View Full Version : Servo for Cat SX
Hi
Am in process of buying a Cat SX lipo. Can anyone tell me which decent servos fit without any messing around - have not driven a 4wd buggy for about 15 years so a bit out of touch with how quick/powerful I need. Will be run on a bumpy astroturf track.
Thanks for any help
Rob
bigred5765
03-11-2009, 08:44 PM
savox work and fit perfect,
mikeyscott
03-11-2009, 09:08 PM
Got a Sanwa in mine with no problems
coolcars782
03-11-2009, 09:16 PM
The Team Orion Servos are great, Super Super Fast - http://www.modelsport.co.uk/?CallFunction=ShowSpecification&ItemID=31191
or you got the cheaper low profile savox servo only 0.02 seconds slower - http://www.microtechracing.com//product_info.asp?name=SAVOX+SC1251MG+DIGITAL+SERVO +-+LOW+PROFILE&ID=19639&Pcat=RADIO%20GEAR&cat=SERVOS
mikeyscott
03-11-2009, 09:17 PM
My Sanwa I have to say is too quick so I have slowed it down on the EX10
Looking back I'd go fro something slightly slower
mdb_75
03-11-2009, 10:49 PM
My 1258 Savox works well in my Cat, but when using lipos it's not deep enough for the lipo to rest against it -this is when using the Atomic Carbon Lipo retainer. I've had to put a 5mm or so thick spacer onto the back of the servo for the lipo to rest/locate against. I did have an AE 1313 in there and that was the correct length. I found that servo a little too slow though.
niggs98
04-11-2009, 07:34 AM
gm have recently released a range. will fit the cat without issue and a very nice price to. see the schuy site for details ;)
stegger
04-11-2009, 12:10 PM
I did have an AE 1313 in there and that was the correct length. I found that servo a little too slow though.
What you need then is the AE ds1015 ;) which is what i had in my recently sold cat LiPO, worked very well and is for sale ;) pm me for details. :)
mdb_75
04-11-2009, 06:23 PM
What you need then is the AE ds1015 ;) which is what i had in my recently sold cat LiPO, worked very well and is for sale ;) pm me for details. :)
You are correct, but I'm happy with my Savox now thank you! :p
lochness42
04-11-2009, 07:01 PM
Using Savox servo without problems. GM servos should be good as well.
eichkay
06-11-2009, 12:29 AM
I use the Futaba 9551 low profile in my cat.
t.o. rob
06-11-2009, 12:49 AM
I run Hitec HS-7955TG for carpet and astro-turf. I also put a little dab of automotive clear goop under the servo and use clamp to keep it snug until it dries.
mikeyscott
08-02-2010, 03:54 PM
What servo horns are people using with the Savox servo?
KinWild
09-02-2010, 12:37 PM
Futaba
Ben.G
09-02-2010, 05:58 PM
Been using a ACE servo there mint never had no problems with them either and fits a treat :thumbsup:
Highly recommended:thumbsup:
chatts#725
09-02-2010, 07:46 PM
If you dont want to put a load of cash into a servo then i use a BLUE BIRD BMS 630MG in my sx, fits well used it for a year with no probs whatsoever and costs just over 20 quid:thumbsup:
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.