View Full Version : getting to the motor mount screw
mark christopher
18-06-2007, 10:00 AM
anyone found a good tool or method/mod to get to the lower screw for motor adjustment?
jimmy
18-06-2007, 10:05 AM
a modified 2.5mm allen key, shortened, would be good. Don't have one though. We installed a brushless which doesn't need moving often, which is good since it took us a while to install! We removed the undertray and battery post and used a ball ended driver.
I use a Bondis ball driver quite a long one (awaits Cree coment)
I remove the batterie stay and the top of the shock from tower this gives me resonable access
Phill T
jimmy
18-06-2007, 10:17 AM
yeah my ball driver is a losi item with short tip (!!) and chubby handle, so not ideal for the job.
PaulRotheram
18-06-2007, 10:36 AM
hudy ball end driver.. i bought one in the winter and it's spot on for use in my bj4, so it should be pretty useful in the d4 also?
the Hudy tool has a long tip, thin handle and fits perfect so you dont have to take the shock off, nor battery post to gain access.
I think it cost about £9.. well worth the money as its made my life with the bj4 a whole lot easier!
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.