PDA

View Full Version : Servo Saver


Adam31
03-03-2010, 01:04 PM
Hi,

Does anyone use a servo saver on a cat sx? or does everyone just run with a servo arm?

Adam

bigred5765
03-03-2010, 01:07 PM
just the arm for us and a good servo

jameswilkinson7
03-03-2010, 01:12 PM
I'm on just the arm too... Tried a couple of savers but there is'nt much room.

Adam31
03-03-2010, 01:31 PM
Cheers guys, Thats what i thought couldn't see how to get one in.

Will order a good one now.

Adam

mikeyscott
03-03-2010, 03:06 PM
just the arm for us and a good servo

Ditto.

Sanwa and now a Savox 1258

Have recently purchased, but not fitted a Core RC servo horn. Thought it would be prudent to retain the flex from the plastic servo horn

B&H Racing
03-03-2010, 05:51 PM
I`m using the Core RC servo horn, No probs for me and looks proper good :D

Adam31
03-03-2010, 09:20 PM
Glad to hear you use the core rc arm i have just ordered one. Did wonder what the next weakest part will be but guess i will find out next time i hit something hard.

Adam

Snappy
04-03-2010, 10:12 AM
I'm running a Kimbrough servo saver on mine with one of the low profile S9551 futaba servo's. Very happy with the setup and no stripped servo gears.

http://www.kimbroughracingproducts.com/servo-savers.html

Gibbon666
06-03-2010, 09:33 PM
I'm running a Kimbrough servo saver on mine with one of the low profile S9551 futaba servo's. Very happy with the setup and no stripped servo gears.

http://www.kimbroughracingproducts.com/servo-savers.html

Me too. KP201 servo saver and a small cut out of the undertray side. Lots of guys seemed to be stripping the plastic servo horns and it seemed like a good solution.

Snappy
07-03-2010, 10:13 AM
Me too. KP201 servo saver and a small cut out of the undertray side. Lots of guys seemed to be stripping the plastic servo horns and it seemed like a good solution.

I agree - we have a couple a tracks over here with some big jumps. Some people were stripping gears on servo's so I fitted the servo saver. I'm running the the 201 version.

The small Futaba servo allows me to use around 3mm spacer to mount the servo instead of the large one that spaces the servo far out. This allows me to run the steering linkage on the outside of the servo saver.