PDA

View Full Version : ZX-5 rtr


Matisse
24-01-2010, 03:56 PM
wanting to get a 4wd that i can happily thrash around yet use as aa race car as well ad i'm looking at the Lazer rtr.

one quick q - is the rtr basicaly the original zx-5 in terms of suspension and geometry?

Dyna
24-01-2010, 04:45 PM
One quick answer - yes :D

jaank
24-01-2010, 05:38 PM
The geometry is the same but the quality of plastic is just awful.

budgio
24-01-2010, 06:10 PM
They only bad parts on the RTR are the naff plastic driveshaft bits,they dont last long at all.

Matisse
24-01-2010, 06:51 PM
sweet, thanks for the answers guys.

mat

Manix
24-01-2010, 07:49 PM
I take it the plastic naff bits can be easily replaced? They do Ally and carbon bits I suppose?

Am looking at a 4wd buggy myself.

Dyna
24-01-2010, 08:04 PM
If i remember rightly, the chassis & topdeck are exactly the same item and cast with the same material as the standard ZX5.

Its the rest of the parts are slightly different plastic - supposed to be slightly more flexible but seemed to break easier than a standard part. I wouldnt worry to much though, as long as you have spares for the shock tower mounts, castor blocks, front gearbox casing & front sus arm mounts you should be fine.

The plastic outdrives are fine with mild motors, but getting metal diffs will able you to run wilder motors with no worries. Not too expensive either.

budgio
24-01-2010, 08:14 PM
I take it the plastic naff bits can be easily replaced? They do Ally and carbon bits I suppose?

Am looking at a 4wd buggy myself.



i,d recommend :
1 x front alloy brace
2 x Steel diff halves LA201 (for front & back)
1 x Universal front driveshafts - 68mm
1 x Rear wheel axles LA233
1 x Dogbone rear driveshafts LA234

c0sie
24-01-2010, 09:04 PM
Mat,

I bought a RTR ZX5 for Ursh to use at Caldi. It was an ok car, she loved it, but spares were a bitch to find and it needed upgrades to ensure it didnt break every run.

The plastic diff outdrives are shit, and the lower hinge pin retainers need swapping for alloy.

Manix
24-01-2010, 09:43 PM
So if I were to by the RTR version....Could Someone please supply me with a complete list of recomended optional parts >>>>

c0sie
24-01-2010, 10:51 PM
So if I were to by the RTR version....Someone supply me with a complete list of recomended optional parts >>>>

You might find that "please" will get you a few more replies :)

Manix
24-01-2010, 11:50 PM
You might find that "please" will get you a few more replies :)

Excuse me where are my manners (Edited) :D

JCJC
25-01-2010, 08:06 AM
You may be better off buying a good secondhand car Manix, the ZX-5 (reviewed in the review section) is getting a bit tired and old, needs a few upgrades to be compertive and spares can be elusive and confusing.

Why not look at a yokomo kit ? or a secondhand B44 - both common, loads of spares trackside, setup help etc.

Matisse
25-01-2010, 08:33 AM
Mat,

I bought a RTR ZX5 for Ursh to use at Caldi. It was an ok car, she loved it, but spares were a bitch to find and it needed upgrades to ensure it didnt break every run.

The plastic diff outdrives are shit, and the lower hinge pin retainers need swapping for alloy.

cheers cris, ws thinking along that line myself re the quality of the parts.

actually just bought an orig zx5 kit for cheaper than an rtr, which saved some money, which is nice.;)

Matisse
25-01-2010, 08:34 AM
You may be better off buying a good secondhand car Manix, the ZX-5 (reviewed in the review section) is getting a bit tired and old, needs a few upgrades to be compertive and spares can be elusive and confusing.

Why not look at a yokomo kit ? or a secondhand B44 - both common, loads of spares trackside, setup help etc.

i can answer that one, first off stick packs, secondly, i have no need to be competitive, i'm not good enough yet.

RogerM
25-01-2010, 12:16 PM
Matisse, which version of the ZX5 do you have? If you want to know anything about the ZX5 range then feel free to ask ... I've become a walking catalogue for Kyosho electric stuff over the last couple of years.

The Kyosho cars can be VERY competative ... Look at Rich Cree @ Petit Rc last weekend ... box stock car, finished building the RB5 in the morning and a solid a finalist ... just to prove it was not a one off he did exactly the same thing with the ZX5-FS the next day!!!

Where you planning on racing? I work close to Bristol and always looking for places to race :)

Matisse
25-01-2010, 12:37 PM
cheers, just got an orig zx-5 on the way to me.

tbh, i'll prob give swindon or chippenham a blast in the summer, other than that it'll be down the park for me!

RogerM
25-01-2010, 01:19 PM
Swindon track is good ... let me know how you get on with the car, always happy to help