PDA

View Full Version : trf511 vs dex410


pete68
20-11-2009, 06:23 PM
trf511 vs dex410 anyone have tried both and your oppinion
would be really appreciated
the price and parts support doesn't make a
difference since i will have parts in stock!!
thanks
pete68

jhammond
20-11-2009, 06:31 PM
Ah...

Well, I own a 501x and am very happy with it. (A 511 would just be less hassle with maintenance.) Though, honestly, the DEX410 does look like the future. So much less maintenance required and it's a completely different sort of platform. Built from the ground up for modern racing. Having said that, the Tamiya is still very good. (After all, just look at the 2009 EFRA results, they also run pretty well out of the box.)

In my opinion, they're so vastly different that they're barely worth comparing. (Like iPhone and Blackberry: they both do different things so well, it's more of an instinct and personal taste sort of thing.)

Unfortunately, I haven't tried a DEX410, so obviously biassed towards the Tamiya. Though I can see why so many people are opting for the DEX410!

Alex H
25-11-2009, 08:47 PM
I owned a TRF511 and it was the best 4wd I have ever had the pleasure to drive. Then came the DEX410 and I just had to have one.
Can honestly say that it doesent matter what car you buy. Two of the best cars in the market. Everything else feels like toys.
The TAmiya has got some amazing corner speed on graveltracks and the dex seems to do the job just as good. Havent had the chance to try it out really yet on gravel. Love my dex and loved the trf511 too. A must is the diffcover of Fredrik Emilsson.
What ever you want it is two top of the line machines.

B44&501xRacerEX
26-11-2009, 08:18 PM
I have to say I really like my 501x worlds car, but I do tend to drive my B44 sometimes as well depends who shows up with what. The Dex410 looks really awesome looking, but I do tend to prefer parts support over anything else. And it's easy to get parts for my 4wd buggies. The Dex410 wouldnt be so hot for me because I live in the United States. People at my tracks either run the B44 or the Kyosho Lazer ZX5 FS. I'm the only one with a 501x now, so I
guess that makes me feel kinda special to have a car nobody else runs.:thumbsup:

BushyAR15
28-11-2009, 05:04 AM
I too would really like to know the answer to this question as well...

I've had the CAT SX, B44, TRF501, and now the TRF511. I'm curious about the DEX...There is a big price difference here in the USA between the DEX and every other 4WD.

For the US style tracks I've run, I've found the B44's front end to be too fragile, the CAT SX too twitchy. Took way too much work to get it to handle well and stripped spur gears.

The TRF501 handles great and in the two years I've raced it, only broke a couple parts that were my fault.

The TRF511 handles great but the standard arms are weak and break constantly...

I want to know if the DEX is the shiznits....

TIA

AaronR
28-11-2009, 12:41 PM
Simple fix for that Bushy... use your 501X arms on your 511. I did that when I built my 511 and not one broken arm yet.

pugs
28-11-2009, 04:26 PM
Simple fix for that Bushy... use your 501X arms on your 511. I did that when I built my 511 and not one broken arm yet.

yes you can do that but be carefull, if you get a heavy inpact with the 501x wishbones it can bend the alloy parts, I tend to use a db01 wishbone set there stronger than the 511 but weaker than the 501x;)

Jan Larsen
28-11-2009, 05:42 PM
Also, the harder arms will bend the hingepin if hit hard enough, so keep one in spare just in case.

AaronR
29-11-2009, 07:24 AM
Hinge pins can bend, yes, but they are cheap. A package of 4 pins are about $2 USD.

TonyV2382
24-08-2010, 06:01 PM
I have to say I really like my 501x worlds car, but I do tend to drive my B44 sometimes as well depends who shows up with what. The Dex410 looks really awesome looking, but I do tend to prefer parts support over anything else. And it's easy to get parts for my 4wd buggies. The Dex410 wouldnt be so hot for me because I live in the United States. People at my tracks either run the B44 or the Kyosho Lazer ZX5 FS. I'm the only one with a 501x now, so I
guess that makes me feel kinda special to have a car nobody else runs.:thumbsup:

STFU....MOVING ON...

Now to really answer your question...I owned both cars. I cant tell you this. Maintenance on the dex410 will save you time. You can change diff oils replace the diff and adjust the slipper in under 15 mins if you were determined to do so lol. With the tamiya cars it used to take me a real long time to get to the spur or the diffs. Also the ball diffs were a huge hassle. Are they too tight, are they too loose. It gets old. BUT...they both handle very well. I can honestly say, that the dex does everything well. On outdoors and indoors. so thats versatility. On outdoor tracks with the 501 I had to replace belts and rebuild diffs after every run. In the durability dept. the R version of the DEX has a weak point with the front plastic brace. Get the ally one and ur good. Arms never brake, hinge pins never bend, shocktowers never an issue. Only thing to worry about is the drive shaft pins. Read on durangos tips to build those right. 501/511...Arms do break and with that pins will always bend. rear wing mount is a joke and always gets loose. shock towers are surprisingly strong, never broke one. body looks amazing. it looks stunning in all aspects but is a bit fiddly when it comes to maintenance issues and arm/ hinge pin breakage. I remember I had to stock up on pins and arms all the time. as well as front shock shafts. Rear wheel wobble is also an annoying thing and the 12mm hex conversion made it handle worse in every way.

when properly set up and if driver skill is not an issue, then both are remarkable on the track. I really enjoyed my 501, even though you are discussing the 511, its not far off. The reason in the end that I sold my 501 was the maintenance issue. Too much going on. No matter how well you wire you motor leads or servo wires one day something will come loose and catastrophe will strike. I once had my servo mounts come undone and since they run parallel to the front belt, the belt got caught on it and snap! lost the race...DNF.

Not saying the shafts in the dex dont get in the way, but they will not cause such a huge problem. and as I said...removing the spur is literally seconds...removing the diffs...4 screws. You just cant get that with ANY other buggy.

Yes I know this is a late reply but I felt the need to add to it for any future inquiries.

Jan Larsen
24-08-2010, 06:10 PM
The belts last a very long time (half a year if you race every weekend) if you adjust it properly. Mine is 1,5 years old and only on its 2nd rear belt. Front is the same.

Also, how the hell did you manage to have a servo mount come undone?!? The things are made in plastic and impossible to come undone once screwed in.

To me it sounds like operator error big time.

TonyV2382
24-08-2010, 06:25 PM
Nope...def not an operator error my friend. I know the belts are strong but if u go out on a US style track with dirt everywhere and debris...belts will be the death of the car and ur pulleys. And yes the servo mounts do come undone and I was advised to go aluminum and thread lock it to stay in place...and this was fro ma team driver out here in the states.

TonyV2382
24-08-2010, 06:28 PM
I also ran on the same track with a cat sx. We both always had the same problem. REPEATEDLY

mof
24-08-2010, 06:47 PM
STFU....MOVING ON...
On outdoor tracks with the 501 I had to replace belts and rebuild diffs after every run.

I run outdoors all the time, I haven't got any issues with the belts or constantly needing to rebuild the diffs on my 501. I am using the newer, more durable, drive belts that come with DB01R and 511.


501/511...Arms do break and with that pins will always bend. rear wing mount is a joke and always gets loose. shock towers are surprisingly strong, never broke one. body looks amazing.


I agree that the 511 arms brake easily, but to brake a 501 arm you really have to try, like drive full throttle at a concrete wall...

Pins might bend and arms might brake if you hit that concrete wall, though :)

As for 511, the arms brake more easily and thus the pins don't bend as easily as in 501.


Too much going on. No matter how well you wire you motor leads or servo wires one day something will come loose and catastrophe will strike. I once had my servo mounts come undone and since they run parallel to the front belt, the belt got caught on it and snap! lost the race...DNF.

Not saying the shafts in the dex dont get in the way, but they will not cause such a huge problem. and as I said...removing the spur is literally seconds...removing the diffs...4 screws. You just cant get that with ANY other buggy.


Ever heard or seen or read what might happen to a DEX when a pin comes loose from the drive shaft...? Yes, it is what you could describe as a huge problem (flame out :thumbdown:). And yes, it does happen. For the newer models this problem should be sorted, though.

Jan Larsen
24-08-2010, 06:57 PM
The Cat SX belts are not very strong (regardless of surface), I'll agree with you on that, but the belts on the 511 is a lot better.

We race on any surface, in any weather, and have not heard or seen what you report at all. Thats why I'm hard pressed to believe you.

TonyV2382
24-08-2010, 07:02 PM
I run outdoors all the time, I haven't got any issues with the belts or constantly needing to rebuild the diffs on my 501. I am using the newer, more durable, drive belts that come with DB01R and 511.



I agree that the 511 arms brake easily, but to brake a 501 arm you really have to try, like drive full throttle at a concrete wall...

Pins might bend and arms might brake if you hit that concrete wall, though :)

As for 511, the arms brake more easily and thus the pins don't bend as easily as in 501.


Ever heard or seen or read what might happen to a DEX when a pin comes loose from the drive shaft...? Yes, it is what you could describe as a huge problem (flame out :thumbdown:). And yes, it does happen. For the newer models this problem should be sorted, though.

LoL...Yes lipo explosions...if you dont follow the tips they give you. Newer models are fine. My car is perfect. As for newer drive belts that are stronger maybe...but dude those of you who tell me you dont break a-arms on ur 501/511/db01s must be delusional. I found the 501x versions were strongest, the 511 "high traction" arms were, for lack of a better word, pathetic examples of an a-arm and the db01's were ok but due to the added flex, they broke too. I dont drive like an idiot nor do I bash. And these parts DO break. Theres even a video on this thing on youtube, I think rclazy something or other posted it. Its a weak point guys, its a fact. I never said the car sucked. It handles great. But maintenance wise...cmon...how many screws to access your diff? lol Remove top deck, remove front shocks, remove camber links. cmon. I know this is a hobby but driving more and fixing less its where its at. ;)

Also to access/change ur spur...you have to go through the same song and dance...Uhhh pull a clip theres ur spur on a rango :)

TonyV2382
24-08-2010, 07:06 PM
The Cat SX belts are not very strong (regardless of surface), I'll agree with you on that, but the belts on the 511 is a lot better.

We race on any surface, in any weather, and have not heard or seen what you report at all. Thats why I'm hard pressed to believe you.

Hey man, to each his own. I dunno your track conditions, But I know whatIve experienced. Running on an indoor carpet or astro...I had no issues. Outdoors with some dirt or indoors too for that matter...pulleys got chewed up, small rocks got inside the rear diff all the time. I mean guys if something can go wrong it will. And I even had the rear optimized diff cover. :thumbdown:

Jan Larsen
24-08-2010, 07:10 PM
FYI, access to diffs on the 511 is 4 screws front and rear. Access to the spur gear is 4 screws and a trick to remove the layshaft assembly without having to loosen anything else.
And yes, the 501 arms are nearly indestructable.

TonyV2382
24-08-2010, 07:19 PM
FYI, access to diffs on the 511 is 4 screws front and rear. Access to the spur gear is 4 screws and a trick to remove the layshaft assembly without having to loosen anything else.
And yes, the 501 arms are nearly indestructable.

Yes Ive heard the 511 is way easier to maintain. But you know what they say..fool me once shame on u fool me twice....eh u get it lol. I just had to go with my gut when I bought my new car.

I know the trick to remove the layshaft and it was a hassle still. Dont get me wrong I loved ALL of my tamiya rides cuz when they were on point they were on fire. But there was always this nagging thing at the back of my head as if I was waiting for "the moment" it all went wrong.

TonyV2382
24-08-2010, 07:23 PM
I started with a fully hooked up DB01. It had every option known to man on it. I had so many spares from the stock kit I actually built a second one and gave it to a friend to come race with me. Each of us always had the same problems. Needless to say because he was strictly a 1/8th scale guy, this first experience with electric turned him off to it.

Bottom line...it just has to work right the first time. A broken arm here or there, a broken c hub, or even a broken shock tower is FINE with me. but drive line issues? sorry Ill pass.

shanks
24-08-2010, 08:26 PM
Get a laser fs2 pal

You won't have any of the problems with both cars mentioned above

And I bet you'll be quicker with a lazer then both cars

TonyV2382
24-08-2010, 08:43 PM
lots of guys run the lazer at the track. Good car and smooth. But I found my car of choice Im good.

Fredrik Emilsson
24-08-2010, 08:56 PM
And soon will a Ass or Yokomo driver say that his car it the best buggy.

What a surprise!;)

Rich D
24-08-2010, 10:18 PM
Only parts i have broken on my 511 have been front arms and std front shock towers. I use the std arms - high traction. They have never failed to the point where i havent finished though - they usually crack. Would rather crack an arm than bend alloy parts. I agree, the std arms are weak. Tamiya even write on the package that they aren`t the strongest ! Something along the lines of " for professional use only, use part number **** for more durability "

As for the rest .......

Never had any issues with the wing mount coming loose, the belts or pullies wearing or breaking, the diffs being too tight or too loose nor needing to be rebuilt after every run as you describe. Your servo mount came loose cos you didnt do it up properly, you used an alloy screw, or it had been in and out so many times that the threads were worn on the mount.

Steel screws that self thread into plastic dont vibrate loose. Thats a fact. Don`t wish to piss on your fire or be rude but frankly it doesnt sound like you bolted certain parts of your 501 together right in the first place dude. Sorry !

This in particular ...

Too much going on. No matter how well you wire you motor leads or servo wires one day something will come loose and catastrophe will strike. I once had my servo mounts come undone and since they run parallel to the front belt, the belt got caught on it and snap!



Is complete rubbish if its built correctly. Any car will drop to bits if the person bolting it together doesnt do it correctly.

The Durango is a great car though. you`re right ! - i`d have one if i wasnt happy with my Tamiya :)

Rich D
24-08-2010, 10:28 PM
FYI, access to diffs on the 511 is 4 screws front and rear. Access to the spur gear is 4 screws and a trick to remove the layshaft assembly without having to loosen anything else.
And yes, the 501 arms are nearly indestructable.


Interested in this trick Jan - ive never had to change spur as yet but it would be handy to know :)

mole2k
25-08-2010, 12:33 AM
I've ran my 501x for 2 years racing weekly on a wide variety of high grip and low grip surfaces.

So far total breakages on this car are:
Rear Wishbone, landed short on a huge triple running on a 1/8th track with a 4.5
Front Shock Tower, hit a wall flatout
Front Shock Shaft, landed nose first off a jump into a block

I've never had to replace any pulleys, the belts I replaced once as they where starting to look a little tatty. My diff's go months between rebuilds and never lose any smoothness, I just re-grease them every so often. I've never had to remove camber links or the shocks to get the diff's out either, there is plenty of room to manoeuvre them in and out with the shocks and camber link's left on.

I wouldn't say the DEX is a bad car, I would love one myself but I have to say the Tamiya doesn't need much maintenance to keep it going well.

Jan Larsen
25-08-2010, 02:22 AM
Rich, the trick is as follows; undo the four screws (obviously), then pry each belt, one at a time, to the side of the pulley and turn the wheels. Eventually, with some force, it'll slide off. Do the same to get it back on again.
Its a little tricky but can be done. I wouldnt recommend it though if you're not in a hurry. Its a little tough on the various parts, but it wont flat out break them. It can be done on the 501 aswell.

mof
25-08-2010, 05:40 AM
I don't see screw count as an issue... it is really not that much of a difference if you have to screw 4 screws instead of 8 to access the diffs. And besides, you could mod the top decks (cut them under the shock tower bulkhead) on a 501 so you could access the diff by opening just 4 screws.

Accessing (removing it, changing pinion etc) the motor on a 501 is, on the other hand, not very handy. But it is fixed on the 501.

Welshy40
25-08-2010, 06:04 AM
Ive not broken any wishbones yet but do agree the plastics tamiya use are the worst quality and for a company thats been going this long should have learnt by now. Diffs well they are rough and worse than my lazer zxr ones and they were bad but they still work fine with my gearbox covers on to stop dirt getting in. Other than that and three broken spur gears and a faulty layshaft the cars been a dream.

cmgreen
25-08-2010, 06:53 AM
trf511 vs dex410 anyone have tried both and your oppinion
would be really appreciated
the price and parts support doesn't make a
difference since i will have parts in stock!!
thanks
pete68

Simples, The 511 is now discontinued and the DEX 410 aint ;)

mof
25-08-2010, 07:05 AM
Simples, The 511 is now discontinued and the DEX 410 aint ;)
And this is a fact? Url or it didn't happen ;)

helmet993
25-08-2010, 07:14 AM
And this is a fact? Url or it didn't happen ;)

No ETA from Tamiya USA on stock...and Tower shows it as discontinued:

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXWXX8&P=7

RC Mart also replied to my recent inquiry that it was discontinued...

mof
25-08-2010, 09:18 AM
As far as braking the arms on a 501 goes, here is a quote from the DEX410R review here at oOple.

"The suspension arms are (identical to the DEX410) moulded with plenty of glass or and are proven to be really tough - possibly too tough depending on your point of view since something else might well break instead of these arms. I bought some spare sets for the original car and never used them - it seems the Tamiya TRF501X finally has a match in the toughness stakes."

As I understand that quote, the 501 arms are (according to the writer) one of the toughest available, and before the DEX came possibly the toughest available.

mattybucks
25-08-2010, 10:29 AM
Round 1 Euro's Qualifying:

Fastest: Lee Martin (Tamiya) 12/315.97

Case settled.

Carno
25-08-2010, 10:51 AM
Round 1 Euro's Qualifying:

Fastest: Lee Martin (Tamiya) 12/315.97

Case settled.

The 201 beats the 511 and DEX410? ;)

Rich D
25-08-2010, 12:13 PM
Rich, the trick is as follows; undo the four screws (obviously), then pry each belt, one at a time, to the side of the pulley and turn the wheels. Eventually, with some force, it'll slide off. Do the same to get it back on again.
Its a little tricky but can be done. I wouldnt recommend it though if you're not in a hurry. Its a little tough on the various parts, but it wont flat out break them. It can be done on the 501 aswell.

Cheers for the info my friend :)

shanks
25-08-2010, 02:31 PM
And soon will a Ass or Yokomo driver say that his car it the best buggy.

What a surprise!;)

I've had a 501 And a Durango and now a lazer

Carno
25-08-2010, 03:33 PM
I've had a lot of trouble with the db-01 which all turned out to be faults in building or adjusting it.
Still it's such a pig getting to the diffs that I just wanted something easier to work on and got the 511 and it's brilliant. It's just so easy to drive.

Fredrik Emilsson
25-08-2010, 07:52 PM
I've had a 501 And a Durango and now a lazer

And this thread is about 501X?;)

5POINTSTAR
27-08-2010, 09:41 PM
What is a DEX410?? Never seen one at my local track run (and never will)... But I hear they are simply AWESOME (and the chassis looks the business).

Pete68, if parts support is not a problem, flip a coin and let the chips fall where they may. You have a win win decision ;)

Any decision yet?

t8rtot
02-09-2010, 04:48 AM
No ETA from Tamiya USA on stock...and Tower shows it as discontinued:

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXWXX8&P=7

RC Mart also replied to my recent inquiry that it was discontinued...

I got an email from Speedtech saying they're expecting new kits in 2months. Tamiya seems to just make batches at will and only if they are selling.. since they just won the euros i'd expect a larger stock this time. When tamiya runs out of stock they have a habit of reporting them as 'discontinued' but w/in a few months somebody will have a few new ones..

TonyV2382
04-09-2010, 03:42 AM
Just read on some thread here that Tammy is planning a shaft driven 4wd car...I wonder why lol. And yes the 511 line is done and discontinued.

The 501x arms are no where near as tough as the DEX arms. Feel both in your hands or try screwing a shock end screw and u will see. You can strip the Tam plastic at will...not with the DEX.

Secondly Like I said, the car was built perfectly and ran great INDOORS ONLY. Guys Im not bashing the car...its amazing I know it cuz Ive owned it...but in terms of maintenance, durability and dare I say performance?? The dex is the cream of the crop. Theres no doubting it...drive one then you will see. It is the future of RC. Theres no magic diff setting, no pulleys to worry about if a tooth is chipped, no belt tension settings to experiment with, no "trick" to remove the spur...which DOES destroy the center pulleys as well as the belts and other parts which include ur spur from twisting it and it rubbing on the pinion. You have to remove all your gear from one side to get to the lower motor mount screw just to adjust gear mesh. Cmon man...to deny this fact is just plain ignorant.

Fabs
04-09-2010, 06:40 AM
Now isn't this funny...

You're all arguing about a thread that's nearly one year old. I think the guy's made his mind up and had his new car by now, whichever it was...:thumbsup:

Fredrik Emilsson
04-09-2010, 06:45 AM
Again, some people talk about things they donīt know anything about...

Carno
04-09-2010, 08:13 AM
Just read on some thread here that Tammy is planning a shaft driven 4wd car...I wonder why lol. And yes the 511 line is done and discontinued.


Instead of wondering why. Wonder if it's true first :woot:
We already got that you didn't like your 501x but this thread isn't about the 501x.

t8rtot
04-09-2010, 05:56 PM
I want to hear from somebody on the inside that its discontinued. Everytime tamiya is out of stock they list it as 'discontinued' when I get facts there is a new car coming or if I get confirmatiom from tamiya that the 511 is done then we can speculate (which some of u guys are doin now) until then.. all this is hear-say.

TonyV2382
05-09-2010, 01:21 AM
Instead of wondering why. Wonder if it's true first :woot:
We already got that you didn't like your 501x but this thread isn't about the 501x.

Never said I didnt like it...if u ACTUALLY read...I said I loved it BUT...Read my friend.

Secondly you all can speculate about what Tamiya is doing, I mpretty darn sure and if Im wrong then Im wrong but it makes sense and is logical that they make their car more care free. If they are smart and want some success here in the states they will follow a shaft driven design and incorporate all the things that made the 501/511 great in the handling dept.

fastinfastout
05-09-2010, 01:55 AM
I want to hear from somebody on the inside that its discontinued. Everytime tamiya is out of stock they list it as 'discontinued' when I get facts there is a new car coming or if I get confirmatiom from tamiya that the 511 is done then we can speculate (which some of u guys are doin now) until then.. all this is hear-say.
does it really matter if the 511 is discontinued or not? Parts are plentiful and always will be. Most of the consumable parts are shared between 3 cars so you will never fall short of parts in the future.

Fabs
05-09-2010, 07:56 AM
Never said I didnt like it...if u ACTUALLY read...I said I loved it BUT...Read my friend.

Secondly you all can speculate about what Tamiya is doing, I mpretty darn sure and if Im wrong then Im wrong but it makes sense and is logical that they make their car more care free. If they are smart and want some success here in the states they will follow a shaft driven design and incorporate all the things that made the 501/511 great in the handling dept.

That's impossible to do, what makes the 511 handle so well is that it's a belt driven car...

DCM
05-09-2010, 08:51 AM
What car is better is subjective, and what makes one car better for one person, makes it worse for another.

As for parts quality, the only issue I have heard of in recent weeks, it ball studs on the Tamiya being a little (a lot) on the soft side, which isn't exactly difficult to rememedy now, it is?

As for toughness, I think I can say, from experience, the 501X suspension is as tough as they come, simple's, I run 4, yes four DB-01's, they have exact same drivetrain and suspension, and in 2 1/2 years, replaced two pulleys, two belts, one layshaft pulley, and the odd suspension component. The only thing that has taken a hammering, is inner hinge pins, I now use drill blanks, as they are easier to buy.

mof
05-09-2010, 08:58 AM
You have to remove all your gear from one side to get to the lower motor mount screw just to adjust gear mesh. Cmon man...to deny this fact is just plain ignorant.


Again, this thread is NOT about 501x but 511. You can adjust gear mesh on a 511 without removing all the stuff on the other side. And if you want, you can do that on 501x too, you just need to select an ESC that fits under the slipper shaft.

http://www.oople.com/rc/photos/review501x/electrics04.jpg

Carno
05-09-2010, 10:54 AM
Never said I didnt like it...if u ACTUALLY read...I said I loved it BUT...Read my friend.

Secondly you all can speculate about what Tamiya is doing, I mpretty darn sure and if Im wrong then Im wrong but it makes sense and is logical that they make their car more care free. If they are smart and want some success here in the states they will follow a shaft driven design and incorporate all the things that made the 501/511 great in the handling dept.

You said you loved how it handled, true. But then you rant on about how hard it is to fix it when this thread isn't even about the 501x.

The thing i understand least is how you can say that the 501 handles great and then promote shaft drive when its belt drive is one of the key things that makes it handle so nice.

If people manage to get the car sorted with a diff cover, wouldn't it be a lot more logical for Tamiya to incorporate one into their design instead of changing the whole transmission line to shaft drive.

Personally i wouldn't be as interested in a new Tamiya 4WD if it was shaft driven.

But all this speculation is indeed pointless. We'll just have to wait and see.

fastinfastout
05-09-2010, 12:41 PM
haha

let this thread die now for gods sake!

the thread starter has already bought a car, ended up getting a db01r according to his other posts in other threads

pete68
07-09-2010, 12:53 PM
yep got a db01r and loving it !!!

TonyV2382
07-09-2010, 10:26 PM
You said you loved how it handled, true. But then you rant on about how hard it is to fix it when this thread isn't even about the 501x.

The thing i understand least is how you can say that the 501 handles great and then promote shaft drive when its belt drive is one of the key things that makes it handle so nice.

If people manage to get the car sorted with a diff cover, wouldn't it be a lot more logical for Tamiya to incorporate one into their design instead of changing the whole transmission line to shaft drive.

Personally i wouldn't be as interested in a new Tamiya 4WD if it was shaft driven.

But all this speculation is indeed pointless. We'll just have to wait and see.

Indeed its not about the 501x but it is a discussion between a 511 and a dex...And having had experience with a 501 which is hardly much difference from the 511 with the exception of "ease of maintenance" and I believe chassis length lol. This is a discussion and is useful for any1 that may be contemplating the 2 cars. It is not strictly about one car but about 2 in comparison and being that I have experience with BOTH I will say what I feel. And yes it did handle great but IMO shaft drive is better and more reliable. I dont know what is so hard that you cant understand:eh?:

Either way, I know the starter of the thread bought a db01r but like I mentioned before a forum is for all to discuss a topic. And so here we are. I had the db01 as well. Great handling car. But again 6 screws per diff cover and if you just so happen to strip a screw in one of those holes god help you because youll have to dremel your diff cover AND possibly destroy your chassis to get that screw out, invest in a screw extractor or porperly grease those screws before putting them in :yawn: ...Shock towers that dont allow for full travel of the trf shocks:yawn: You need the atomic carbon shock towers with the 2nd upper row of holes for those to work or else your UJ will pop out in the rear. Uhh, crazy heavy :yawn: Stock motor mount is garbage. LoL...The amount of wrenching that "beginner" car required would scare away any beginner from this hobby. It did handle pretty well and at least the belts were properly covered. But again...by the time ur done really making the car work properly youll spend lots more when u can juts buy a DEX and be done with it :thumbsup:

TonyV2382
07-09-2010, 10:34 PM
http://www.oople.com/rc/photos/review501x/electrics04.jpg[/QUOTE]

Your guys are really gonna look at this lay out and tell me that you'd have no problem on an outdoor loose dirt track and have no issues? lol. OOOK. Its pretty though.

mof
08-09-2010, 04:40 AM
Your guys are really gonna look at this lay out and tell me that you'd have no problem on an outdoor loose dirt track and have no issues? lol. OOOK. Its pretty though.

As people have already said, diff covers are recommended for loose dirt track.

TonyV2382
08-09-2010, 06:26 PM
Whats this I hear...502x...a Tamiya SHAFT DRIVEN car. WoW. Confirmed.

Carno
09-09-2010, 12:15 PM
Whats this I hear...502x...a Tamiya SHAFT DRIVEN car. WoW. Confirmed.

Yep, fortunately you were right.
Saves me a lot of money not having to buy one. :thumbsup:

The question now is are you going to keep your Durango? :D

fastinfastout
09-09-2010, 01:37 PM
Whats this I hear...502x...a Tamiya SHAFT DRIVEN car. WoW. Confirmed.
give it up

stop posting in this thread

your statement has NOTHING to do with the title of this thread

as you can see from a few posts above, he has already bought a car

TonyV2382
11-09-2010, 12:49 AM
give it up

stop posting in this thread

your statement has NOTHING to do with the title of this thread

as you can see from a few posts above, he has already bought a car

Dude seriously stfu and stop responding ...the title is 511vs dex are u illiterate. And even if he already bought it there are people who are debating between the two cars and may require some insight on people who've owned both. Why dont u just stop posting and leave with ur tail between ur legs...Ur just pissed I was right :p bounce

TonyV2382
11-09-2010, 12:53 AM
Yep, fortunately you were right.
Saves me a lot of money not having to buy one. :thumbsup:

The question now is are you going to keep your Durango? :D

Ugh man U dont know how I feel about this situation lol. I like the gear diffs in the rango...But I love my tamiyas and always have. As I said the only reason I left tam. was because of the belt thing and also the ball diffs. But now theyre doing this big ball diff thing, god knows what that is...and shaft drive as well...:o So dream come true?...absolutely...Am I droppin my dex?...I dunno. The thing is too sweet to drive and I have it dialed to the point where I leave other 4wds in my wake. I may just buy it anyway who knows. We'll see come this winter how I feel. Gear diffs is less maintenance and fine tuning them is a piece of cake...just add oil lol. With ball diffs its a lil trickier but once set they are trouble free. Who knows Im happy and sad at the same time.

Pablo668
11-09-2010, 04:40 AM
Dude seriously stfu and stop responding ...the title is 511vs dex are u illiterate. And even if he already bought it there are people who are debating between the two cars and may require some insight on people who've owned both. Why dont u just stop posting and leave with ur tail between ur legs...Ur just pissed I was right :p bounce

Er....Dude, maybe you want to try and tone it down a little. I almost never see posters talk to eachother this way in here. It's not nice.

As far as the debate you are having, no one is 'right' per se'. It's just two different ways of doing things.

fastinfastout
11-09-2010, 05:36 AM
Whats this I hear...502x...a Tamiya SHAFT DRIVEN car. WoW. Confirmed.

Dude seriously stfu and stop responding ...the title is 511vs dex are u illiterate. And even if he already bought it there are people who are debating between the two cars and may require some insight on people who've owned both. Why dont u just stop posting and leave with ur tail between ur legs...Ur just pissed I was right :p bounce
god, your an idiot, you still dont get it do ya?

No, I am not illiterate, but it seems the only person is on here is you. The title of this thread is 511 vs dex410, the guy was asking about which car he should get about 1 year ago, he has already bought the car he choose, so why do you keep on replying on this thread.

further more, then you reply again with a dumb message about the 502! Mr illiterate again, cant you read this thread is about the 511 v's dex410, its got nothing to do with the 502, and then you make some comment about you being right. What exactly are you right about? Sorry, I should not ask anymore questions directed at you, as you will find a reason to respond AGAIN not relating to this thread.

GEE YOUR A MORON!!! get a life!

TonyV2382
13-09-2010, 02:34 AM
god, your an idiot, you still dont get it do ya?

No, I am not illiterate, but it seems the only person is on here is you. The title of this thread is 511 vs dex410, the guy was asking about which car he should get about 1 year ago, he has already bought the car he choose, so why do you keep on replying on this thread.

further more, then you reply again with a dumb message about the 502! Mr illiterate again, cant you read this thread is about the 511 v's dex410, its got nothing to do with the 502, and then you make some comment about you being right. What exactly are you right about? Sorry, I should not ask anymore questions directed at you, as you will find a reason to respond AGAIN not relating to this thread.

GEE YOUR A MORON!!! get a life!

Dude...if u are having trouble connecting dots u seriously have issues. If u cant follow a conversation then I dont know what to say. lol whatever...Lemme break it down to you one more time Barney style...and thats a kids show in case you needed that to be clarified as well... the title of this thread is 511 vs dex, the starter of this thread was debating what to get and has ended up with a durga...great. But for people that are still debating this very same question the argument/disdussion can still persist. You just want it ended because you either have nothing valid or useful to contribute or you just hate being proven wrong about the fact that the belt system sucked and has now been changed to a shaft system in the new 502, which is why that car was brought up. The debate in essence is between a belt driven car...the 511 and the DEX a shaft driven car. That is where the debate lies. For Tamiya to stop using the belts in its offroad car, it must mean something. And that my friend is more reliability, and more versatility.

So, If you're seriously still not understanding the argument or its references to the 502 and how it correlates to the rest of the cars discussed here then yes you are a seriously retarded individual. Just shut it.

TonyV2382
13-09-2010, 02:38 AM
Er....Dude, maybe you want to try and tone it down a little. I almost never see posters talk to eachother this way in here. It's not nice.

As far as the debate you are having, no one is 'right' per se'. It's just two different ways of doing things.

I agree its not nice. But unfortunately there are slow learners here.

It is 2 different ways of doing things. We are just discussing why some1 would choose one car over the other and which car would be better suited for a loose dirt style track vs an astro/carpet/indoor style track. They are both great cars. The rango has 1up in the maintenance and strength department however. That is my opinion.

fastinfastout
13-09-2010, 03:32 AM
STFU....MOVING ON...

Now to really answer your question...I owned both cars. I cant tell you this. Maintenance on the dex410 will save you time. You can change diff oils replace the diff and adjust the slipper in under 15 mins if you were determined to do so lol. With the tamiya cars it used to take me a real long time to get to the spur or the diffs. Also the ball diffs were a huge hassle. Are they too tight, are they too loose. It gets old. BUT...they both handle very well. I can honestly say, that the dex does everything well. On outdoors and indoors. so thats versatility. On outdoor tracks with the 501 I had to replace belts and rebuild diffs after every run. In the durability dept. the R version of the DEX has a weak point with the front plastic brace. Get the ally one and ur good. Arms never brake, hinge pins never bend, shocktowers never an issue. Only thing to worry about is the drive shaft pins. Read on durangos tips to build those right. 501/511...Arms do break and with that pins will always bend. rear wing mount is a joke and always gets loose. shock towers are surprisingly strong, never broke one. body looks amazing. it looks stunning in all aspects but is a bit fiddly when it comes to maintenance issues and arm/ hinge pin breakage. I remember I had to stock up on pins and arms all the time. as well as front shock shafts. Rear wheel wobble is also an annoying thing and the 12mm hex conversion made it handle worse in every way.

when properly set up and if driver skill is not an issue, then both are remarkable on the track. I really enjoyed my 501, even though you are discussing the 511, its not far off. The reason in the end that I sold my 501 was the maintenance issue. Too much going on. No matter how well you wire you motor leads or servo wires one day something will come loose and catastrophe will strike. I once had my servo mounts come undone and since they run parallel to the front belt, the belt got caught on it and snap! lost the race...DNF.

Not saying the shafts in the dex dont get in the way, but they will not cause such a huge problem. and as I said...removing the spur is literally seconds...removing the diffs...4 screws. You just cant get that with ANY other buggy.

Yes I know this is a late reply but I felt the need to add to it for any future inquiries.

The belts last a very long time (half a year if you race every weekend) if you adjust it properly. Mine is 1,5 years old and only on its 2nd rear belt. Front is the same.

Also, how the hell did you manage to have a servo mount come undone?!? The things are made in plastic and impossible to come undone once screwed in.

To me it sounds like operator error big time.

I run outdoors all the time, I haven't got any issues with the belts or constantly needing to rebuild the diffs on my 501. I am using the newer, more durable, drive belts that come with DB01R and 511.



I agree that the 511 arms brake easily, but to brake a 501 arm you really have to try, like drive full throttle at a concrete wall...

Pins might bend and arms might brake if you hit that concrete wall, though :)

As for 511, the arms brake more easily and thus the pins don't bend as easily as in 501.


Ever heard or seen or read what might happen to a DEX when a pin comes loose from the drive shaft...? Yes, it is what you could describe as a huge problem (flame out :thumbdown:). And yes, it does happen. For the newer models this problem should be sorted, though.

The Cat SX belts are not very strong (regardless of surface), I'll agree with you on that, but the belts on the 511 is a lot better.

We race on any surface, in any weather, and have not heard or seen what you report at all. Thats why I'm hard pressed to believe you.

Only parts i have broken on my 511 have been front arms and std front shock towers. I use the std arms - high traction. They have never failed to the point where i havent finished though - they usually crack. Would rather crack an arm than bend alloy parts. I agree, the std arms are weak. Tamiya even write on the package that they aren`t the strongest ! Something along the lines of " for professional use only, use part number **** for more durability "

As for the rest .......

Never had any issues with the wing mount coming loose, the belts or pullies wearing or breaking, the diffs being too tight or too loose nor needing to be rebuilt after every run as you describe. Your servo mount came loose cos you didnt do it up properly, you used an alloy screw, or it had been in and out so many times that the threads were worn on the mount.

Steel screws that self thread into plastic dont vibrate loose. Thats a fact. Don`t wish to piss on your fire or be rude but frankly it doesnt sound like you bolted certain parts of your 501 together right in the first place dude. Sorry !

This in particular ...




Is complete rubbish if its built correctly. Any car will drop to bits if the person bolting it together doesnt do it correctly.

The Durango is a great car though. you`re right ! - i`d have one if i wasnt happy with my Tamiya :)

I've ran my 501x for 2 years racing weekly on a wide variety of high grip and low grip surfaces.

So far total breakages on this car are:
Rear Wishbone, landed short on a huge triple running on a 1/8th track with a 4.5
Front Shock Tower, hit a wall flatout
Front Shock Shaft, landed nose first off a jump into a block

I've never had to replace any pulleys, the belts I replaced once as they where starting to look a little tatty. My diff's go months between rebuilds and never lose any smoothness, I just re-grease them every so often. I've never had to remove camber links or the shocks to get the diff's out either, there is plenty of room to manoeuvre them in and out with the shocks and camber link's left on.

I wouldn't say the DEX is a bad car, I would love one myself but I have to say the Tamiya doesn't need much maintenance to keep it going well.

Now isn't this funny...

You're all arguing about a thread that's nearly one year old. I think the guy's made his mind up and had his new car by now, whichever it was...:thumbsup:

Again, some people talk about things they donīt know anything about...

Instead of wondering why. Wonder if it's true first :woot:
We already got that you didn't like your 501x but this thread isn't about the 501x.

Again, this thread is NOT about 501x but 511. You can adjust gear mesh on a 511 without removing all the stuff on the other side. And if you want, you can do that on 501x too, you just need to select an ESC that fits under the slipper shaft.

http://www.oople.com/rc/photos/review501x/electrics04.jpg

Dude...if u are having trouble connecting dots u seriously have issues. If u cant follow a conversation then I dont know what to say. lol whatever...Lemme break it down to you one more time Barney style...and thats a kids show in case you needed that to be clarified as well... the title of this thread is 511 vs dex, the starter of this thread was debating what to get and has ended up with a durga...great. But for people that are still debating this very same question the argument/disdussion can still persist. You just want it ended because you either have nothing valid or useful to contribute or you just hate being proven wrong about the fact that the belt system sucked and has now been changed to a shaft system in the new 502, which is why that car was brought up. The debate in essence is between a belt driven car...the 511 and the DEX a shaft driven car. That is where the debate lies. For Tamiya to stop using the belts in its offroad car, it must mean something. And that my friend is more reliability, and more versatility.

So, If you're seriously still not understanding the argument or its references to the 502 and how it correlates to the rest of the cars discussed here then yes you are a seriously retarded individual. Just shut it.
Tony you are a complete tool!
Have a look at the people who have posted in response to your stupid posts, and you tell me who the one denominator stupid idiot is.....YOU!

First off, you bump a thread that is 1 YEAR OLD. And then you jump on here as a 'know it all' telling people what a crap time you had with your 501x, only to have been told it was 'user' error(YOU:D).

seankyew
13-09-2010, 05:40 AM
can the moderator please disable/lock/remove this thread? things have become very pointless and unpleasant:(

mof
13-09-2010, 09:16 AM
Well, as far as the open belt drive not being able to handle dirt...

Included is a pic of a 511 that had the body come partly off at quite a muddy race. I think there was starting to be a bit too mud much for it, though, there was around 400g of mud in the car after the heat :)

Here are the A finals (videos by AiR) so you can see the conditions for yourself (the 511 in the pic was in the B finals if I remember correctly, but the same conditions for them too)...

sWEW-SOGoJk

RbqUxc8MMRE

a-Ju-O6-8CA

mof
13-09-2010, 10:05 PM
Here's a lot better pic of the car taken by the owner:

http://img824.imageshack.us/img824/5740/tamiya.jpg

caiping
14-09-2010, 12:33 AM
I'm new to rc racing and have not driven a 1/10 buggy yet. The one thing that I know, is that the best way to determine the best is to simply see what the top guys are using at the latest and biggest races. This is the same with most other competition sport based heavily on equipment.

Where this is concern, the Euros 2010 which concluded just a few weeks ago, would be the race to look at. From what I see, the Tamiya factory drivers were using the 511 and not some prototype. As far as the results are concerned, it's 1st-511, 2nd-BMax, 3rd-511, 4th-Dex and 5th-B44.

Until the next big race with all the top drivers, the TRF511 still reigns as the best. This does not mean it suits everyone including me. It just means that it deserves the biggest consideration if one is looking for a top buggy.

mof
14-09-2010, 06:21 AM
The one thing that I know, is that the best way to determine the best is to simply see what the top guys are using at the latest and biggest races.

On the other hand, they drive what they are paid to drive... :woot:

Pablo668
14-09-2010, 07:10 AM
I agree its not nice. But unfortunately there are slow learners here.


Your opinions are valid, as valid as anyone elses, the bolded part is where the problem lies. You can disagree with someone without calling them stupid either directly or tacitly.
This is what you need to drop.

I think when it comes to purchasing a new ride it comes down to user preference and what they are prepared to deal with when it comes to maintenance. It doesn't always work out for some people but that's life.

I'm pretty sure I could go through this forum and find examples of people telling you that their particular car is the bestest car made ever in the history of everything. But really there's no right answer.






(actually there is, it's the original Kyosho Ultima, greatest car ever)

Migs
14-09-2010, 08:44 AM
As far as the results are concerned, it's 1st-511, 2nd-BMax, 3rd-511, 4th-Dex and 5th-B44.

Until the next big race with all the top drivers, the TRF511 still reigns as the best. This does not mean it suits everyone including me. It just means that it deserves the biggest consideration if one is looking for a top buggy.
yeah all i really take from big race results is that all 3 of those chassis are very competitie and each of them are capable of winning in the right hands, the nats in america had a bunch of losi xxx4s in the A main, thats a fairly un-loved chassis still on the pace with the right work done and driven by the right people

Rich D
14-09-2010, 12:56 PM
Here's a lot better pic of the car taken by the owner:

http://img824.imageshack.us/img824/5740/tamiya.jpg


This sends a shiver down my spine :cry: - im a clean freak :thumbsup:

GRIFF55
14-09-2010, 01:22 PM
how did that switch survive!! I have had both cars and whilst both are very good, i personally have found the 511 more forgiving to drive. Both have plusses and minuses...

sime46
14-09-2010, 05:46 PM
I know what you mean Rich. Mines getting dusty on the fridge in my kitchen and I cant rest. Lol

Rich D
14-09-2010, 05:52 PM
how did that switch survive!! I have had both cars and whilst both are very good, i personally have found the 511 more forgiving to drive. Both have plusses and minuses...

Christ knows - i cant even see what speedo it is. Was that race worth risking writing off all your electrics :confused: lol ?

I know what you mean Rich. Mines getting dusty on the fridge in my kitchen and I cant rest. Lol

:thumbsup: you sound worse than me Si :blush: :woot:

GRIFF55
14-09-2010, 06:24 PM
its got the new special brown ball cups too!!!

MikePimlott
14-09-2010, 06:46 PM
Thats mearly a bit of mud, that wont slow down a 511, the diffs and the blue spur :o are spotless.

Loving the paint scheme on the shell in the background :woot:

_valtsu_
15-09-2010, 07:31 AM
That muddy tamiya is mine. The electrics are still working. Wheight of the car was 2100g.

mikeyscott
22-11-2010, 10:03 PM
its got the new special brown ball cups too!!!

What are you running now?

Just got a 511, but also have the 410r and lazer fs

fastinfastout
24-07-2011, 01:02 PM
this is funny, check this out guys. I just happen to be going through the tamiya thread and found this thread again.

as you may well remember, TonyV bumped up a 1 year old thread with his problematic 501x, which has nothing to do with this thread by the way.

He then has the following quotes.

Noted: TonyV has now purchased a SX3(belt drive), gee he is the biggest hypocrite alive:p
if u go out on a US style track with dirt everywhere and debris...belts will be the death of the car and ur pulleys.

Outdoors with some dirt or indoors too for that matter...pulleys got chewed up, small rocks got inside the rear diff all the time.

The dex is the cream of the crop. Theres no doubting it...drive one then you will see. It is the future of RC. Theres no magic diff setting, no pulleys to worry about if a tooth is chipped, no belt tension settings to experiment with

IMO shaft drive is better and more reliable. I dont know what is so hard that you cant understand

As I said the only reason I left tam. was because of the belt thing and also the ball diffs.

bzb
24-07-2011, 03:13 PM
haha, a sx3, thats has the most pullies and belts out there!! :thumbsup:

for the rest the 511 is so easy to drive, i love it, because im just an HOBBY driver :thumbsup:

Dalton
24-07-2011, 05:42 PM
I got my 511 set up today and loved the way it feels/handles (broke in the final hit a spun out car at end of straight to come a close last) but compared to my B44.1 it felts alot more stable

LRP
24-07-2011, 08:24 PM
:thumbsup: