PDA

View Full Version : Problems with glitching

Jamie B4
26-01-2010, 11:55 AM
As mentioned above have a problem with glithching and just wondering if anyone has had any problems. Only thing that I have changed recently in a Novak motor from a light to a R. Is there anything else to check? When it goes its usually after a jump and it loses power from the motor but not the servo then after a second or so just carries on as normal.

Any help guys?
RogerM
26-01-2010, 12:27 PM
I had something similar before Xmas @ PDA and it turned out to be the signal wire on teh speedo to reciever lead, fitted a new lead and no problems now (touch wood)
Battle_axe
26-01-2010, 12:54 PM
I had something similar before Xmas @ PDA and it turned out to be the signal wire on teh speedo to reciever lead, fitted a new lead and no problems now (touch wood)
running a RB5 right? that was a bit weird when i was marshaling it just seemed to stop then shoot off
RogerM
26-01-2010, 02:00 PM
That was it ...

As I say turned out to be an internal break in the signal wire ... the shooting off bit was me leaving the throttle on and willing it to move again!!! :D
Battle_axe
26-01-2010, 02:26 PM
That was it ...

As I say turned out to be an internal break in the signal wire ... the shooting off bit was me leaving the throttle on and willing it to move again!!! :D

ha ha well im glad you got it sorted