PDA

View Full Version : Lazer Zx-r restoration


Ema
06-01-2010, 10:22 PM
Finally got some time to start the restoration of my Kyosho Lazer Zx-r, one of my favourite RC car for sure :thumbsup: .

I bought this used Zx-r in march 2009 from a nice guy here on oOple; to be sincerely I spent some time in order to convince him to ship in Italy, but at the end I finally got my Lazer and we were both happy, so thanks again Peter (MMRCCSOWL here on oOple) .

Finding all spares in order to restore an original Zx-r was really a challange, but .... you will see the result ;) !!

Hope you enjoy the build.

Bye
Ema

Ema
06-01-2010, 10:33 PM
Here’s some picture before the start.
This buggy is (was) really in great shape, with no wear on the transmission parts and with some really nice upgrades ( wasp racing carbon chassis, alu suspension holder and rw racing spure gear ).

http://img412.imageshack.us/img412/1488/44284189.jpg

http://img163.imageshack.us/img163/9030/95090590.jpg

http://img682.imageshack.us/img682/156/19416275.jpg

Ema
06-01-2010, 10:37 PM
Disassembly

http://img682.imageshack.us/img682/1420/threeassembly.jpg

Ema
06-01-2010, 10:40 PM
The diffs were a little gritty, so I decided to rebuild them ;) !

http://img138.imageshack.us/img138/9092/diff.jpg

Ema
06-01-2010, 10:41 PM
Time for some fresh bits :thumbsup: :thumbsup: :thumbsup: !!!

http://img412.imageshack.us/img412/9311/chassisspares.jpg

Ema
06-01-2010, 10:44 PM
The rear transmission assembly is done :D !!!!

http://img163.imageshack.us/img163/9305/spurassembly1.jpg

http://img684.imageshack.us/img684/4087/spurassembly2.jpg

Welshy40
06-01-2010, 10:46 PM
Nice. Well as you know bits can be bought as they have been molded. Still nice.

Ema
06-01-2010, 10:46 PM
Added a new chassis and a new top deck ...

http://img689.imageshack.us/img689/8734/chassisass1.jpg

http://img412.imageshack.us/img412/3470/chassisass2.jpg

http://img684.imageshack.us/img684/4889/chassisass3.jpg

Ema
06-01-2010, 10:48 PM
That'all for now .... but stay tuned ;) ;) !!

Bye
Ema

kek23k
06-01-2010, 10:50 PM
Wow, is that the Teamline front shock mount? Haven't seen one of those since back in the day. It was my fav mount for the front. How come you have ditched the carbon chassis? Kind of understand if you are going for a 100% stock shelf queen, but I think the carbon chassis you have is a later model and has slightly better weight distribution. No doubt Welshy will be able to confirm/deny this:thumbsup::thumbsup::thumbsup:

Ema
06-01-2010, 10:57 PM
Nice. Well as you know bits can be bought as they have been molded. Still nice.

You are right, but in this thread I'm only a collector :D !!
Here my target is to rebuild a 100% original Lazer that will never hit the track, but don't worry, a pure racer will follow shortly (or at least I hope so :D).

Ema
06-01-2010, 11:11 PM
Wow, is that the Teamline front shock mount? Haven't seen one of those since back in the day. It was my fav mount for the front. How come you have ditched the carbon chassis? Kind of understand if you are going for a 100% stock shelf queen, but I think the carbon chassis you have is a later model and has slightly better weight distribution. No doubt Welshy will be able to confirm/deny this:thumbsup::thumbsup::thumbsup:

Not really sure about the front shock mount brand, but I can post a better picture if you want ;) .

Ok, I will try to be more clear .... this will be a 100% stock shelf queen (to be honest not really 100%, as I have to wait a Zx-r body repro from Kamtec ...).

You are right, the wasp racing chassis is an MK2 layout, not really sure about the weight distribution with lipos, but probably slightly better with NiCd ( ... NiMh are too newer in this thread :D !!).

kyosho_kid
07-01-2010, 07:02 PM
Pretty sure 2 of those 3 lazer parts came from me ;-)

kek23k
07-01-2010, 07:10 PM
I think my love for carbon fiber would over-rule any desire for a shelf queen but I understand. I'm pretty sure that's a Teamline or PAP(Pete's Awesome Products) front shock mount, you should keep it safe as it's one of the only designs not available at Fibrelyte.

Keep us updated with your rebuild and I'd love to see your runner too.:thumbsup:

Ema
08-01-2010, 01:04 PM
Pretty sure 2 of those 3 lazer parts came from me ;-)

Probably true ... if you shipped something in Italy :thumbsup: !!!

Ema
08-01-2010, 01:12 PM
I think my love for carbon fiber would over-rule any desire for a shelf queen but I understand. I'm pretty sure that's a Teamline or PAP(Pete's Awesome Products) front shock mount, you should keep it safe as it's one of the only designs not available at Fibrelyte.

Keep us updated with your rebuild and I'd love to see your runner too.:thumbsup:

I also love carbon parts .... the runner will have a lot of them :thumbsup: !!!
But you have to wait a little as I need to get some minor parts (hex screws, new shocks, associated ballstud, RPM rod ends, ect. )

However in the meantime you can watch some updates here ;) !!

Bye
Ema

Ema
08-01-2010, 01:26 PM
Here's a view of the front end ..... ops, exploded front end :D !!

All parts were carefully cleaned, the little rust on the front universal was removed easily with a WD40 shower :D !
Yes, there's also a set of NIP whisbone and upper rod ends... and yes again, also the front shock tower is new !

As all of you know the gold kyosho shocks were great, but the anodization came off very easily.
However these front shocks were really in great condition (I can really say mint ...) and they still not leak a drop of oil since 1993 :thumbsup: !


http://img80.imageshack.us/img80/5507/exploedefront.jpg

Welshy40
08-01-2010, 01:45 PM
I think my love for carbon fiber would over-rule any desire for a shelf queen but I understand. I'm pretty sure that's a Teamline or PAP(Pete's Awesome Products) front shock mount, you should keep it safe as it's one of the only designs not available at Fibrelyte.

Keep us updated with your rebuild and I'd love to see your runner too.:thumbsup:


Id like to see a close up of the front shock tower as well, as it all depends on the camber link holes. As soon as I see it I can tell if its a PAP, or teamline (which Im not sure it is) wasp or my design.

Ema
09-01-2010, 11:05 PM
Here's a better picture of the carbon front shock tower ;) !

http://img63.imageshack.us/img63/4982/fronttower.jpg

kek23k
10-01-2010, 12:38 AM
That's definitely the last shock mount I ever purchased for my zxr, I'm pretty sure it's Teamline but i know for definite that Welshy will be able to tell us. You guys have got me checking ebay for a zxr to do up now lol.

Ema
10-01-2010, 10:55 PM
You guys have got me checking ebay for a zxr to do up now lol.

:thumbsup: :thumbsup: :thumbsup:
Ha ha, so it's time to join our club !!! Good !!!
If you can't find anything on ebay, let me know ..... I will check from a couple of friends here in Italy ;) !!

Ema
10-01-2010, 10:57 PM
I think it's time for some updates :D !!!

The front block reassembled

http://img85.imageshack.us/img85/5208/frontblockassy.jpg

Ema
10-01-2010, 11:08 PM
The chassis with the front end assembled; the Lazer is taking its shape :thumbsup: !!!

http://img22.imageshack.us/img22/806/chasswfront1.jpg

http://img19.imageshack.us/img19/7604/chasswfront2.jpg

http://img85.imageshack.us/img85/1948/chasswfront3z.jpg

Welshy40
11-01-2010, 10:26 PM
That's definitely the last shock mount I ever purchased for my zxr, I'm pretty sure it's Teamline but i know for definite that Welshy will be able to tell us. You guys have got me checking ebay for a zxr to do up now lol.

Yup must be a teamline as pap never made this. I made something similar but with a different ball joint allignment.

kek23k
11-01-2010, 10:28 PM
Coming on nicely with the build, must resist urge to buy a zxr!

Welshy40
11-01-2010, 10:30 PM
Well this lazer restoration sure brings back memories when building my zx back in early 89. Great design, great kit and built to last. This looks fantastic and hope the shell and paint job do it some justice.

kek23k
11-01-2010, 11:55 PM
Same here Welshy, bringing back heaps of nostalgia getting the zx for Christmas. Comparing it to the mid while doing the build, hehe. Funtimes :D

moth898
12-01-2010, 01:26 AM
I just received a lazer zx-r shell from team bluegroove and have to say its very good. It's made from macrolon, a lexan produced by Bayer. I know this because I use it in my company too, I manufacture aluminium railigs and use the same material for "glass" railings. I also purchased a zx5 shell from kamtec and from what I hear they are good too, can't wait to receive it

Welshy40
12-01-2010, 08:12 AM
I just received a lazer zx-r shell from team bluegroove and have to say its very good. It's made from macrolon, a lexan produced by Bayer. I know this because I use it in my company too, I manufacture aluminium railigs and use the same material for "glass" railings. I also purchased a zx5 shell from kamtec and from what I hear they are good too, can't wait to receive it

I think you mean ZX-S not ZX-5 as they are two different shells. The ZX-S is the one I gave to Kamtec to make a mold so everyone could at least use a shell with this car.

You will have to make a slight change on your servo positioning so buy a set of Associated B2 or B3 servo mounts (should still be available), maybe even B4 may work as this will help push your servo further inwards towards the belt so the shell wont hit the servo back, that is unless you have an S9551 Futaba and then you neednt worry about doing any of that.:thumbsup:

Welshy40
12-01-2010, 08:13 AM
Is anyone on this thread attending the Petit event this weekend?

isobarik
12-01-2010, 11:18 AM
I just received a lazer zx-r shell from team bluegroove and have to say its very good. It's made from macrolon, a lexan produced by Bayer. I know this because I use it in my company too, I manufacture aluminium railigs and use the same material for "glass" railings. I also purchased a zx5 shell from kamtec and from what I hear they are good too, can't wait to receive it

i think i can provide an under shell for the zxr bo0dy ...a pristine one ...

mvh isobarik

Welsh nope sorry shall not attend the petit event.

moth898
12-01-2010, 01:24 PM
i think i can provide an under shell for the zxr bo0dy ...a pristine one ...

mvh isobarik

Welsh nope sorry shall not attend the petit event.
any time your ready to give me a price pm me

Ema
12-01-2010, 03:22 PM
Well this lazer restoration sure brings back memories when building my zx back in early 89. Great design, great kit and built to last. This looks fantastic and hope the shell and paint job do it some justice.

The paint job will be the one shown on the zx-r box ;).
This car must be really like the ones shown at the expositions .... maybe I can lend it to Kyosho if they decide to make a re-edition :woot: !!!

However I have to (and so you also have to) wait the body and the undertray from Kamtec ....

The decals instead are already ready :thumbsup:.

P.S. I'm glad you (and all other guys here) enjoy this build.

Ema
12-01-2010, 03:31 PM
I just received a lazer zx-r shell from team bluegroove and have to say its very good. It's made from macrolon, a lexan produced by Bayer. I know this because I use it in my company too, I manufacture aluminium railigs and use the same material for "glass" railings. I also purchased a zx5 shell from kamtec and from what I hear they are good too, can't wait to receive it

Good to know, so please show us some quality pictures of your bluegroove Zx-r shell ;) .

Ema
12-01-2010, 03:33 PM
Is anyone on this thread attending the Petit event this weekend?

Unfortunately I will not attend.

Ema
12-01-2010, 03:51 PM
Here's some updates ;) !!

An exploded view of the carefully cleaned rear end :D .
But hey !!!! Wait a minute .... where are the dogbones ???

http://img442.imageshack.us/img442/8391/explodedrear.jpg



Don't worry, they are well stored into their original packet :thumbsup: !!
It's really weird that they also show the little rust found on the front universal, however nothing can withstand a WD-40 bath !!!


http://img109.imageshack.us/img109/602/reardogbone.jpg

moth898
12-01-2010, 04:35 PM
Hi Ema,
I'm going to post 3 picuteres. One of the Bluegroove body, my car pre disassembly and that chassis I told you about that is what I think to be a law-3. What I can tell you about the Bluegoove body is that it doesn't include the wing sides like the original zx-r.

isobarik
12-01-2010, 05:22 PM
Nope not law because its an chassi for the MKII

Nice MKII car there ....

mvh Isobarik

Ema
12-01-2010, 10:17 PM
Hi Ema,
I'm going to post 3 picuteres. One of the Bluegroove body, my car pre disassembly and that chassis I told you about that is what I think to be a law-3. What I can tell you about the Bluegoove body is that it doesn't include the wing sides like the original zx-r.

The body seems nice, I'm sure it will be ok for a shelf queen and I really have to say that your car look nice and clean also before disassembly ;).

I also quote Isobarick, I think that both chassis are made of FRP, not the same kind but however a sort of FRP.

You (and all other guys) can see the law-3 is here:
http://www.kyosho.de/?page=shop%2Fproduct&category_id=&mod_title=product&search=law-3

http://www.kyosho.de/show_preview.php?pic=eb80d911b60cfbda4de5c21932355 853.jpg&title=LAW-3

Ema
12-01-2010, 10:21 PM
The build is still going ....

The rear shock tower with the wing support installed ;).

http://img20.imageshack.us/img20/6854/reartower.jpg

Ema
12-01-2010, 10:22 PM
The chassis with the front and the rear ends assembled :D ...

http://img251.imageshack.us/img251/9104/rearassy1.jpg

http://img251.imageshack.us/img251/1649/rearassy2.jpg

http://img37.imageshack.us/img37/9521/rearassy3.jpg

Welshy40
12-01-2010, 10:32 PM
You must make sure that the chassis is for either a mk1 or mk2 chassis as if you sell it without that then someone will be unhappy if its wrong.

Mk1 has a bigger motor space and smaller top deck where a mk2 has a smaller motor area and longer top deck. Mk1 is the better of both as its a better all rounder compared to the mark2

kek23k
12-01-2010, 10:43 PM
Damn that looks good! Who's got a zxr they can sell me cheap?:thumbsup:

moth898
12-01-2010, 10:43 PM
The body seems nice, I'm sure it will be ok for a shelf queen and I really have to say that your car look nice and clean also before disassembly ;).

I also quote Isobarick, I think that both chassis are made of FRP, not the same kind but however a sort of FRP.

You (and all other guys) can see the law-3 is here:
http://www.kyosho.de/?page=shop%2Fproduct&category_id=&mod_title=product&search=law-3

http://www.kyosho.de/show_preview.php?pic=eb80d911b60cfbda4de5c21932355 853.jpg&title=LAW-3
It might be FRP like you say, but what it is for sure, is twice as stiff. I don't think I will use it in the rebuild, I'm going with what looks estetically the same as the original mk ll chassis.

kek23k
13-01-2010, 12:25 AM
It looks a bit like the graphite chassis that Losi used to use on the old jrx, kind of frp/graphite sandwich. This is why it will be much stiffer and also the finish is different.

Welshy40
13-01-2010, 07:23 AM
FRP or GRP with a coloured coating. Same material as the schumacher procat.

Ema
14-01-2010, 03:15 PM
Another update ;) !!!

The rear shocks are definitely not as in good condition as the front ones, the gold anodization is gone where the shock body hit the spring.

http://img251.imageshack.us/img251/5008/rearshocks.jpg


However tonight I will try to fix also this problem :thumbsup: !!!

http://img94.imageshack.us/img94/4408/rearshockswfix.jpg

moth898
14-01-2010, 09:44 PM
I had the same problem, the springs always curve when compressed. Put piece of clear tape around the shock body for protection because it will happen again.

Ema
18-01-2010, 12:49 PM
I had the same problem, the springs always curve when compressed. Put piece of clear tape around the shock body for protection because it will happen again.

Thanks for the advice, I will consider using the tape on my runner ;).
And about this car ... no one will be allowed to compress any shock :D !

Ema
18-01-2010, 12:58 PM
Some new electronics in order to look a little the transmission and the steering :).

Yes, the servo is new, but is a standard one. Not really good for racing, but perfect for the shelf :woot: !!
The motor (new) is not really as old as the car, but its gold color match pretty well the shocks :thumbsup:.

http://img251.imageshack.us/img251/2820/nonkyosho.jpg

Ema
18-01-2010, 01:02 PM
The car is not complete at all, however .... :wub

http://img121.imageshack.us/img121/6161/assy1.jpg


http://img199.imageshack.us/img199/7844/assy2.jpg

http://img121.imageshack.us/img121/7256/assy3.jpg

http://img33.imageshack.us/img33/3635/assy4.jpg

kek23k
23-01-2010, 11:57 AM
Get some nice yellow 2.2" wheels on there and you are done :D

Welshy40
23-01-2010, 12:16 PM
Dont forget battery straps as well.

Ema
25-01-2010, 12:39 PM
Guys you are right ... It's time to bump this thread a little :thumbsup: !!!

@kek23k
Here's what you asked for ;) !!!
It's really weird that kyosho still has these parts in stock :woot:, yes, the new wheels are a little more fluorescent than the older ones, however they are ok.

http://img64.imageshack.us/img64/4336/tireswheels.jpg

@Welshy
I became crazy to find the battery post ...
The problem is that the Zx-r MkI had one of the worst battery post ever (snap type), so everyone will switch back to the standar Zx ones (clip type).
Probably in the nintes there were a lot of battery post in each bin near each track, but finding them now it is really an impossible task.
However at the end I was really lucky to find them from a guy in France :thumbsup: !!

http://img718.imageshack.us/img718/6204/batterypost.jpg

Welshy40
25-01-2010, 12:45 PM
Yes i remember trying the snap ones and ended up throwing them in the bin as they were rubbish. I stuck with the zx ones as they were simpler to use and took a hammering.

kek23k
25-01-2010, 05:48 PM
I switched to using the cat type after a brief stint with velcro. I remember the zxr ones being pants though, still gotta keep it authentic :D

Nice wheels:thumbsup::thumbsup::thumbsup:

moth898
28-01-2010, 11:31 PM
Do you have any more pics with wheels and body?

Ema
29-01-2010, 09:43 AM
Do you have any more pics with wheels and body?

Not really, unfortunately I have to wait the body repro from Kamtec :(.

However I will show you the last two missing items :thumbsup:.
I kow you will probably be a little jealous of my LA-35 .... however you got a super rare and expensive new OT-93 by flirting with Isobarik and that is defnitely a good thing ( I'm talking of the bumper :woot: :woot: !!).



http://img193.imageshack.us/img193/9292/gearcoverv.jpg

http://img12.imageshack.us/img12/4458/bumpermu.jpg

moth898
29-01-2010, 01:05 PM
Where did you find that gear cover:drool:

moth898
29-01-2010, 01:23 PM
Not really, unfortunately I have to wait the body repro from Kamtec :(.

However I will show you the last two missing items :thumbsup:.
I kow you will probably be a little jealous of my LA-35 .... however you got a super rare and expensive new OT-93 by flirting with Isobarik and that is defnitely a good thing ( I'm talking of the bumper :woot: :woot: !!).



http://img193.imageshack.us/img193/9292/gearcoverv.jpg

http://img12.imageshack.us/img12/4458/bumpermu.jpg
I haven't recieved anything from isobarik yet, maybe I didn't go far enough:blush: but ther will be no more of that....my wife wasn't too amused.

I got a body from team bluegrove and even though it was well made I'm hoping kamtec makes it with thicker lexan, blue groove's is a little on the thin side.

I'm done with my rebuild too, the only things I still need are the bumper front wheels and :drool:gear cover:drool:. I changed two things fron the original that,in my opinion, mke a real difference. I changed the turnbuckles out for lunsford punishers, and I installed one other super rare item that I haven't seen anyone have. I might just show it with some new white rims I ordered.

Later,
Bill

chrispattinson
29-01-2010, 01:35 PM
Ive still got my Lazer ZXR mkII from way back, I got it new for xmas in 199?. What was the UK £RRP£ of this car back then, or of any of the old Lazers?

Ema
01-02-2010, 09:57 AM
Where did you find that gear cover:drool:

I found it in a Hobby Shop near my house :thumbsup:, he got only two Lazer parts available .... but fortunately one was this gear cover ;) !

Ema
01-02-2010, 10:00 AM
I haven't recieved anything from isobarik yet, maybe I didn't go far enough:blush: but ther will be no more of that....my wife wasn't too amused.

I got a body from team bluegrove and even though it was well made I'm hoping kamtec makes it with thicker lexan, blue groove's is a little on the thin side.

I'm done with my rebuild too, the only things I still need are the bumper front wheels and :drool:gear cover:drool:. I changed two things fron the original that,in my opinion, mke a real difference. I changed the turnbuckles out for lunsford punishers, and I installed one other super rare item that I haven't seen anyone have. I might just show it with some new white rims I ordered.

Later,
Bill

I'm looking forward to see some photos ;) !!


I changed the turnbuckles out for lunsford punishers, and I installed one other super rare item that I haven't seen anyone have.


Mmmmmm a super rare item that can be "installed", I got some suspects :rolleyes: ...

Bye
Ema

Ema
01-02-2010, 10:04 AM
Ive still got my Lazer ZXR mkII from way back, I got it new for xmas in 199?. What was the UK £RRP£ of this car back then, or of any of the old Lazers?

Difficult to say.
I think that in Italy the retail price, back in the days, was around 500.000-600.000 italian "lire", but I have no really idea of the conversion rate between lira to pounds at that days.

moth898
01-02-2010, 12:57 PM
I'm looking forward to see some photos ;) !!



Mmmmmm a super rare item that can be "installed", I got some suspects :rolleyes: ...

Bye
Ema
There is no way you'll figure this out, I've been looking for one for a few months, no one has it. It's not a original lazer part nor is it made for the lazer. I won't tell you what it is :p but what I will say is that it only a ashtetic item and it looks gooood.

Bill

HKP
11-02-2010, 10:45 PM
Difficult to say.
I think that in Italy the retail price, back in the days, was around 500.000-600.000 italian "lire", but I have no really idea of the conversion rate between lira to pounds at that days.

about 2000 lire to the pound :)

Ema
18-02-2010, 10:04 AM
about 2000 lire to the pound :)

Really a lot of money in that days ..