View Full Version : cheap good esc for 19t
niallgc
15-06-2007, 06:51 PM
im looking for a cheap good esc for a 19 turn trinity motor, im using a tamiya teu-501k at the mo and it keeps over heating after 5 mins, as in hot enough to gve me a bad blister!
any suggestions?
Doomanic
15-06-2007, 07:11 PM
First thing to do is get rid of the standard Tamiya plugs and bullet connectors as they are high reistance and will be contributing to the overheating.
Use Deans for the battery and the motor, or solder the motor direct.
If that fails, you do need a new esc.
My son uses a Novak XRS in 2WD (and 4WD when he had one) with no problems.
losidan
15-06-2007, 07:13 PM
These are ok:
http://www.modelsport.co.uk/?CallFunction=ShowSpecification&ItemID=18265
nice and small and external solder tabs too...not too shabby.
i have same prob atm due to running something like a 10t in a 14 t lrp pro reverse ESC. im moving to a 19t soon so im gonna keep mine but i would suggest one if you got around £60, but that aint cheap. soo erm hang ill have a look for you.
http://cgi.ebay.co.uk/Mtroniks-Viper-RV11-esc_W0QQitemZ290128208250QQihZ019QQcategoryZ34063Q QrdZ1QQcmdZViewItem
http://cgi.ebay.co.uk/Mtroniks-Sonik-4-Sprint-ESC-Speed-Controller_W0QQitemZ220120964838QQihZ012QQcategory Z34063QQrdZ1QQcmdZViewItem
http://cgi.ebay.co.uk/V16-Digital-Speed-Controller-ESC-10-Turns-Tamiya-Kyosho_W0QQitemZ330134581174QQihZ014QQcategoryZ256 5QQrdZ1QQcmdZViewItem
niallgc
15-06-2007, 09:24 PM
thanks for all the help, losidan, it says its a 14t limit?
ashleyb4
15-06-2007, 10:03 PM
Motor limits on esc's mean the limit and up not the limit and down. so on a esc with a 14t limit means you can run a motor from a 14t and up so this would include motors such as 19t and 27t etc but not a motor such as a 10t.
I would highly recomend the xrs ive had novak speedo's before and there top notch.
http://dcracing.co.uk/dcrshop/product_info.php?cPath=56_67&products_id=478
Also in my personal opinion i would avoid mtroniks as ive had 4-5 bloe up on my cant remeber precisly they seemed to be going up left rigt and center.
Hope ive helped.
A
niallgc
15-06-2007, 10:44 PM
does it come with all the soldering/wireing already done?
matdodd
15-06-2007, 10:54 PM
How much do you want to spend? ive got a few speedos for sale on here.
ashleyb4
16-06-2007, 09:33 AM
Yup it should do you will have to solder it onto your motor though.
A
timie1
03-07-2007, 10:39 PM
Hi guys, I am reading your thread and I have a suggestion. If you want a esc to power that 19t trinity motor, may I suggest these ones........http://www.horizonhobby.com/Search/Default.aspx?SearchTerm=tazer&CatId=
There is a club around here, (Canada) that uses the cheaper one, the 15t esc in their onroad cars and they swear by it. For $29US you can't go wrong.
bert digler
04-07-2007, 06:18 PM
How much do you want to spend? ive got a few speedos for sale on here.
buy one of these, doddy gear's top notch and it probably has a warranty card
the novaks warranty is as much use as a chocolate fire guard:D
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.