Spares, Upgrades & Support

[carlin]

Hi Guys,

I've been hunting around fancy giving one of these cars ago.

I've got one of the BMax Factory Kits with Big Bores coming :thumbsup:

But what spares are best to get & any options parts are required or needed.
Also been reading on other forums people are replacing the diff bearing for ceramic. Which Ceramics are people using (Manf)
Is it the Titanium screw kit the one people are using when building the kit.
What other manf wheels fit these cars or do you have to run Yokomo ones?

Also what UK shop supports the Yokomo for spare parts too?

Thanks

[AndrewCaunt]

We have fitted 5mm shock towers on Ashleys to give it a bit more strenth
Front wish bones are not as strong as the Durango ones you might need some of them mate:thumbsup: Where did you buy your factory kit from

[MikePimlott]

Front wishbones break quite easily so get some of them. I carry usual stuff like shock towers, spare spur gear, crown and diff gears.

With the FT front hexes losi and B44 wheels fit.

DMS, MK racing and Microtech for bits.

I have standard screws and standard diff balls all good. Only screws i have replaced are the ones through the shock towers holding the top of the shock, kit ones bent too easily.

Good car :thumbsup:

[carlin]

Hi Andrew,

Did send you PM yesterday think sent it to Ashley email though.

I got it from Japan, well its back instock next week

5mm shock towers? what make are those.
Who supporting you for spares this year?

How is Ashley getting on with the car compared to the Durango

[mikeyscott]

What made you change?

[carlin]

Just want a change it was either BMax or the ZX5 FS

Decided to try the BMax seems to look & drives like nice car.

[AndrewCaunt]

Hi Rob it seems a lot smoother to drive it has made even Ashley look smooth He has broken 2 wishbones apart from that well pleased with car
carnt wait for out doors.:thumbsup:Darren has some spares at DMS. and je spares stock some.PBM at Worksop has some spares :thumbsup:

[andys]

Good car choice.

Super smooth and very, very easy to drive. Only problem i've had is turn in, but should be sorted with new setup.

[carlin]

Thanks for the info guys.

Just one more question what lipos are you all running?

Seen the Intellect new lipos didbnt know if they would fit.

Also are you adding any weight to the rear of the car at all.
What are you adding & where abouts on the car

Thanks

[MikePimlott]

Im running IP4200 so they are not the new ones and fit perfectly.

I currently have no weight in the car but i am wanting to try brass battery straps from a B44 or similar.

A few people run lead to get the car up to NiMh weight makes the back end a little more "settled"

[CODMAN]

Just to be clear, the FT kit doesn't come with these. They need to be ordered separately. Also, the kit screws are Philips heads. That's the only reason I added on the Ti screw kit (2mm hex heads).

Great choice in a kit! I absolutely loved the build! Made me realise what low quality AE and Losi kist are...:cry:


With the FT front hexes losi and B44 wheels fit.


Good car :thumbsup:

[AndrewCaunt]

Hi Rob we run Vampire batterys seem very good From DMS thanks Andrew
:thumbsup:Yokomo Bmax towers direct replacement for orignal plastic towers made from 5mm high grade carbon fibre.

these will be sold by xtream rc and will be avalible from 1st Jan 2010

Front £15.50
Rear £19

any questions please pm me.

to buy contact xtream rc on 01304 374742 or 07743515775
email [email protected] ([email protected]) or call 07873462459 These are very good and strong rob

[chokoboy]

:thumbsup:Yokomo Bmax towers direct replacement for orignal plastic towers made from 5mm high grade carbon fibre.

these will be sold by xtream rc and will be avalible from 1st Jan 2010

Front £15.50
Rear £19

any questions please pm me.

to buy contact xtream rc on 01304 374742 or 07743515775
email [email protected] ([email protected]) or call 07873462459 These are very good and strong rob

Sounds good but please show us some pics of the towers!

Sorry found pics in another thread!

[discostu]

hey

here is the link if you havent already seen them.

http://www.oople.com/forums/showthread.php?t=36065

stu rand