-2009, 06:24 PM
Thats not a good day then???:cry:



:p
wonderful this pic...

http://img28.imageshack.us/img28/4986/dsc0014xn.jpg (http://img28.imageshack.us/i/dsc0014xn.jpg/)

i think to change brand...:(

this is my second race with cat and without any results...

lochness42
05-10-2009, 06:30 PM
Well you've got old outdrives and that doesn't surprise me you've broken them.

Personally I've broken only one outdrive on my diff, one ballbearing and few spurs over whole season. I find it very good and I really hope you'll stay with schuey. It does worth it.

restimax
05-10-2009, 06:36 PM
in 2 races, 1 front body shock broken, 2 diff. outdrives, 2 carbon front shock tower...and 2 ball bearings...
this car is not bullet proof....is a glass car...:lol::cry::(

mikeyscott
05-10-2009, 06:37 PM
Got to say what did you hit?

restimax
05-10-2009, 06:41 PM
Got to say what did you hit?

my mistake on landing from ones big jump...:D

but broken 2 ball bearings and 2 diff outdrives are not my mistakes....:D

bigred5765
05-10-2009, 06:42 PM
things like that only break if you crash, and crash hard,we have tested the car and broke next to nothing,
the out drives usually break if you have to much up travel, make sure the drive shaft doesn't enter in the diff out drive on full travel, we have moved to longer ball cups on the shock shafts to stop this.ps most of are bearing ars close two 3 months old nps yet.

David Church
05-10-2009, 06:43 PM
The plastic gear box top housings do break, but the do an alloy one that is very strong, have not broken any all year!!!
Thats what broke in your pic.
But it does sound like you hit a brick wall at 30mph!!!

Did you buy this car new or used???

restimax
05-10-2009, 06:55 PM
The plastic gear box top housings do break, but the do an alloy one that is very strong, have not broken any all year!!!
Thats what broke in your pic.
But it does sound like you hit a brick wall at 30mph!!!

Did you buy this car new or used???

used but in very good conditions...our track in italy is very dangerous....:thumbsup: but only i'm back to home, i have not a outdrives spares in my pit box...:cry:

restimax
05-10-2009, 06:56 PM
schumacher drivers put the grease on to internal ball bearing?

bigred5765
05-10-2009, 06:59 PM
haven't even cleaned ares in 3 months :(
seem ok

David Church
05-10-2009, 07:01 PM
Schumacher will replace the old outdrives. And its a good idea to keep an extra diff in your pit box!
And you def need to check the drive shaft is not hitting the diff.

restimax
05-10-2009, 07:03 PM
haven't even cleaned ares in 3 months :(
seem ok

yep, the same with my all cars....
but me and other guy in italy have problem with ball bearings....me with 2 of the diff front total fused and the other guy with one explosed on the front diff...
the dirt of italy destroy the schum ball bearings?:confused:

restimax
05-10-2009, 07:07 PM
Schumacher will replace the old outdrives.

:confused:

migsy
05-10-2009, 07:09 PM
:p
wonderful this pic...

http://img28.imageshack.us/img28/4986/dsc0014xn.jpg (http://img28.imageshack.us/i/dsc0014xn.jpg/)

i think to change brand...:(

this is my second race with cat and without any results...

max, you could always return to the pred.. me thinks wise move if wanting results!!!!!;)

David Church
05-10-2009, 07:12 PM
The old outdrives had holes in them, these were proven to be a little weak and broke if they hit the driveshaft, they were replacing these old outdrives with new solid ones.

restimax
05-10-2009, 07:19 PM
max, you could always return to the pred.. me thinks wise move if wanting results!!!!!;)

if i change, i change to improve my results...not the viceversa....:thumbsup:
i have close with pred and xtreme.;)

discostu
05-10-2009, 07:20 PM
were you running them tyres you probably broke it cos you didn't have enough grip hense you crashed if you crash you will break things on any car but if you feel you need to change car thats cool a least us happy cat owners wont have to listen to you slag the car off though your own mistakes.

sorry if thats a little harsh just a little fed up of people moaning.

discostu
05-10-2009, 07:24 PM
sorry mis read post thought you were racing on a different race track it may not be tyres that caused you to crash however you still stacked it and thats the way it goes the bearing may be somthing to do with lack of oil and maintance

MattW
05-10-2009, 07:32 PM
Talking of the parts you've broken - as the others have said, those are the early type diff outdrives, I use them in the front and have never broken any there, but have broken quite a few in the rear. Shock towers, probably only ever done 1. The top bullkhead - well, if you're breaking towers, then i guess it's not a huge surprise that the plastic tops are breaking.

Generally the Schumacher bearings are very very good, I really can't fault the ones that they are putting in the kits these days.

restimax
06-10-2009, 08:22 AM
but schumacher change the old outdriver without any cost?:confused:

Snappy
06-10-2009, 01:02 PM
I seem to go through rear wheel bearings -Have destroyed at least 2 at the last race meeting and have 4 that are very gritty:confused:. I'm now trying aftermarket bearings with rubber seals on one side to see how it goes:thumbsup:.

Have also gone through a couple of front wheel bearings but they seem to stand up better.

Apart from bearings the only thing I broken is a front CF link. I feel the CAT is a pretty strong car considering I've been hacking the thing around and have had some very big stacks.:cry:

Compare this to my B4 - broken front and rear arms, rear chassis plate, bent drive shaft, wing mount etc etc. The only thing that seems stronger are the bearings compared to the CAT.;)

restimax
06-10-2009, 01:14 PM
I seem to go through rear wheel bearings -Have destroyed at least 2 at the last race meeting and have 4 that are very gritty:confused:. I'm now trying aftermarket bearings with rubber seals on one side to see how it goes:thumbsup:.



you run on dirt?

stefke
06-10-2009, 02:29 PM
If you crack the front shocktower and/or the upper bulkhead, you probably crashed in a way that would break any car. I've only seen one shocktower go all season. The Cat seems pretty strong in that area.

The old type outdrives can break if you don't use uptravel limiters and put the diffs in the "low" position. I've used the old outdrives for about 6 months before I broke the rear outdrive at the Belgian GP. Since I replaced them with the new ones, I never had a problem again. Contact Schumacher and ask for a replacement.

I'm surprised you have so much problems with the kit bearings. They are pretty good (especially compared to 90'ies Schumacher bearings in my old CAT 2000 :D). I only had one rear wheel bearing go when I tested the arm/shock reverse kit. I'm guessing because of the extra stress on them caused by the increased driveshaft sweep. But those bearings were about half a year old and had already seen considerable abuse.
I even find the kit bearings more reliable then the ceramic option set I installed about 2 months ago. The ceramic bearings had less tolerance to dirt and have to be cleaned regularly.

And yes : we also run on dirt and clay

Snappy
06-10-2009, 02:30 PM
you run on dirt?

Yes mate. Hard packed clay. All the tracks in Sydney are a similar challenge with dust and dirt.

Seems the factory bearings don't cope well. I'm not even sure cleaning the gritty ones is very satisfactory because it seems when I clean them they last 1 or 2 runs and are gritty again.

Reading some of the earlier posts - if I could get 6 months out of the bearings I would be thrilled but I think I'm never going to achieve this with the tracks over here.

restimax
06-10-2009, 04:51 PM
Yes mate. Hard packed clay. All the tracks in Sydney are a similar challenge with dust and dirt.



the same of the italy!
before of this i have drive a pred for 3 years and nobody problem with ball bearings!the maintenance is the same.:thumbdown:

restimax
07-10-2009, 02:00 PM
this morning i have write to schumacher, for the diff outdrives.
schumacher send me a full set of new outdrives with the new design, without any cost...:thumbsup:

Thanks to schumacher.

David Church
07-10-2009, 06:30 PM
this morning i have write to schumacher, for the diff outdrives.
schumacher send me a full set of new outdrives with the new design, without any cost...:thumbsup:

Thanks to schumacher.


:thumbsup::thumbsup::thumbsup: