PDA

View Full Version : I'm not super discouraged anymore!!!


moth898
21-03-2010, 10:59 PM
Just finished my race day with great results. let me break down the history of racing my cat.

Race 1-I broke everything, including the kitchen sink, on the Cat:(.Didn't finish the main. Got advice from lochness..clint...moss...church...jimmy and stegger. Spent loads of money at Shumacher.com.

Race 2-Broke alot less and finished the main last, but finished non the less...Spent loads more money at Shumacher.com.:eh?:

Race 3-Didn't break a single part and qualified 5th in the c main and finished 6th.:thumbsup:

I know some of you are saying big deal finish first and then you'll impress us, but thats not the point. I've never raced before and everyone here helped me get better.....THANK YOU!!!!! Now all I have to work on is to improve my driving skills.

The Cat is, as you Brits might say, spot on. Still not getting enough on throttle steering though, any ideas. I'm running the 12.5 yoke and thought of going down to the 7.5, will that help?

discostu
21-03-2010, 11:33 PM
if i were you i would stop spending money on parts you probably dont need and consentrate on adjusting and learning about setups with what you have got, there is no one thing that will make your car or any car excelent if there was we would all have it all i sugest you do is play and take notes, the asnswer to your question 7.5 deg hubs will give less on power stearing.

stu

moth898
21-03-2010, 11:43 PM
Some people eat when they are emotional, I buy parts:D.

So how do I get more on power steering?

lochness42
22-03-2010, 12:35 AM
weeeeeee..... moth is our hero, moth is our hero weeeeeeeeee.... :thumbsup:

moth898
22-03-2010, 04:01 AM
I'd like to thank the academy for this honour......:thumbsup:....no wait thats another dream. My goal is to be in the a-main by race 10 or maybe race at the robin hood raceway this june......that's if my wife lets me:(

David Church
22-03-2010, 05:45 AM
I am happy to hear you getting on better with the Cat!!!:thumbsup:
When you are happy with your car your driving will improve.
As far as more on power steering, I will let much more qualified people answer, but perhaps think about a bit more brakes into a corner and let the car square up a bit more before getting on the power?

moth898
22-03-2010, 11:52 AM
Your probably right, I was sliding into the loose stuff past the apex. To be honest I wasn't really pushing the cat as I was still trying to negotiate the jumps better. I've almost got them all figured out and then I'll work on improving my aproaches. The thing is this track doesn't let you practice on off race weeks, and from what I can figure, he lets his friends practice and all we get is 30 minutes before each race day. So all the people that have raced there for years know it alot better than any newcomer.

On a little different funny note, to give you a idea what its like to race on this track, 10 racers started the first qualifier and only four finished that didn't break!!

lochness42
22-03-2010, 12:06 PM
Well that's good to hear that you didn't belong to that majority :D

Northy
22-03-2010, 01:25 PM
My goal is to be in the a-main by race 10 or maybe race at the robin hood raceway this june......that's if my wife lets me:(

:thumbsup::thumbsup::thumbsup:

David Church
22-03-2010, 04:43 PM
Your probably right, I was sliding into the loose stuff past the apex. To be honest I wasn't really pushing the cat as I was still trying to negotiate the jumps better. I've almost got them all figured out and then I'll work on improving my aproaches. The thing is this track doesn't let you practice on off race weeks, and from what I can figure, he lets his friends practice and all we get is 30 minutes before each race day. So all the people that have raced there for years know it alot better than any newcomer.

On a little different funny note, to give you a idea what its like to race on this track, 10 racers started the first qualifier and only four finished that didn't break!!

Have you got any pics of the track?

moth898
22-03-2010, 09:09 PM
Have you got any pics of the track?
I don't have pictures, but I do have video of the track. Here's the link.

http://www.youtube.com/watch?v=moRuBYauvq0 (http://www.youtube.com/watch?v=moRuBYauvq0)

This track eats wishbones by the ton!!!!

PsycoChris
23-03-2010, 05:38 AM
LOL Great Job Buddy.:thumbsup::thumbsup: Im glad we changed your mind and got your head on the right pass on chosing an excellent buggy I hope you do better and have a great season.

I brought Mine to an 8th scale track out east on Long Island Ny. And People could not believe there eyes what I was doing. The lay out was cool and new. They just put it together and it was day one there. I had my indoor setup on and an 8.5t ballistic with lrp sxx tc. and I basically Cleared every quad or double, or triple they had. I was right with the 1/8th scale buggies. They could not believe what they were saying. So I think this buggy is amazing and I cant wait to I get the Big Bores because I then will be able to hit anything.

moth898
23-03-2010, 11:28 PM
Now I setting my sights on the cougar....but witch one to get. Moss said he uses the s1 chassis for his Cat because it more flexible and thus more forgiving in the handling department, does the same logic apply to the cougar?

clintscreations
24-03-2010, 05:36 AM
Glad I could try to help.........might try a little more anti squat ....should gain a little more rear steer

moth898
24-03-2010, 06:33 AM
I didn't think antisquat affects steering? That wasn't in the manual:confused::D

lochness42
24-03-2010, 10:32 AM
Well I'm going to get Pro-CF kit and maybe I'll get S1 top deck to have softer car option. That's my choice.

Antisquat affects handling during acceleration and braking, so it doesn't have constant effect.

moth898
24-03-2010, 11:16 PM
You haven't lead me wrong yet lochness so I bought the CF Pro last night also, then I got the bad news this morning:(........Their not released yet. Do any of the team drivers know about when to expect its release.

Is that a loaded question or what:D

Malek
25-03-2010, 02:42 AM
So you're not discouraged anymore..that a good thing..I told you the cat needs some patience and time.It will only get better from here.As for my Cat it's going through some serious testing before my big race in tillsonburg.

moth898
25-03-2010, 03:00 AM
Your just rubbing in Tillsonburg race, I won't make, because you just saw I bought the cougar....zilia...zilia:D

Malek
25-03-2010, 03:22 AM
Your just rubbing in Tillsonburg race, I won't make, because you just saw I bought the cougar....zilia...zilia:D

You can always come to the race it's never to late you know...As for the cougar sv...I have a little suprise for you.

moth898
25-03-2010, 03:58 AM
You can always come to the race it's never to late you know...As for the cougar sv...I have a little suprise for you.


Whaaaaaaat?

lochness42
25-03-2010, 09:55 AM
You haven't lead me wrong yet lochness so I bought the CF Pro last night also, then I got the bad news this morning:(........Their not released yet. Do any of the team drivers know about when to expect its release.
Yes that's right, Cougar isn't out yet. Current expected realease is early April.

moth898
28-03-2010, 01:31 PM
Due to the off week in racing because of easter, I gave the cat a good once over and noticed something. The steerind bell has alot of play due to the "ball cup brace". Is there any other option to replace that double ball cup brace or do I have to make one myself.

Cruise
28-03-2010, 01:42 PM
Replace the original grey ballcups with the black ones of Mi4 (U3500)
the have a lot less play.Check on dusty tracks for free movement.
you can also apply some light threadlock to the bearings of the steering,as the bearings can have some play in the steering arm.

Cruise

lochness42
28-03-2010, 01:58 PM
yes Mi4 ballcups are really improvement. everything is slop free

moth898
30-03-2010, 08:55 PM
Is ca the only option for glueing tires? Ca seems to become loose after a couple of runs. I remember that shoe goo was also used but in 1/8 scale, can shoe goo be used in 1/10 or is there a better alternative?

lochness42
30-03-2010, 10:49 PM
CA should be fine - are you using good thin glue?

moth898
31-03-2010, 01:09 AM
I'm using proline medium, only because I think the thin runs off too fast

David Church
31-03-2010, 05:12 AM
Are you cleaning the tyre before you put it on the wheel? Motor cleaner cleans alot of the release agent off which helps the glue stick to the tyre.

lochness42
31-03-2010, 05:47 AM
maybe also to sand wheels a bit to help with grip, but I don't do that

moth898
31-03-2010, 08:08 PM
I didn't think about the release agent being a problem, I'll give it a try. Got to get my act together if I'm going to show face at the race in june.:D

Mr. Red
31-03-2010, 08:57 PM
Moth, If my wife wouldt let me play with my toys, I would start playing with her girlfriends instead;).

Have just read all the replys in your threads and have learned a lot. Thank you for asking the things I wanted to also:thumbsup:.

Got a question of my own. Am in the process of building mine and I am waiting for all my purple parts to come back re-anodized red! Get it..Mr Red....yeah you get it.

Can a servosaver be used??? First car I have ever built without one:confused:

chatts#725
31-03-2010, 09:08 PM
Yep you can use one as i have one in mine, all depends on what servo you run etc, you may find that you have clearance problems with your saver and the body and undertray, you can either a- cut a hole in the body and tray ( i tried this first with mine but no good for outdoors) or b- shorten the servo mounting posts by 3-5 mm or until the servo sits right up to the lipo, this should give you enough clearance on your saver side, there is no real science to this just use a file you will know when it looks right:thumbsup::thumbsup:

Mr. Red
31-03-2010, 09:19 PM
Okey. thanks!

Have not reached that step yet cuz the parts will arrive tomorrow. Got a Futaba s9551 that is meant to sit in the Cougar and a BLS451 in the cat. Maybe it should be the other way around then? If it is easier to make it work?

moth898
31-03-2010, 10:00 PM
I'm glad my inexperience has helped you Mr. Red:D

I was told that a servo save can fit but you would have to install a low profile servo to keep the steering geometry as straight as posible. On the advice of others I'm using a core aluminium servo arm on the third hole (it has four) and don't have any promlems. The thing with standard servo horns is that they are to thick and hit the body. The servo arms needed for the cat is inverted towards the servo so even if you can stuff a servosaver and standard size servo it might affect the steering. Buy a strong servo with metal gears, add on the core servo arm and you'll be fine. Here's the link:http://www.racing-cars.com/pp/Manufacturer/Core_RC/CR110.html

It gives you something more to anodize red....Mr. Red:thumbsup:

P.S.Don't forget to get the Mi4 ball cups to reduce slop in the steering.

moth898
02-04-2010, 07:44 PM
Does anyone know if the big bore shocks will fit with the rear shock conversion, or are we going to need a conversion for the conversion:confused:

mikeyscott
02-04-2010, 08:11 PM
I would imagine fine as the sx2 rear wishbones have the mounting holes for both front or back.

I am back to shocks on the front and loving it. Big bores on the front for my track. As for other tracks, who knows

moth898
02-04-2010, 08:18 PM
I'm not worried about how they work, I'm worried that the extention on the rear shock stay won't be long enough. Actually I'm pretty sure they won't fit with what's there now.

bigred5765
02-04-2010, 08:22 PM
they fit front and back dont worry

moth898
12-04-2010, 01:43 AM
Great success at the races today....Qualified third and finished second!!! In only my forth race. The cat was purrrrring all day long. I'm running Clint's setup for bumpy tracks and let me tell you it was smooooooth. I still didn't have enough on throtle steering, thats until I changed to 3mm anti-squat up from 2mm. The cat just hooked up and took off, its incredible how such a small change can make that much of a difference.

The only problem I'm still having is with the rear drive shafts popping out every now and then, thats only when I crash and cartwheel mind you:thumbsup: but it still happens. Any ideas?

David Church
12-04-2010, 05:02 AM
Great success at the races today....Qualified third and finished second!!! In only my forth race. The cat was purrrrring all day long. I'm running Clint's setup for bumpy tracks and let me tell you it was smooooooth. I still didn't have enough on throtle steering, thats until I changed to 3mm anti-squat up from 2mm. The cat just hooked up and took off, its incredible how such a small change can make that much of a difference.

The only problem I'm still having is with the rear drive shafts popping out every now and then, thats only when I crash and cartwheel mind you:thumbsup: but it still happens. Any ideas?


I am glad your cat went well!!!
You need to lose a little bit of droop, this should stop the driveshafts from poping out.

moth898
19-04-2010, 02:09 AM
Do any of you use schumacher tires? Due to the fact that mostly everybody at the track uses a certain tire, that has been proven to work well, I have done the same. What I want to do is use Schumacher tires for the Cat and Cougar, but I don't know what works well. I figure the Blue mini pin works on medium to hard surfaces, but since I haven't even touched them I don't have a clue.

It would be nice if some of the team drivers could make a chart that defines tires to the proper suface.

clintscreations
19-04-2010, 03:51 AM
Moth glad ya like the setup.....our indoor season is over so it might be awhile before I get to run the cat again....big bores here I come...hahahaaaaa

sparrow.2
19-04-2010, 05:49 AM
Do any of you use schumacher tires? Due to the fact that mostly everybody at the track uses a certain tire, that has been proven to work well, I have done the same. What I want to do is use Schumacher tires for the Cat and Cougar, but I don't know what works well. I figure the Blue mini pin works on medium to hard surfaces, but since I haven't even touched them I don't have a clue.

It would be nice if some of the team drivers could make a chart that defines tires to the proper suface.

Schumacher tyres will not work unless you are racing on carpet, grass, astroturf or polished wood.
You can see the treads on the website. The compounds from hardest to softest blue, green and yellow. Yellow is still harder than anything by proline or losi.

If you're running on clay or dirt do not bother trying them. They will not work.

moth898
01-05-2010, 10:40 PM
I need to find a way to keep the front end more stable at speed. My front seems to bounce in the air most of the time at full speed. I was going to add 1/2 ounce lead in the front or lighten up the springs and oil. I'm running 30wt oil in the front with grey rear springs. I'm hesitant to lighten the springs because its handling the jumps great....I'm stuck.