View Full Version : M03L
emtee
14-01-2010, 03:36 PM
Hi all... does anyone have any thoughts on shock oil and piston holes for running on carpet please? I'm thinking of running 40wt and 3 holes... is this a bit soft for carpet?
knighthawk
16-01-2010, 09:50 PM
Hello mate,
I run mine at the Carpet Thrasnals,
I run the Tamiya TRF M-Chassis shocks with 2 hole pistons front and rear,
50wt AE oil in the front
40wt AE oil in the rear
(not blowing my own trumpet but I'm currently 1st overall and have TQ'd 3 out of 4 meetings, the finals are a double header affair and I've won 5 A finals and 2nd in the other 3. Take from that what you want)
Hope this helps
Dez
emtee
19-01-2010, 11:40 PM
many thanks dude... hey, and good work on the results too...! I use the mini CVA's but I think I will take your advice on board and go with 2 holes and 40/50wt as you suggested... I have been running 2 holes with 50wt f/r... BTW what spring rates are you using if you don't mind sharing?
knighthawk
20-01-2010, 09:58 AM
No Problem Sharing,
Shock,
Tamiya Short Medium/Yellow on the Front
Tamiya Short Hard/Blue on the Rear
Tyres,
Tamiya S Grips with Hard inserts on the Front
Tamiya M Grips with Hard inserts on the Rear
Hope this helps and any more help just ask!
emtee
20-01-2010, 08:33 PM
:cool:
Do you run just one layer of tyre insert or do you pack 'em in..? I run the kit tyres & medium Tami inserts in just one layer as I feel it allows the sidewall to flex a bit and assists with the dreaded grip-roll... (along with the compulsory super-glue of course!)
knighthawk
21-01-2010, 07:12 PM
I only run one layer of hard inserts on both the fronts and rears!
I tried the two layer method and to be honest noticed no difference ( expect the expense of course )
The only thing we do to combat the grip role is to turn down the steering rate, I use a Futaba 3VCS radio and typically run around 75% travel
Another method of reducing grip role is to super glue the outside edge of the sidewall of the front tyres, have tried this but once it's done theres no going back!
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.