How much torque does the steering servo need to have on a touring car?

[ghost2212]

Hi

How much torque do i need as i was thinking of purchasing one of these
http://www.hobbyking.com/hobbycity/store/uh_viewItem.asp?idProduct=9980&Product_Name=Turnigy_BLS980_Digital_Brushless_Heli _Rudder_Servo_3.1kg/.03sec/58g_

thanks

Brett

[Battle_axe]

Hi

How much torque do i need as i was thinking of purchasing one of these
http://www.hobbyking.com/hobbycity/store/uh_viewItem.asp?idProduct=9980&Product_Name=Turnigy_BLS980_Digital_Brushless_Heli _Rudder_Servo_3.1kg/.03sec/58g_

thanks

Brett
i would be carefull i ran a heli rudder servo in my buggy with 0.03ms transit times and you will find it is way to fast also the gyro will output a different signal and some transmitters wont work with this

[Mike Haswell]

Around .08 on speed with 6 to 8 kg of torque will be about right. Bluebird's 661MG fits the bill for an inexpensive servo. Savox are also proving popular and their low profile 1251 would also do.

[Welshy40]

I use a Futaba 9551 and seems fine.