View Full Version : cat sx rear end sliding about
rc10fan
14-03-2010, 01:48 PM
Hi guys can anyone shed some light on why my cat has a tendency to slide about when racing. the set-up is standard out of the box red springs on the back with 30w oil. it always slides out when cornering this happens indoors and outdoors. any help would be great thanks.
chatts#725
14-03-2010, 02:31 PM
Not saying im right but when this happened with mine the front diff had come loose meaning it was more like 2wd than 4, good way to check is just to stop the front of your car with your foot on a surface where it can break traction and apply the throttle, all 4 wheels should spin, if not there could be a problem.:thumbsup:
jameswilkinson7
14-03-2010, 05:39 PM
Hi guys can anyone shed some light on why my cat has a tendency to slide about when racing. the set-up is standard out of the box red springs on the back with 30w oil. it always slides out when cornering this happens indoors and outdoors. any help would be great thanks.
Does it do this on or off power?
rc10fan
14-03-2010, 05:41 PM
hi mate thanks for the reply the diff is fine tried that all wheels are turning but I'm running a one way diff in it as this is supposed to stop the front end being dragged out of corners. so I'm not sure what it could be.
rc10fan
14-03-2010, 05:45 PM
basicly when I am turning into a corner normally a sharp one it just slides out so i come of the power and then go again. but in answer to your question on power i would say
PaulUpton
14-03-2010, 05:46 PM
If your running a one way, make sure your throttle break on transmitter isn't to high, as off power this will be like using the break and cause car to spin. Worth a try
paul
ulrich
14-03-2010, 07:31 PM
It is a good thing to have the front diff tighter than rears.
On which track surface?? dirt, astro, grass??
hi mate thanks for the reply the diff is fine tried that all wheels are turning but I'm running a one way diff in it as this is supposed to stop the front end being dragged out of corners. so I'm not sure what it could be.
rc10fan
14-03-2010, 09:27 PM
it does it on all surfaces. I will change the settings on the handset see if that helps.
cheers
Mossy
15-03-2010, 08:23 AM
Post your setup and ill take a look.
Si
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.