View Full Version : Mmmmmm Big Bore Shocks!
MHeadling
21-11-2009, 04:21 PM
Just seen Jimmys The Players pre report and see the new big bore shocks and springs!
They look superb! When are they out??
What performance gains will they give? I suppose being big bore you have a larger volume of oil so you can run lighter oils and get a different pack to the shock?
mikeyscott
21-11-2009, 05:02 PM
Tell us more!
bigred5765
21-11-2009, 05:54 PM
don't they just look the snizzle, will be down at the players tomorrow spectating for a while and if allowed will get some sneaky pics,
MHeadling
21-11-2009, 05:56 PM
See the pics in Jimmys report! New wishbones too!
http://www.oople.com/rc/photos/worksopplayersrematch/index.html
It's good the team keep developing the CAT rather than Xray who bring a new car out each year!
MattADH
21-11-2009, 06:33 PM
What performance gains will they give? I suppose being big bore you have a larger volume of oil so you can run lighter oils and get a different pack to the shock?
In theory, if all things are equal the shocks characteristics shouldnt change too much.
A large shock capacity will help with greater consistency and the oil not having to work as hard therefore lasting longer and requiring less maintenance.
But with new pistons shapes, number of drilled holes, as well as revised springs, I think that some fine tuning will be necessary to get the best from them.
Titch
22-11-2009, 07:42 PM
I'm more interested in the tuning springs tbh.. where can i get those from? I like how the weight is etched into the spring.. are any available for the standard shocks?
David Church
22-11-2009, 10:11 PM
I'm more interested in the tuning springs tbh.. where can i get those from? I like how the weight is etched into the spring.. are any available for the standard shocks?
None of the big bore shocks or springs are avaliable yet.
They are being tested and will be out when they are happy with them.
We all want a set, but only an elite few have had a go, the rest of us must be patient, haha.
And no springs like this have been made for the normal shocks as far as I know.
Titch
22-11-2009, 10:25 PM
/sits and waits.
discostu
22-11-2009, 10:47 PM
None of the big bore shocks or springs are avaliable yet.
They are being tested and will be out when they are happy with them.
We all want a set, but only an elite few have had a go, the rest of us must be patient, haha.
And no springs like this have been made for the normal shocks as far as I know.
apart from the ones you get with xray tc they have the rate stamped on them the taper is to clear the lower arm seems a bit of a bodge if you ask me.
stu
mikeyscott
22-11-2009, 10:56 PM
Run losi shocks....
MHeadling
22-11-2009, 11:06 PM
Stu runs a B-Max now, just ignore him!! :p
Only kidding mate!!!
Jonesy
22-11-2009, 11:10 PM
Run losi shocks....
Not an option for some I'm afraid.......
After seeing the shocks in action this weekend I am very impressed and looking forward to getting my hands on a set. Si and Grant's cars both looked planted, the cars could get over the rumble mat section alot better than most. It also appeared to help the landings from the big jump.
It's hard to tell of course by just looking but both drivers and mechanics were positive enough through their comments concerning the testing, there is still some more testing to do and I'm sure we'll be hearing more about them sooner rather than later
mikeyscott
22-11-2009, 11:15 PM
When they are released I'll get a set and try them out, until then Losi threaded shocks at our track.
discostu
23-11-2009, 05:38 PM
was si and grant running taperd pistons?
jimmy
23-11-2009, 05:51 PM
No, the tapered pistons are the next thing they'll try - if they work then I'm sure they'll be included.
Both the drivers seemed to love the new dampers and said it made a real difference.
discostu
23-11-2009, 06:00 PM
would be intresting to compare losi springs on them for me the losi springs felt more consitant
Chris Doughty
23-11-2009, 06:28 PM
I like playing the shock game...
knowing almost nothing about the size of them etc...
a stab in the dark here
6 hole pistons in the front equiv hole size to a Losi black piston, 40wt oil, black springs :P
8 hole pistons in the rear equiv hole size to a Losi black piston, or maybe 6 hole red/orange equiv, 30wt oil, black springs :P
dialled... maybe, I reckon I will be spot on with the springs at least
either way, big bore is the future!
mikeyscott
23-11-2009, 06:58 PM
would be intresting to compare losi springs on them for me the losi springs felt more consitant
Exactly what a friend of mine says. Losi springs are the best that I have come across.
Tyson
24-11-2009, 01:03 PM
3 months before we can get our hands on these Big-bore shocks after an email from Schumacher:cry:
bigred5765
24-11-2009, 02:25 PM
apart from the ones you get with xray tc they have the rate stamped on them the taper is to clear the lower arm seems a bit of a bodge if you ask me.
stu
the shock never pass the wishbone, dont think it does on any car,the spring taper is so that the std spring retainer can be used im guessing,a large flat sring retainer might catch the wishbone,
Lee Martin
24-11-2009, 02:47 PM
i wanna know what size they are.....................
internal diameter?????????????????
bigred5765
24-11-2009, 02:53 PM
they looked to be bigger than the yokomo big bores so im guessing 14mm
Lee Martin
24-11-2009, 03:03 PM
what are yok ones????????
im doubting 14mm... 8th big bores are 16mm!
bigred5765
24-11-2009, 03:15 PM
yoko ones are 13 or 13.5mm
Nick Goodall
24-11-2009, 03:16 PM
I like playing the shock game...
knowing almost nothing about the size of them etc...
a stab in the dark here
6 hole pistons in the front equiv hole size to a Losi black piston, 40wt oil, black springs :P
8 hole pistons in the rear equiv hole size to a Losi black piston, or maybe 6 hole red/orange equiv, 30wt oil, black springs :P
dialled... maybe, I reckon I will be spot on with the springs at least
either way, big bore is the future!
Sounds amazing Chris - like your style :thumbsup:
discostu
24-11-2009, 03:23 PM
the shock never pass the wishbone, dont think it does on any car,the spring taper is so that the std spring retainer can be used im guessing,a large flat sring retainer might catch the wishbone,
http://www.oople.com/rc/photos/worksopplayersrematch/newschustuff/wishbones.jpg
New front suspension arms are much improved.
http://www.oople.com/rc/photos/worksopplayersrematch/sponsorfocus.png
Schumacher Racing have some interesting new development parts on their 4WD cars - sadly the new 2WD was swiftly taken away after some secret testing at the nearby RHR race track facility and won't be run this weekend. We were told by a little birdie that it's as unique as the CAT SX was when it was released.
The big bore dampers are the 'biggest thing' on the cars - and only the top team drivers had the chance to run them this weekend, with only three sets in existence it was a bit of an exclusive club. The dampers are large - possibly not as monstrously humongous as the Yokomo big bores, but maybe that's not a bad thing.
All the springs for the new dampers are black - but helpfully have the weights etched into the top shoulder. The springs are tapered toward the bottom to clear the suspension arms.
The team also have some new suspension arms to test out - and our man Graham 'blitzboy' Smith was one of the few drivers with them, and is sure to give them a thorough strength testing! ;)
http://www.oople.com/rc/photos/worksopplayersrematch/newschustuff/bigbores.jpghttp://www.oople.com/rc/photos/worksopplayersrematch/newschustuff/springs02.jpg
highlited in bold!!!! my yokomo shocks dont hit the lower arm and neither do the yokomo big bore as they use the same springs and retainers like i said it seems a bit of a bodge.
jimmy
24-11-2009, 03:37 PM
Hows it a bodge? I simply don't understand your point?
Since when did the Yokomo big bores use the same spring and retainer? Do you actually have any or are you trying to prove a flawed point?
Matt-h
24-11-2009, 03:43 PM
i dont get the bodge either.
Surely it would be cheaper to put longer ball studs on the wishbones and shock tower to get the clearance, rather than design a tapered spring?
discostu
24-11-2009, 03:48 PM
because the springs dont fit the car without being taperd as soon as you change spring diameters it changes the spring tension why cant they simply mould a stand off on the lower arm and use bigger spring retainer and have a true linier spring dony get me wrong im not slatting what they have done just a mere obviouse thought.
jimmy
24-11-2009, 03:51 PM
Don't get 'bodge' from the perspective that there's no 'bodge' to get? Or are you of a similar mind set? :lol:
Longer screws - ? The closer the shocks are to the wishbones / tower the better. Otherwise - you use the shocks as a bumper, you bend screws, you smash wishbone mounting holes. Using longer screws is a bodge if there ever was one - designing a tapered spring is a smart move, the opposite of a 'bodge' if you ask me. :confused:
jimmy
24-11-2009, 03:55 PM
because the springs dont fit the car without being taperd as soon as you change spring diameters it changes the spring tension why cant they simply mould a stand off on the lower arm and use bigger spring retainer and have a true linier spring dony get me wrong im not slatting what they have done just a mere obviouse thought.
No idea what your point is tbh - these are new shocks and new springs. They DO fit the car as you can see? I'm not sure what the problem is. I'm sure they could have made them so they didn't fit and then had to also redesign the entire suspension and drivetrain - but that seems a little silly.:lol:
discostu
24-11-2009, 03:59 PM
Hows it a bodge? I simply don't understand your point?
Since when did the Yokomo big bores use the same spring and retainer? Do you actually have any or are you trying to prove a flawed point?
i stand corrected yokomo big bores springs are diferent
ok let me re fraise this what is the point of putting a taper on the springs and changing the liner profile the spring for the sake of a larger spring retainer and a small amount of plastic moulding on the lower arm no longer screw.
discostu
24-11-2009, 04:02 PM
there is no problem jimmy just an obsivation they do fit they say they work and work well and will probably inprove the car which is always good.
jimmy
24-11-2009, 04:03 PM
Ok, turn it around - why do all that instead of tapering the spring?
Seems like a clever idea to me and I can see absolutely no down sides at all!
discostu
24-11-2009, 04:08 PM
Ok, turn it around - why do all that instead of tapering the spring?
Seems like a clever idea to me and I can see absolutely no down sides at all!
except the liner quality of the spring under compresion.
which means when the spring is compressed it compreses at the same tension until the coils become closed which is a major part of how a spring works dont you think
bigred5765
24-11-2009, 04:16 PM
theres more than just liner type spring,theres rising rate and progressive which all have uses and may be the taper is there for more than just your wild guess at missing the wishbone,
discostu
24-11-2009, 04:20 PM
theres more than just liner type spring,theres rising rate and progressive which all have uses and may be the taper is there for more than just your wild guess at missing the wishbone,
yes you are correct but it was not a wild guess about missing the wishbones it clearly says it on the write up obove the pictures so from the information given a linier spring would be the more likly.
Lee Martin
24-11-2009, 04:24 PM
i think its clever..........................
Well done schumacher. Not bodged at all.
Northy
24-11-2009, 04:38 PM
yes you are correct but it was not a wild guess about missing the wishbones it clearly says it on the write up obove the pictures so from the information given a linier spring would be the more likly.
Yeh, but that's just what Jimmy wrote, and he's not the designer so who know's. In fact he's a bit mad really, and could easily have written - "The spring tapers so that it has more clearance to jelly when racing on that surface." Would that be true also :confused: :lol::lol::lol::lol::lol::lol::lol:
G
Chris Doughty
24-11-2009, 04:39 PM
what are yok ones????????
im doubting 14mm... 8th big bores are 16mm!
I roll with 17's on my 8th scale :thumbsup:
Chris Doughty
24-11-2009, 04:41 PM
either way, these must be a good thing, its generated enough interest/talking points...
did the players event go ahead? im not sure, its all about the big bores right now :woot:
(on a side note, im pleased we are actually talking about RC cars again!)
discostu
24-11-2009, 04:43 PM
Yeh, but that's just what Jimmy wrote, and he's not the designer so who know's. In fact he's a bit mad really, and could easily have written - "The spring tapers so that it has more clearance to jelly when racing on that surface." Would that be true also :confused: :lol::lol::lol::lol::lol::lol::lol:
G
:thumbsup::thumbsup::thumbsup::thumbsup::thumbsup: :lol::lol::lol::lol::lol::lol::lol:
Cruise
24-11-2009, 04:54 PM
Has anybody thought of the fact that the taper might be needed on a different car?
Cruise
Chris Doughty
24-11-2009, 05:12 PM
who's to say its not for aero efficiency?
Its nice to see 'new' stuff, or stuff that crosses from 8th to 10th, TC to 10th or 10th to anything else
10 years on, how much quicker around the track will cars be?
Mossy
24-11-2009, 07:07 PM
The tapered bottoms have been done to allow the spring to sit better and tighter onto the shock bottom. Not a bodge job at all, and was done deliberately to allow the big bore's to be used with the current shock bottoms. As for the shocks themselves, they performed fantastic at the Players on both mine and Grants car. I actually only went down 1 spring rate from when i ran at RHR.
Si
Lee Martin
24-11-2009, 07:09 PM
I roll with 17's on my 8th scale :thumbsup:
your car needs it:lol:
Titch
24-11-2009, 07:25 PM
Springs don't compress evenly throughout their length.. the ones at the top and bottom will begin to touch before the ones in the middle.. however, if the ones at the bottom fit inside each other rather than sitting on top of each other this could maintain a more constant compression load throughout the suspension travel.
Or it could just be to look fancy. :lol:
You could be cynical and state that, by tapering the spring, it means that Schumacher then do not have to make specific ball cups and spring retainers for that one car, but can use generic parts.....
or
By coning in the bottom of the spring, it allows for a slightly longer spring, which shouldn't get coil bound, but by tapering the bottom, allow for extreme angles of the shocks too.
Definately an interesting concept (one of the better ones, from Schumacher) and if it allows the car to drive better, then who cares!
MattW
24-11-2009, 07:58 PM
Some of this guess work is quite amusing, well, keeping me amused anyway! Loving the guesswork.
They are quite a lot bigger than the std ones, and when i tested them, there was quite a big difference in feel.
mark christopher
24-11-2009, 10:02 PM
maybe the shocks are not just fatter, they maybe allow more compression/extension.... to me a spring that shape would be progressive and not linier!
panch
24-11-2009, 10:07 PM
I think they are really the standard cat shocks and the spring taper is there to give you an optical illusion of big bores so that you all go and buy a new set to try them....genius :thumbsup:
fastinfastout
30-11-2009, 03:58 PM
I wonder if schumacher are going to release a new kit, with the big bores included.
like what yokomo have done with their 'team' kit
mikeyscott
30-12-2009, 04:33 PM
How is the R&D coming along with these and much to change?
I wonder if schumacher are going to release a new kit, with the big bores included.
like what yokomo have done with their 'team' kit
Considering the last few option parts (LiPo chassis and top deck, different rear shock mount position), it would really make sense! :thumbsup:
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.