PDA

View Full Version : Lipo help


Rob_B
04-03-2010, 09:07 PM
Looking at buying a new lipo for my cat, have been looking at getting one of these http://www.jespares.com/electric-models?page=shop.product_details&flypage=flypage.tpl&product_id=8715&category_id=1168
anyone using one of these or no if it will fit in the car?
Or can anyone recomend a decent lipo.
Running std catsx carbon chassis cheers

moth898
04-03-2010, 09:15 PM
I went through the same trouble. Is your chassis lipo friendly with the industie standard battery lugs. If it doesn't have the square cut outs for the battery you'll have some trouble finding one. I found the trackpower 40c 5000 fit very well, with only a small modification to the top deck to pass the battery wire.

Rob_B
04-03-2010, 09:20 PM
When you say the trackpower 40c 5000mah do you mean the dark series?
If so im after one that is brca legal, sorry should have mentioned that.
i have the lipo lugs that you glue to the underside of the lipo. Is that what you mean? cheers

spud31
04-03-2010, 09:22 PM
Reedy 4900
Gm 5000

These all fit fine an dandy

Rob_B
04-03-2010, 09:26 PM
cheers spud dnt suppose you can post a link as were to buy. cheers

corkyjohnson75
04-03-2010, 09:48 PM
cheers spud dnt suppose you can post a link as were to buy. cheers

Hi guys my son races the phil booth cat ive glued the locators on our nosram 5300 lipos they fit great no movement but the lipo cases have cracks all over them really bad they look un safe and for a 100 bucks a pack this is not good al 4 packs are the same and they are only 6 months old they get used once a week not sure what the problem is any idears