PDA

View Full Version : Donate your knowledge and save a LiPo


Benh
25-01-2010, 09:51 PM
My poor LiPo now has a bad internal connection and with the sealed casing making it impossible to fix, without destroying it.

I have used a couple of different 'Corally' style, (Bullet), connectors in the car.(Spiral and straight spring) But wish to know which people think are the best.

Cost is not a consideration (Unless they cost more than a pack of Competition LiPos:o)

Battle_axe
25-01-2010, 09:59 PM
My poor LiPo now has a bad internal connection and with the sealed casing making it impossible to fix, without destroying it.

I have used a couple of different 'Corally' style, (Bullet), connectors in the car.(Spiral and straight spring) But wish to know which people think are the best.

Cost is not a consideration (Unless they cost more than a pack of Competition LiPos:o)
i have always used the fastrax coralay conectors on my esc and muchmore banana plugs on the charger side of things

DCM
25-01-2010, 10:11 PM
If you are carefull, with a blade, you can open the seam, around the cell, once in, there is normally a small board on the connector end, if the problem isn't the connector, leave it well alone....

Oh, and use tyre glue to re-join the case up.

Benh
28-01-2010, 03:05 PM
i have always used the fastrax coralay conectors on my esc and muchmore banana plugs on the charger side of things

I'll have a look at them;) Cheers

If you are carefull, with a blade, you can open the seam, around the cell, once in, there is normally a small board on the connector end, if the problem isn't the connector, leave it well alone....

Oh, and use tyre glue to re-join the case up.

Thanks for the tip.

Although, I am looking to replace these anyway with some 40C's. Borrowed a pack of LRP's and I did notice the difference. Was thinking TP Darks, but not sure at the mo.

Thanks again