PDA

View Full Version : COUGAR SV Setup thread


Pages : [1] 2

jimmy
12-04-2010, 10:24 AM
Hey guys - please use this thread for posting setups for the Cougar SV to help keep things a little easier to find! :)

bigred5765
12-04-2010, 10:50 AM
heres are finish set up from southport, and thanks for that jimmy

Mossy
12-04-2010, 04:32 PM
Guys,

Editable setup sheets now attached, thanks Carl.

Any questions feel free to ask.

Si

Mossy
12-04-2010, 04:38 PM
Posts added below

Mossy
12-04-2010, 04:42 PM
Posts Added Below

Mossy
12-04-2010, 04:45 PM
Posts Added Below

xavi
12-04-2010, 05:00 PM
Mossy, what does it mean "Reversed Front Wishbones"?
Left to rigth - rigth to left or turned it self...

Haze
12-04-2010, 05:18 PM
Any setup for clay surface?

bigred5765
12-04-2010, 05:58 PM
si pm us ur email addy ill send ove editable setup sheet

DCM
12-04-2010, 06:12 PM
could you not post the editable up here?

bigred5765
12-04-2010, 06:16 PM
9.5mb its beyond jimmys limit for a pdf

DCM
12-04-2010, 06:24 PM
bummer, can photobucket not host it

Mossy
12-04-2010, 06:30 PM
Mossy, what does it mean "Reversed Front Wishbones"?
Left to rigth - rigth to left or turned it self...



If you flip the front wishbones, so that you screw the shock screw into the front rather than the back, i found that it removes so of the mid corner bite you may get from the front end.

Take a look at some of the photos on the cougar thread, im sure most of the team guys have set theres up that way.

As for a clay setup, I will have one after the Euros warmup in May.

Si

MattW
12-04-2010, 08:07 PM
Editable setup sheet will be sorted sometime soon.

lochness42
12-04-2010, 08:09 PM
9.5mb its beyond jimmys limit for a pdf
Send it to me - I'll host it on my webpage and send link back here.
[email protected]

Mossy
13-04-2010, 09:36 AM
Attached are 3 new setup sheets.

Ta

Si

carlin
13-04-2010, 10:37 AM
Attached are 3 new setup sheets.

Ta

Si

How do you get these bigger as you cant see them

JonMack
13-04-2010, 10:42 AM
Click on the image.

bigred5765
13-04-2010, 10:44 AM
How do you get these bigger as you cant see them
lol save them to ur pc and view them of there or print them out

lochness42
13-04-2010, 12:30 PM
Thanks to Carl here is blank setup sheet - working on editable version

resized to about 0,9MB
http://schumacher.lochness42.eu/files/Cougar SV_blank_setup_sheet.pdf

lochness42
13-04-2010, 02:51 PM
So here is also editable version, rushed one (is not very nice), but will do the job.
http://schumacher.lochness42.eu/files/Cougar%20SV_blank_setup_sheet-editable.pdf

bigred5765
13-04-2010, 03:24 PM
nice work thanks, i just used adobe type writer on the original but good work on getting it so small good skills,:)

lochness42
13-04-2010, 04:26 PM
No problem mate. I basically had to do that - who would like to download 9MB file? :D Now you can print it, but also fill it and share with others.
It's first time I did PDF form, so I didn't have any experience and that's also reason why it's not perfect.

MattW
13-04-2010, 05:16 PM
There will be one from Schumacher on their site sometime soon. It's a little smaller in file size :D and in the same style as all their previous ones.

Arn0
15-04-2010, 10:18 AM
Here are Cougar SV Setup Sheet, Manual and so on! (link) (http://www.petitrc.com/setup/schumacher/SetupSheetsSchumacherCougarSV.html)

Data are from Schumacher, Oople and Pavel for now, with more details for setups and on one single page.

Hope that'll grow and can help everyone!

lochness42
15-04-2010, 10:32 AM
Nice job Arn0 ;)
Maybe we should join our forces - your nicely aligned fields and my radio boxes :D
Anyway mine were placed during travel by bus so there was only very little chance of it being nice :D

Arn0
15-04-2010, 10:55 AM
Thx Pavel,
You are welcome if you want to help anytime
Regarding the editable, I did it all over. That's not same feature for the check boxes and also the sheet was cleaned is some way.

I forget to thanks Carl for the raw material (pdf).

dbizzle5
21-04-2010, 09:27 PM
Any setups from Talywain folks?

Mossy
22-04-2010, 09:21 AM
Talywain Setup

Ta

Si

dbizzle5
22-04-2010, 05:16 PM
cheers si. What oils and springs?

Mossy
22-04-2010, 08:01 PM
Sorry forgot to add that.

Front 35wt 4 hole pistons 4.0 springs
Rear 30wt 5 hole 2.5 springs.

Si

mikeyscott
26-04-2010, 09:03 PM
Sorry forgot to add that.

Front 35wt 4 hole pistons 4.0 springs
Rear 30wt 5 hole 2.5 springs.

Si

You state -2 camber, is that per side or total on the rear so -1 each side etc?

Chris Ashton
28-04-2010, 11:42 AM
Official ;) set up sheets and manual now available from our website!

http://www.racing-cars.com/pp/Car_Showroom/Cougar_SV.html

passy
28-04-2010, 12:13 PM
Hi Chris,

Check for a typo on the description of the link to the 'blank' setup sheet

Paul.

Chris Ashton
28-04-2010, 01:28 PM
good spot

mikeyscott
03-05-2010, 05:56 PM
On Tom's set-up at Taly did he reverse the front wishbones? Also the front wheels, were they the slim ones as listed on Schumacher's site?

simoncrabb
03-05-2010, 06:02 PM
On Tom's set-up at Taly did he reverse the front wishbones? Also the front wheels, were they the slim ones as listed on Schumacher's site?

http://rclazy.com/wp-content/uploads/2010/04/P1020514-1280x960.jpg

That pic says yes and yes.

Incidentally, what top deck is that Tom? It doesn't look like any of the ones listed anywhere...

Cockerill
03-05-2010, 07:04 PM
The front arms were reversed, have been at pretty much every meeting I've ran it. It was a change that helped the car a lot and didn't seem to have any negatives so it's just stayed that way.

Wheel are cut down AE wheels in that picture, purely because the tires are glued to them from the Belgium GP. When I mounted stagger ribs to Schumacher wheels I just used the kit ones and cut them down like I did with AE wheels.

Top Deck - It was one of the prototype style one's, I've just had it on the car since testing. It feels the same on track as the production 'soft' top deck, however I think it looks better :thumbsup:

mikeyscott
03-05-2010, 09:04 PM
The front arms were reversed, have been at pretty much every meeting I've ran it. It was a change that helped the car a lot and didn't seem to have any negatives so it's just stayed that way.

Wheel are cut down AE wheels in that picture, purely because the tires are glued to them from the Belgium GP. When I mounted stagger ribs to Schumacher wheels I just used the kit ones and cut them down like I did with AE wheels.

Top Deck - It was one of the prototype style one's, I've just had it on the car since testing. It feels the same on track as the production 'soft' top deck, however I think it looks better :thumbsup:



Hi Tom,

Ok thanks for the further info.

Can you remind me the benefit of running no foams on the ribs?

Mike

Cockerill
03-05-2010, 09:15 PM
Can you remind me the benefit of running no foams on the ribs?

I don't know, I've just always mounted them how I was told to by the Belgium's and it seems to work :thumbsup:

mikeyscott
03-05-2010, 09:28 PM
Any of the team using Ghea pistons?

Cockerill
03-05-2010, 09:34 PM
Not sure there's any even in the country yet!!

I'm sure they will be tested at some point, but at the minute the team are all achieving good results using the standard pistons :thumbsup:

mw02veg
04-05-2010, 03:45 PM
im currently using trish bits 5 hole rounded pistons to good affect :thumbsup:

mikeyscott
04-05-2010, 03:46 PM
im currently using trish bits 5 hole rounded pistons to good affect :thumbsup:

What's different with the trishbits pistons and is he going to be doing them for Jo public ;)

dbizzle5
06-05-2010, 07:07 PM
Did Simon or anyone else run there cougars at Hinkley the other week? If so how did you find it and what setup did you end up with?

fastinfastout
07-05-2010, 07:41 AM
what springs come with the kit?

also, I noticed there are med and long springs. I initially thought the long ones were for the rear, however looking at the manual it can be used for both front and rears.

whats the consensus for the spring lengths? Are longer springs for bumpy surfaces, med for big jumps. Am I correct in saying longer springs are softer and shorter springs are harder?

lochness42
07-05-2010, 07:55 AM
what springs come with the kit?

also, I noticed there are med and long springs. I initially thought the long ones were for the rear, however looking at the manual it can be used for both front and rears.

whats the consensus for the spring lengths? Are longer springs for bumpy surfaces, med for big jumps. Am I correct in saying longer springs are softer and shorter springs are harder?

Long for rear and med for front - I belive that diagram was meant for both shocks. In kit there are 2.5lb spring for rear and 3.5lb spring for front.

fastinfastout
07-05-2010, 10:03 AM
Long for rear and med for front - I belive that diagram was meant for both shocks. In kit there are 2.5lb spring for rear and 3.5lb spring for front.
thanks for your quick reply.

now to find a place in the UK that will ship for a decent price to Australia. I had 2 springs and 2 undertrays in my checkout at schumacher-racing, and they quoted 33pounds for shipping alone:o

unfortunately they didnt have the parts I wanted when I placed the order the the SV.

Does anyone know of some places that will ship parts overseas, for a decent price?

lochness42
07-05-2010, 11:11 AM
thanks for your quick reply.

now to find a place in the UK that will ship for a decent price to Australia. I had 2 springs and 2 undertrays in my checkout at schumacher-racing, and they quoted 33pounds for shipping alone:o

unfortunately they didnt have the parts I wanted when I placed the order the the SV.

Does anyone know of some places that will ship parts overseas, for a decent price?

They are posting by UPS by default - hence the high postage. If you'll post your order by email and ask for Royal Mail, it'll be cheaper but also delivery will take longer (nothing could beat 2-3 days delivery from UK to Slovakia so far by UPS).

Q_man
08-05-2010, 12:51 PM
Hi,
Just wondering what the kit link mounts were?
Thanks
Wayne

Swiss
10-05-2010, 09:56 AM
I used the Trishbits pistons and brass weights at the weekend. And what an awesome additon to the car. I would highly recomend anyone buying them. Nice guy too, always willing to help with questions etc :)


What's different with the trishbits pistons and is he going to be doing them for Jo public ;)

mikeyscott
10-05-2010, 09:58 AM
I used the Trishbits pistons and brass weights at the weekend. And what an awesome additon to the car. I would highly recomend anyone buying them. Nice guy too, always willing to help with questions etc :)

Pics and any more details ;)

mikeyscott
11-05-2010, 07:02 PM
Any RHR setups?

ian h
11-05-2010, 07:23 PM
Any RHR setups?

+1 here please, need to make sure I have all the right gear for the oople race.

P_B
11-05-2010, 07:44 PM
One thing is for sure, your man 'GOD' was running some freaky naughty short front camber link plates with an armful of washers at RHR. (Mossy had his multi-hole option ones on)

http://i197.photobucket.com/albums/aa41/perapi/IMGP0813.jpg

Some team drivers also ran the plastic spacer above the rear camber link plate to help lower the ballstud.

http://i197.photobucket.com/albums/aa41/perapi/IMGP0675.jpg

Cockerill
11-05-2010, 08:24 PM
I'll get my setup posted as soon as my laptop stops playing up, hopefully tonight :thumbsup:

Cockerill
11-05-2010, 09:31 PM
I tried uploading but it's too big for the forum, should be on the Schumacher site tomorrow though :thumbsup:

The front link was something we have been testing to help lose some of the steering the car seems to have. I found it worked well at RHR, Si thought the 45mm link was better though. When we were testing today we both settled on the 45mm front link.

The plastic spacer at the rear doesn't necessarily have to go under the link plate, it can be used as a tuning option. I personally always run with the plate as low as possible, and normally 1mm of spacing on the ballstud too.

Any more questions feel free to ask

ian h
11-05-2010, 10:19 PM
Do all the washers up front give an in between feel, or is there any other reason for shortening the link and then in effect lengthening it again with the washers?

scottg
12-05-2010, 07:16 AM
thanks for your quick reply.

now to find a place in the UK that will ship for a decent price to Australia. I had 2 springs and 2 undertrays in my checkout at schumacher-racing, and they quoted 33pounds for shipping alone:o

unfortunately they didnt have the parts I wanted when I placed the order the the SV.

Does anyone know of some places that will ship parts overseas, for a decent price?

fastinfastout, hit up actionrc.com.au. we have schumacher parts coming into australia every week, including cougar gear. we have one kit left in stock at the moment.

nottmboy
12-05-2010, 07:48 AM
When we were testing today we both settled on the 45mm front link.tom what surface was this on?

Cockerill
12-05-2010, 08:38 AM
Do all the washers up front give an in between feel, or is there any other reason for shortening the link and then in effect lengthening it again with the washers?

It's much easier to adjust the washers than change the link plate, especially with so little time between practice runs. I played about the amount of washers in practice and 4 is what felt best for me on track.



tom what surface was this on?



EPR Track, so Astro/Concrete

simoncrabb
12-05-2010, 10:17 AM
Interesting, so, generally it has been found (on astro) rear links longer and front links shorter, increasing rear grip and reducing steering?

David Poulter
12-05-2010, 10:17 AM
Tom

Were you running the stagger ribs with foams in?

Dave

Swiss
12-05-2010, 04:30 PM
Hope these are OK. There is also a brass weight under the servo, but you cannot see it, so no point in trying to photograh.

Paul Timberlake

Pics and any more details ;)

mikeyscott
12-05-2010, 05:15 PM
Very nice.

Nice Tekin in there too

johan neyens
13-05-2010, 01:42 PM
What's the ride height you use for astro tracks?

How should i best messure this?

Cockerill
13-05-2010, 05:04 PM
Tom

Were you running the stagger ribs with foams in?

Dave

No, I run them without foams and on a cut down wheel.

What's the ride height you use for astro tracks?

How should i best messure this?

I normally start with about 21mm ground clearance, from the chassis to floor. Alternatively it's about rear drive shafts level and then make sure the chassis is level from the side.

Raul Garcia
14-05-2010, 12:09 AM
Cockerill, can you shed some light on this please. I tried alot of things.
Now we had two cars on the track, initial setups were close main difference one had saddles and low diff. The other had stick and high diff. One car had 40wt Schumacher oil frt and rear, mine had the high diff, 42.5 Losi rear, 37.5 losi front.
We both agreed, way to much steering either way. So we chased out the steering.
Both cars had foward rear shocks, hubs foward, top of shock inner hole, lower mount stck , 5* rear toe, swapped camber link mount with spacer, no sway bar. 83/20 8.5 sp v3.0 w 2.1 pro, the other was 80/23 sp v3 10.5 w 2.1 pro.
We both tried the rear shocks on the back of the tower. It wasn't helping.
On the front , the steering link ball was moved to the rear hole on the rack. Top of the shock all in, inner arm, arms reverse sweep. 0* castor block, shim on lower for the Steering block.
Tires- fast at the track is BK bar pink rear, taper pin pink front. We could not get that combo to work. So we went to DD's rear, rounders frt, this helped.
I'm waiting for my springs, just picked up a set of 2 & 4 hole pistons. Time to do some experimenting now.
This track is hard packed 90x65

MattW
14-05-2010, 07:21 AM
.5 rear toe??

I wonder if you're over damped and if there is no body roll.

I presume yoku don't have th eroll bar on?? if so, take it off!

mikeyscott
14-05-2010, 07:26 AM
I thought 4 degree on the rear was enough anyway!

Once I'm happy with the car I'll be looking at 3 degree

I'm trying the Ghea 4 and 5 hole pistons at the moment, but I think that's a mistake as the holes are HUGE compared with the Schumacher ones :( 1.55!

So waiting on the Schumacher rounded 5 hole pistons

johan neyens
14-05-2010, 07:36 AM
How much rebound should i have on my shock's?

Cockerill
14-05-2010, 08:52 AM
How much rebound should i have on my shock's?

I normally have about 1/2 rebound with my shocks.

Raul Garcia
14-05-2010, 11:34 AM
.5 rear toe??

I wonder if you're over damped and if there is no body roll.

I presume yoku don't have th eroll bar on?? if so, take it off!

Matt, 5 degree toe block, and no sway.

kwiksi
16-05-2010, 01:31 PM
I noticed on some of the "Driver notes" setup sheets. The team uses a long ball socket cut down 2.5 mm. What and why is this? What benefit does it do?

fastinfastout
16-05-2010, 06:14 PM
in the manual it says you can change anti-squat from 0-3degrees but does not show you how.

obviously to get more anti-squat, I need to raise the fore side of the rear pivot block, do I use 0.03 shims like on the AE?
EDIT....found a setup sheet and saw you can put washers under the rear pivot block,
does that mean the standard setup is 3 degrees anti-squat? And putting washers b/n the rear bulkhead and pivot block will reduce antisquat? If so, how many washers gives what degree of anti-squat?

it also says 4.5 degree anti-squat is possible with additional parts. Is this a new rear pivot block that sits the hinge pins lower?
What parts do I need for 4.5 AS?

moth898
16-05-2010, 07:53 PM
No spacers = 3 degrees anti-squat, more spacers less antisquat. The 4.5 antisquate needs a different lower tranny block u772 & u773.

I unscrewed the front shock shaft ball socket 2mm and added a spacer between the spring seat and ball socket. Gave me some extra suspension travel up front.

dbizzle5
16-05-2010, 10:50 PM
Ran my cougar at the Mid East Regional today at Broxtowe and all I can say is awsome! So good to drive and very fast. This car is definatly improving my results. :thumbsup:
Have tried to fill in a setup sheet but cant save it? How do you do it?

eichkay
17-05-2010, 12:25 AM
Ran my cougar at the Mid East Regional today at Broxtowe and all I can say is awsome! So good to drive and very fast. This car is definatly improving my results. :thumbsup:
Have tried to fill in a setup sheet but cant save it? How do you do it?


Some systems (im on a mac btw) let you save via the print method.. i hit print and then theres a save to file option and this allows you to save as pdf, it wont let you edit this version tho so make sure its 100% correct otherwise you'll be doing it all over again..

fastinfastout
17-05-2010, 04:37 AM
No spacers = 3 degrees anti-squat, more spacers less antisquat. The 4.5 antisquate needs a different lower tranny block u772 & u773.

I unscrewed the front shock shaft ball socket 2mm and added a spacer between the spring seat and ball socket. Gave me some extra suspension travel up front.
thanks for that.

so besides eyeing it off, how many spacers = 0 anti-squat.

and how did you find out about the lower tranny blocks u772 & u773, as I have been looking and cannot find anything about them on schumachers website. Still in production?

fastinfastout
17-05-2010, 04:42 AM
does this car like x6 like ride heights, a few mm higher than other buggies?

simoncrabb
17-05-2010, 07:17 AM
I tried uploading but it's too big for the forum, should be on the Schumacher site tomorrow though :thumbsup:

The EPR setup on the Schuey site is broken :-(

And the RHR isn't there yet...

Will be interesting to see both, I played with Cougar setups yesterday and I'm loving it...

simoncrabb
17-05-2010, 07:58 AM
Sorted, here's Tom's EPR and RHR setups

http://rclazy.com/2010/05/17/setup-schumacher-cougar-sv-tom-cockerill/

kwiksi
17-05-2010, 08:52 AM
I noticed on some of the "Driver notes" setup sheets. The team uses a long ball socket cut down 2.5 mm. What and why is this? What benefit does it do?

Anyone?
Thanx

bigred5765
17-05-2010, 09:28 AM
Anyone?
Thanx
it gives more droop,

simoncrabb
17-05-2010, 09:44 AM
Yep, I tried this yesterday, slightly longer shocks front and rear, more droop, tis good.

I'm going to measure my shocks and compare to Tom's measurements.

mikeyscott
17-05-2010, 09:46 AM
Done the rears and much better, just need to do the fronts this week.

Think I was over damped on Sunday at TORCH on the rear though

burgie
17-05-2010, 10:05 AM
when adding more rear droop to the car, does the chassis have to be cut at all?

I seem to remember that when building my cougar, the chassis edges were limiting the down travel of the rear wishbones. Could be wrong there though.

bigred5765
17-05-2010, 10:37 AM
yeah Chris just dremmel the edge of the chassis were the wishbones touch

burgie
17-05-2010, 10:47 AM
this evening, I will be mostly covered in carbon fibre dust :lol:

kwiksi
17-05-2010, 11:54 AM
I understand now. I already used longer rod end in the rear, but is there a longer end for the front instead of unscrewing the shock end? If so what is the part#?

bigred5765
17-05-2010, 12:38 PM
nope just unscrew them 2-3 turns,we dont use longer ones just inthread them all 3 turns.

johan neyens
18-05-2010, 06:43 PM
Does anyone have a clay set up?

Raul Garcia
18-05-2010, 07:41 PM
Does anyone have a clay set up?

I'm working on it..

Adam Skelding
19-05-2010, 08:47 PM
Ran my cougar at the Mid East Regional today at Broxtowe and all I can say is awsome! So good to drive and very fast. This car is definatly improving my results. :thumbsup:
Have tried to fill in a setup sheet but cant save it? How do you do it?

Same method as here fella:
http://www.oople.com/forums/showthread.php?t=30811

dbizzle5
19-05-2010, 09:51 PM
Cheers Adam. Worked a treat except now Ive done it the file size is to large to upload to oople! How are people putting up there pdf files of setups?

MattW
19-05-2010, 10:04 PM
I think there is also a way that you can output the setup as a pure jepg which is likely to be a smaller file. I think it's called the snapshot tool, or something similar, where it copies the whole form, then you can paste into a blank jpg file. Can't remember how you do it though, because I use a pdf writer.

dbizzle5
19-05-2010, 10:12 PM
Cheers Matt! Think its worked.

hansie
20-05-2010, 07:04 AM
Hello all,

My set-up for clay as used on my home -track.
Stick pack configuration
No extra weight placed (yet)

Rear:

oil 35 wt
Spring as supplied with kit
piston 6 holes
Spacer onder bal-stud attachment removed.
Added 2 extra shims onder rear ball-studs
Camber link at maximum length
Shocks on the rear of the shock tower.
Shock mounting on arm : outside position
Shock mounting on tower : inside hole
4 degrees toe-in
-1 degree camber
short wheelbase
Added extra droop by installing longer ball-cups on the schock

Front:

oil 40 wt
Spring as supplied with kit
piston 4 holes
Short camber link
1 extra shim under ball-stud
shock mounting on arm : outside position
shock mounting on tower : middle hole
1 degree toe in
-1 degree camber
front arms swapped

Hope it helps:
Car went like this at my local track

http://www.youtube.com/watch?v=kteZfjTUl2E

Greetings

Hans

fastinfastout
20-05-2010, 11:47 AM
whats the advantage of having extra droop on the rear.

I find it has plenty standard.

if anything, I would find that the cvd's would bind if anymore droop, on most other cars anyway.

ian h
20-05-2010, 12:57 PM
whats the advantage of having extra droop on the rear.

I find it has plenty standard.

if anything, I would find that the cvd's would bind if anymore droop, on most other cars anyway.

Trying it today for the first time, car seems more stable especially through the bumpy stuff.

dbizzle5
23-05-2010, 08:48 PM
Heres my setup for eastrax from today.

dbizzle5
23-05-2010, 08:53 PM
Here!

moth898
25-05-2010, 01:53 AM
I'm trying to keep the rear end from swinging out under acceleration, do I tighten or loosen the diff?

Tbone
25-05-2010, 07:17 AM
Hy Guys,
for those who run non loose dirt ... give the saddle configuration a try ...
It's really cool :)

regards Tom

Raul Garcia
27-05-2010, 05:02 AM
Well another night down and further testing on hard pack high bite clay.

Front:
stock upper mount
stock lower mount
4 hole 32.5
3.5 spring
stock ball stud height
outer camber link on castor block
stock ackerman
5* castor block
Associated inline steering block w associated stub axle
reversed front arm
0 Toe
-1* camber

Rear:
72t spur/26
2.6 gear
stock upper and lower shock mount
no sway
4 hole 32.5 Losi
rear arm shaved and shimmed 1mm foward
Camber plate lowered plastic spacer on top
inner ball stud lowered 2mm
center hole on hub
-1* hubs full foward
Diff low
stock anti squat
4* toe
-1* camber
Modified camber plate 38mm between ball studs
Shocks foward
30g weight added to chassis rearmost outer

Soft upper deck
JC Rulux wheels
JC Rounders
Proline Holeshot 2.0
SP GT 2.1 w 422 software
SP V3 10.5 stock timing


The car was the best it ever has been so far. There are still a few thing to try to make it faster. Tonight the car was a 1-2 finish, two Cougars finishing less than a second apart. Amazing wheel to wheel race.

Brodie-72X
27-05-2010, 11:32 AM
Can anyone tell me a good starting point for gearing a Speed Passion V3 8.5? & also the settings for the Speed Passion GT2 esc, also if it needs any accessories etc, thanks!

Tbone
28-05-2010, 07:19 AM
Hy,
gearing with the standart Spur will be the 23pinion but it also depend on the size of your track ! :)

for the Sp speedo I ran it :
1
3
4
3
4
1
1
1
8
2
and it works great:)

regards Tom

mikeyscott
28-05-2010, 07:26 AM
Hy,
gearing with the standart Spur will be the 23pinion but it also depend on the size of your track ! :)

for the Sp speedo I ran it :
1
3
4
3
4
1
1
1
8
2
and it works great:)

regards Tom

Bit out of the FDR for the SP V3 motor I think? May have to re-look at my gearing again. I'm on a 78 /28 - FDR 7.2

Tbone
28-05-2010, 07:55 AM
Hy,
i ran the 7,5 with the stockspurgear with an 21 pinion on a small track ..

regards Tom

Brodie-72X
28-05-2010, 10:16 AM
Hy,
gearing with the standart Spur will be the 23pinion but it also depend on the size of your track ! :)

for the Sp speedo I ran it :
1
3
4
3
4
1
1
1
8
2
and it works great:)

regards Tom

what did it temp at? i haven't raced much lately(so i feel rusty..), but this is the track; http://www.youtube.com/watch?v=RL4dm4QOoBk&feature=player_embedded

kwiksi
05-06-2010, 10:40 AM
Heres my oudoor setup. Let me know what you guys think or if there are any questions.
Forgot to add the longer screw and locknut as insurance for the steering bushing.
Note: -3 turns on front shock not rear.

http://i81.photobucket.com/albums/j203/dasupacat/scan0001.jpg

Raul Garcia
10-06-2010, 06:19 AM
This is a high bite clay setup. Let me know what you think.
http://i16.photobucket.com/albums/b18/RaulGarcia123/CougarSVBEST.jpg

I forgot to add long rear ball cups.

Chris-S
10-06-2010, 08:54 AM
Does anyone have any indoor setups? Running full carpet with jumps.

Thanks

Mossy
10-06-2010, 08:55 AM
I think i posted a setup for West Bridgford earlier in th thread, take a look at that.

Si

mikeyscott
10-06-2010, 11:06 AM
Any EPR set-ups from the guys? Trish, Schumacher and Ghea pistons?

Aran
11-06-2010, 09:15 PM
anyone got a base for a grass setup or would it be similar to a high grip astro?

chatts#725
12-06-2010, 12:45 PM
anyone got a base for a grass setup or would it be similar to a high grip astro?
I ran mine box standard with slim stagger ribs, 7.5 and trishbits brass was great as it was.:thumbsup:

mudflap74
22-06-2010, 11:52 PM
Guys, I just wondering why you are reversing the arms? What benefit is it having?

Thanks

Arn0
23-06-2010, 12:28 AM
Guys, I just wondering why you are reversing the arms? What benefit is it having?

Thanks
Front or rear?
Reversing the rear ones allow to mount the shocks on the rear on the wishbones
On the front, that gives you a wheelbase increase of 1.5mm

HTH

Raul Garcia
23-06-2010, 01:12 AM
Front or rear?
Reversing the rear ones allow to mount the shocks on the rear on the wishbones
On the front, that gives you a wheelbase increase of 1.5mm

HTH
Arno we dont flip the rear arms just move the ball stud for the lower to the backside of the arm.

Arn0
23-06-2010, 03:11 AM
Arno we dont flip the rear arms just move the ball stud for the lower to the backside of the arm.
Thanks to correct the point. Don't know what i was thinking at.
And it seems I build one. Shame!

mudflap74
26-06-2010, 11:58 PM
Hey guys just wondering. Finally got my parts for the Schumacher and got to run it this week. Handled not too bad but I am finding the front end really dives even on rolling jumps.
Running fairly basic setup. I am wondering if running the saddle pack configuration would be better for our track.

Very tight low traction dusty track. The X6's run very well there.

Just find it odd the balance is so far to the front?

Thanks

ulrich
27-06-2010, 10:06 AM
Hey guys just wondering. Finally got my parts for the Schumacher and got to run it this week. Handled not too bad but I am finding the front end really dives even on rolling jumps.
Running fairly basic setup. I am wondering if running the saddle pack configuration would be better for our track.

Very tight low traction dusty track. The X6's run very well there.

Just find it odd the balance is so far to the front?

Thanks

I tired the saddlepack layout yesterday.. it was a little better on our 3 double jumps, but I will work further with the standard layout because there is a mess in the car wires/cables in the car...
I was also test the standard layout with a 115gram lead underneth the chassis (on rearend part), that was really good!! so I will contuine with standard layout and 115g lead and try with a little more weight on rear maybe the trishbits rear brass item or a lead plate under the half of the battery in rearend. The car was much more set with the lead.

note: front arms reversed and rear arm is 2mm cut off to moving more forward.

Mossy
29-06-2010, 10:07 AM
Setup attached for Saturdays National at Oswestry. Both myself and Tom run the same setup.

Si

Brodie-72X
01-07-2010, 06:58 PM
Hey Si,

Whats the front camber link plate size you're using?

moth898
01-07-2010, 08:32 PM
he's using a custom piece, 55mm

Brodie-72X
09-07-2010, 04:57 PM
Cheers. So can anyone tell me what a good starting point for gearing Speed Passion V3's;
6.5
7.5
8.5
& 9.5 on dirt that is(if it makes much difference)
Also what ESC settings to start with & what software to use on the Speed Passion GT2.0
I'm using these with the Speed Power 5800mah 55c & i've got 2 fans mounted in there, one on ESC the other directing towards the motor. The main problem i have is keeping stuff cool. So what is a good temp read too?

Many thanks,
Brodie.

moth898
09-07-2010, 08:43 PM
I'm using a speed v3 7.5 with a 82 spur and 20 pinion, I sometimes run a 81 if the track is dryed. Oem esc program with the timing set at 7. I get between 160 - 170 degrees. I run holeshots if its dry, step pins when it muddy or caliber's when it dusty. here's a couple of vids

http://www.youtube.com/watch?v=po9xRHyJWRU&feature=related

http://www.youtube.com/watch?v=5vZblIFSjDQ&feature=related

Brodie-72X
18-07-2010, 07:21 PM
Anyone else on the above gearing question? :)

R&M-RACEWAY_ANTHONY
21-07-2010, 08:59 AM
hi any 1 got a set up for eastrax for the couger?

Nick
21-07-2010, 12:00 PM
eastrax setup lee

http://www.oople.com/forums/showthread.php?t=44109&page=6

pizzaman
23-07-2010, 03:15 PM
has ne1 got the Toms or Simons setup from southport national

Cockerill
24-07-2010, 10:17 AM
Pretty much the same as EPR which is on the Schumacher site, except I was running 40/35 oils front/rear

pizzaman
24-07-2010, 10:53 AM
cheers for that tom much appeciated:thumbsup:

pizzaman
25-07-2010, 08:20 PM
ne1 got a team drivers setup for all grass

Brodie-72X
27-07-2010, 11:12 PM
Cockerill - you got a pm.

Mossy
16-08-2010, 08:20 AM
Setup attached for Stotfold National on Saturday.

Ta

Si

PaulRotheram
17-08-2010, 05:24 PM
Any idea on gearing for a sintered 6.5 on the standard 83 spur?
What's the benefit behind running the 81?

lochness42
17-08-2010, 06:15 PM
Any idea on gearing for a sintered 6.5 on the standard 83 spur?
What's the benefit behind running the 81?

You can play with weight distribution if you're keeping same FDR, that's the difference.
Other than that - it allows you to use lower FDRs

snej
30-08-2010, 08:41 AM
hello guys,

i´m searching for a set up on a low grip clay track.
in high speed corners there is no problem, but in slow corner you must be so carfully on the gas, otherwise the car turned completly around.


what i changed so far is the 5° alloy rear strap and of course a softer shock setting.
what else can i change for more grip on the rear? other position of the Turnbuckle!?.......need a bit help

so thanks

jens

spud31
30-08-2010, 05:43 PM
anyone got a setup for coventry m.c.c (juniors an vets venue)

mudflap74
02-09-2010, 05:03 AM
Hey guys, just wondering if some people are finding that the diff has to be super tight almost locked to keep it from slipping.
I finally got the car working fairly well...need some more rear traction and think I am going to change to saddle packs to see how that works.

Diff is built well and smooth just needs to be cranked down to keep it from slipping.

Martyn (Bomber)
05-09-2010, 03:01 PM
Hi,
I Just finished a hole season with my SV at my local club and mine is just as the manual says, open 90 degree from fully tight, have you done the cirlip mod?

/tobys
05-09-2010, 04:33 PM
what's the circlip mod?

Martyn (Bomber)
05-09-2010, 05:05 PM
You open/stretch the circlip with some circlip pliers before you position it in the diiff so it sits in it's recess nice and tight which prevents any slipping or loosening of the diff.

Chris-S
11-09-2010, 03:37 PM
Hey guys, just wondering if some people are finding that the diff has to be super tight almost locked to keep it from slipping.
Diff is built well and smooth just needs to be cranked down to keep it from slipping.

Try a new set of spring washers in the diff. Mine lost their springyness.

bat
26-09-2010, 06:54 PM
Hi

need some help with setting up for indor flat carpet track with high grip
Track is tight, used for onroad racing there are only two jumps and some dishes on it.

i was wonder if it is possibile to set up cougar like onroad car and if that make a sense?

Thomas B
29-09-2010, 04:02 PM
The indoor season is coming. Is there anyone who has driven the Cougar indoor on carpet and have some setup tips?

MP9
11-10-2010, 07:22 AM
Hi Simon
Do you have a clay setup for a very bumpy track I have to use control tyres which are X-2000 Losi on back J concepts bar codes on the front.. Anything I like can be used on the front.. Im just using the setup in the manuel but it seems to have way to much steering and could also do with some more rear end grip if at all possible...But this maybe because of the tyres not to sure also must use the foam that comes with the tyres as well...Im using an 8.5 with 2.6 ratio would like to try the 2.8 ratio but don't have the Layshaft gear at the minute...Any help would be greatly appreciated..

reg
11-10-2010, 07:43 PM
You open/stretch the circlip with some circlip pliers before you position it in the diiff so it sits in it's recess nice and tight which prevents any slipping or loosening of the diff.

Hi,im not saying you are wrong so please dont take it the wron way,but would doing this make it even looser rather than tight

Snappy
14-10-2010, 10:20 AM
Hi Simon
Do you have a clay setup for a very bumpy track I have to use control tyres which are X-2000 Losi on back J concepts bar codes on the front.. Anything I like can be used on the front.. Im just using the setup in the manuel but it seems to have way to much steering and could also do with some more rear end grip if at all possible...But this maybe because of the tyres not to sure also must use the foam that comes with the tyres as well...Im using an 8.5 with 2.6 ratio would like to try the 2.8 ratio but don't have the Layshaft gear at the minute...Any help would be greatly appreciated..

G'Day MP9,

I've been running a Cougar in Sydney for a few months now at Ryde, Castle Hill and St Ives tracks which usually have pretty good grip for the big events. Is the surface high grip clay? At the recent NSW State titles we had heaps of grip on the clay but the surface wasn't really bumpy.

I ran x2000's at the Ryde Club challenge with J Concepts barcodes at the front.

When I first ran the car it had heaps of steering and to dial some of it out I run thicker shock oil up to 40wt Associated at the front with standard spring i think its 3.5. I've flipped the front arms to give more wheel base also.

I run the rear shocks at the back of the gearbox and suspension arms. My theory is it will add a little more weight over the rear wheels with the shocks at the back.

Rear shock mounted on the inner most hole on the shock tower and middle hole at the arm. Currently I run the rear a little soft with 25 to 30 wt oil and a softer spring than standard.

Car seems to go OK and still steers very well it's more predictable for me with this style of setup.

All the best

Snappy
14-10-2010, 10:23 AM
Hey guys, just wondering if some people are finding that the diff has to be super tight almost locked to keep it from slipping.
I finally got the car working fairly well...need some more rear traction and think I am going to change to saddle packs to see how that works.

Diff is built well and smooth just needs to be cranked down to keep it from slipping.

I ended swapping out the plastic part/ retaining ring that sits up against the C clip with a metal one out of a CAT SX diff. If the CAT SX has this why did the Cougar not come with a metal retaining ring?

mudflap74
22-10-2010, 06:12 PM
Ok, so after much frustration with the diff I have purchased all new insides to the diff. Rebuilt it last night. Seems better for sure. However the two internal gears still catch and do not run free like they do when the tranny halves aren't screwed together.. Any ideas.

I have also reversed the shocks and notice that now the springs rub on the tie rods.. Tried putting in some spacers on the shock at the top to move it out some but still rubbing .

bigred5765
30-10-2010, 11:29 AM
heres toms set up sheet from the player 2010 2wd

MikePimlott
08-11-2010, 11:52 AM
heres toms set up sheet from the player 2010 2wd

Can Tom or someone confirm if this is with the trishbits weight front and rear ??

Cockerill
08-11-2010, 12:25 PM
It's not got any weight added front or rear. I tend to only run the from weight when I feel a need to stop the front end lifting up under power.

mikeyscott
08-11-2010, 08:10 PM
Hi,

Any Ardent Raceway setups yet?

M

The Doctor
10-11-2010, 08:05 PM
Just bought a Cougar SV and was wondering whether you generally run slim or normal width front rims. I have been racing a XXX-CR for the past few years with the following:

Carpet => yellow 2WD minipins on normal rims
Grass => yellow 2WD minispikes on normal rims (or staggers on slim rims if fresh grass)
Astro=> yellow staggers on slim rims.

Same for the Cougar?

bigred5765
10-11-2010, 08:24 PM
only time we have run narrow rims is for staggers on mega high grip

langers
10-11-2010, 09:24 PM
Carpet => yellow 2WD minipins on normal rims at bridgeford any where elsewith more grip eg broxtowe/ardent staggers on slim rims seam to be the popular choice
Grass => yellow 2WD staggers on slim rims worn or new
Astro=> yellow staggers on slim rims.

The Doctor
11-11-2010, 07:55 PM
Thanks chaps.

mikeyscott
13-11-2010, 07:37 PM
Any suggested set-ups for Taplow as may head up there in the coming weeks?

People running mini pins all round?

gazhillAE
17-11-2010, 08:58 AM
only time we have run narrow rims is for staggers on mega high grip

Everyones running them on cougar with mini pins as far as I know
Eugene definetly, me definitely, Tom at Worksop far as I know also

Who ever asked about the carpet setup for ardent, start with something like 45 and 40 in the back and the usual setup you use and adjust round it works well

Si moss has put a setup on the petite site for carpet works great it's using AE oil by the way and rear roll bar? The idea on carpet Is to get rid of as much grip as possible leaving it able to slip and hand brake round corners making it safer!

Anything else????

MrWolf808
17-11-2010, 11:06 PM
hi mikey.

for taplpw, people are tending too use staggers on the front and most carpet setups, but i have gone a little thicker with the shock oil as they tend too have fairly large jumps and high grip carpet. what works well for me is mini spikes as opposed too the staggers, i have used pins at taplow before but i found them a bit too aggresive.

just my ten pence worth.

hazeandfizz
18-11-2010, 06:50 AM
Mikey,

If you pop up to Taplow I will be there so find me and we can run through a few setups.

Cheers,
James.

Any suggested set-ups for Taplow as may head up there in the coming weeks?

People running mini pins all round?

reg
18-11-2010, 07:14 PM
Si on the westbridgford set up it shows a different setup on the sheet to one that is writen above it,which is the one thats best to use as i race there every week,
thanks

cornishboy176
12-12-2010, 07:09 PM
Hi there anybody got any gear ratio set ups for either a 6900kv or 5700kv mamba max please

fast wil
14-12-2010, 02:49 PM
hello, i will post a film and have a question?
I have a cougar and running only on carpet so far.
http://www.youtube.com/watch?v=dXKs_jXppU0
(http://www.youtube.com/watch?v=dXKs_jXppU0)
Wich setup will I start with if i am gonna race on this event. And wich tyres do I need?
Sorry for my typing.

mikeyscott
14-12-2010, 08:27 PM
What set-up did people run at Taplow for Round 3?

Anyone got a base Petit set-up?

hazeandfizz
14-12-2010, 08:47 PM
Hi Mikey,

I ran,

35WT 5 Hole 4.5 Spring front
30WT 5 Hole 2.0 Spring rear with kit roll bar rear.
No extra weight, Mini pins (yellow) rear and Mini spikes front (yellow)
6.5T Speed Passion motor on 23T/78T.
Mid position on shock towers, 5° castor blocks, front bones reversed and 4° rear toe in block.

Was good enough for a place in the B final:thumbsup:.

Cheers,
James.

What set-up did people run at Taplow for Round 3?

Anyone got a base Petit set-up?

mikeyscott
14-12-2010, 09:04 PM
Hi Mikey,

I ran,

35WT 5 Hole 4.5 Spring front
30WT 5 Hole 2.0 Spring rear with kit roll bar rear.
No extra weight, Mini pins (yellow) rear and Mini spikes front (yellow)
6.5T Speed Passion motor on 23T/78T.
Mid position on shock towers, 5° castor blocks, front bones reversed and 4° rear toe in block.

Was good enough for a place in the B final:thumbsup:.

Cheers,
James.

Cheers. Think Steve is heading to Taplow this Friday, I'm hoping they'll do a Thursday meeting during the Christmas break (got work xmas bash Friday :cry: and it'll be crap.)

I've been running Ghea pistons, but haven't tried the rounded pistons yet.

fast wil
21-12-2010, 05:32 PM
hello, i will post a film and have a question?
I have a cougar and running only on carpet so far.
http://www.youtube.com/watch?v=dXKs_jXppU0
(http://www.youtube.com/watch?v=dXKs_jXppU0)
Wich setup will I start with if i am gonna race on this event. And wich tyres do I need?
Sorry for my typing.


Is there anyone who wants to look at this video and can help me out with my set up.
I need a set up too start with. Maybe one of the sheets wich are already posted above. Wich one will fits the best with the track on the video.

http://www.youtube.com/watch?v=dXKs_jXppU0
(http://www.youtube.com/watch?v=dXKs_jXppU0)

jeffrey
21-12-2010, 06:39 PM
@fast wil
i have post a answer on modelbouwforum.nl, its not the best set up but for me it works good in vlijmen manege. i gone try a few new thinks the next race.
grtz jeffrey

Adam F
29-12-2010, 05:36 PM
How much weight are people running on their SV's?

I have ordered the 4 degree trishbits part and have the front under-servo weight, but havent managed to get it to feel right unless I add a load of weight under the rear of the lipo. (80g!)

Cockerill
29-12-2010, 05:45 PM
How much weight are people running on their SV's?

I have ordered the 4 degree trishbits part and have the front under-servo weight, but havent managed to get it to feel right unless I add a load of weight under the rear of the lipo. (80g!)

I personally run very little. My standard outdoor setup is just ~20g under the servo and ~15g around the receiver for left-to-right balance. This usually puts the car at about 1500g total.

At the Euro's on clay I did run about 60g at the rear and saddle packs, as I found it settled the car and made it easier to drive. If I had more time to set the car up it may not have needed it.

Adding weight tends to settle the car and make it easier to drive, which suits some people, whereas I like the car to be responsive which is best achieved with a light car.

gazhillAE
04-01-2011, 12:01 AM
Si on the westbridgford set up it shows a different setup on the sheet to one that is writen above it,which is the one thats best to use as i race there every week,
thanks

Yes it does from memory, try both, i think the differences were in the rear holes on rear tower and no anti roll bar.

Those setups are probably a start of the day setup and an end of day setup when the tyres had bedded in etc.

Both work depending on newness of tyres, i prefer the anti roll bar on as it work well and you can throw it around alot more, alot more forgiving indeed! I ran 45 AE and 40AE when i last ran on carpet which is what Si ran on that setup

TKG26
12-01-2011, 06:57 PM
New cougar starting setup for carpet?

We just switch our track over to carpet. And as luck would have it im getting a Cougar tomorrow.

Is the kit setup the best place to start for running on carpet? I understand you guys in the UK run a lot of carpet.. So i thought i would drop in here and get some advise.. as i hope to start my build tomorrow nite :)


Below is a clip of our first race on rug. We had just finished a year of dirt racing. To give you an idea of what we run on. My first nite out was pretty good but i had so much rear grip i had a hard time keeping the front wheels on the ground.


http://www.youtube.com/user/gonzales34#p/a/u/2/CAmN9XuqYS0

Chris Ashton
13-01-2011, 02:44 PM
Danny's Ardent set up is now on our website.

TKG26
13-01-2011, 02:49 PM
i noticed a 3ft slipper setting.. Is this to keep the nose down? That seems like a long time to slip.. Is it to take the bit out of the tires?

moth898
13-01-2011, 06:21 PM
Its probably set for three feet to give the diff a break. I din't think your track needs any more than 1 foot. I had it loose also during practice and had to tighten it to get enough power down for the corner jump.

TKG26
13-01-2011, 06:25 PM
thanks bill. My x6 still has the wheely problem.. For what ever reason i lost a second a lap this week.. I am going back to a non boosted profile on my speed passion. Who would think that these 13.5 could be so powerfull. I like to pull full trigger so ill need to detune the power plant! LOL

Cougar in the house hope to have it rolling for wed nite...

moth898
13-01-2011, 07:16 PM
I'm going to try to make it for a race also in the next couple of weeks also, I'll show you the mods that factory driver Tom Cockrill advised that work awsome on the car. I don't run any front weight on my car, I have plenty of traction stock, but some guys in europe put 21 grams right under the servo to keep the front end down. You can either put 3 bars of lead or there is a company named trishbits that makes a nice brass weight just for that purpose. The owner goes by the moniker trish on the forum. Have fun with the cougar, I'm sure you'll love it.

By the way, the turbo isn't needed with the speed passions esc, it's really smooth stock. I could check how I have it set and send it to you, I know I dialed a little more drag break and timming don't remember the exact values.

Have fun,
Bill

Cockerill
19-01-2011, 07:56 PM
My setup from Moto Arena is attached as someone asked for it.

Any questions feel free to ask

Tom

maalcari
19-01-2011, 08:14 PM
Hi Tom,

Do you have any setup for very high grip indoor carpet ? A little less grip than Petit 2011.. but not much less :)

Thanks.

Greetings from Portugal.

Adam F
20-01-2011, 08:00 AM
Thanks Tom, much appreciated!

bigred5765
20-01-2011, 04:46 PM
thanks bill. My x6 still has the wheely problem.. For what ever reason i lost a second a lap this week.. I am going back to a non boosted profile on my speed passion. Who would think that these 13.5 could be so powerfull. I like to pull full trigger so ill need to detune the power plant! LOL

Cougar in the house hope to have it rolling for wed nite...

have you tried putting some negative throttle curve on your transmitter it could help with the wheely problem as it might have to much power at the bottom end

TKG26
20-01-2011, 06:24 PM
Ran the cougar for the first time last nite. IT was a dream, it did everything very well. And my wheely issues are no longer. I think a milder ESC boost profile and a slight slip on the slipper helped.

Chris119
21-01-2011, 02:51 AM
I must say Team Schumy looked pretty hooked up last night. I also must say you just cost me a bundle since I ordered up a couple for myself :D I hope they work as good as they look.
PS what set up?
Do I need springs, Swaybars?

FRONTI3R
28-01-2011, 07:03 PM
Can't wait to try mine out this weekend.

scoyle
31-01-2011, 05:42 PM
I am looking at getting back into off-road this season having spent about the last eight years with the tarmac boys... the track that I will be racing at is basically half an 8th scale track and is a mixture of grass and hard dirt were the grass has worn away.

Do any of the setups on the Schumacher site fit in with this description or could someone point me in the direction of a starting setup especially tyres/inserts.

Appreciated...

Pownabown
16-02-2011, 10:42 AM
Can any of the Schumacher Team give me a
generall ride height from floor to chassis for running outdoor astro tracks.

As dont think ive seen any ride height measurements on setup sheets.
Cheers guys

Cockerill
16-02-2011, 10:47 AM
Personally I start with about 21-23mm front and rear.

Pownabown
16-02-2011, 10:49 AM
Cheers Tom just what i needed thanks

TKG26
16-02-2011, 01:02 PM
Carpet question... On tight indoor tracks do you guys typically reduce motor, or ESC profiles or do you play with the slipper to control wheelies? Our indoor track switched from Dirt to Carpet and lost a bit of straight, so its fairly small. About a 15second lap...

The biggest thing i noticed with the switch over is where i used to run almost full boost on dirt i find im turning it off to keep the nose of the car down. With so much rear grip the cars push...

I know too much power is a good problem to have :) Never thought that we would be turning down 13.5 motors to go faster.

Bill i will try the neg throttle curve tonight..... So far i tossed a bigger pinion at the motor and reduced the boost to off.. Damn 2year old Losi motor still has rip, im sure not great for onroad but for buggy its been amazing.. Do brushless ever die? LOL

moth898
16-02-2011, 01:52 PM
I'm running a 6.5 speed passions in the car and I can't lift the front...your doing it wit a 13.5...wow. leave the negative throttle alone, I tried it and made the car hard to control in the turns.

Whats your setup like?

check your ride height first, I run with the drive shafts slightly lower than level, then level the chassis to the front.

What spur are you running. Play with the slipper first and if that doesn't work add the weight. And if all else fails install the +8 mm chassis...makes the care easier to drive.

TKG26
16-02-2011, 01:55 PM
im going to run a new setup tonight, i tried another cougar last week and his powerband was way down but it was very fast, With such a tight layout there is not much trigger time so you have to baby the throttle input or you wheelie past the apex. Last week i had to play with about 1/4 throttle or i would push..

You need to come up again and try it out. ITs very fun but its amazing how little power is needed to go fast..

moth898
16-02-2011, 03:26 PM
I will definately come out again soon but with my track also open wednesday's and a 2 1/2 hour drive going and comming its real hard. I'll try for next week, let you try my car out too.

reg
17-02-2011, 08:43 PM
Hi,
could you let me know what setup changes are made when you switch to the 8mm longer chassis,i run on high grip carpet and also high grip carpet with slippy wood,

hazeandfizz
17-02-2011, 09:22 PM
Reg,

Not sure who your question is to but for me I didn't change the setup when going +8. It just calms the car down making it easier to drive, it has had a huge effect on my results as I'm making far fewer mistakes.

James.

Hi,
could you let me know what setup changes are made when you switch to the 8mm longer chassis,i run on high grip carpet and also high grip carpet with slippy wood,

reg
17-02-2011, 09:34 PM
Reg,

Not sure who your question is to but for me I didn't change the setup when going +8. It just calms the car down making it easier to drive, it has had a huge effect on my results as I'm making far fewer mistakes.

James.


Thanks hazeandfizz,it was to everyone who has gone to it,

moth898
17-02-2011, 10:01 PM
same here, no set up changes. It made the car easier to drive.

mikeyscott
20-02-2011, 06:39 PM
Reg,

Not sure who your question is to but for me I didn't change the setup when going +8. It just calms the car down making it easier to drive, it has had a huge effect on my results as I'm making far fewer mistakes.

James.

May have to bit the bullet and get one.

Robocop
20-02-2011, 07:40 PM
Ordered mine today

eichkay
21-02-2011, 10:36 AM
Hi,
could you let me know what setup changes are made when you switch to the 8mm longer chassis,i run on high grip carpet and also high grip carpet with slippy wood,

I run in a loose clay track in australia and going to +8 chassis i had to do a few changes to get some steering back into the car as i found myself understeering possibly due to less weight over the front wheels

I ended up flipping the front arms back to stock, lower 4mm front tower, brought anti squat back to stock setting and shortened the rear wheel base..

hazeandfizz
21-02-2011, 01:36 PM
Mikey.

I've run the chassis at my last 3 Winter Series outings and have finished a clear final higher than normal. Some of the guys I've never beaten before are now behind me on the grid! I'm carrying more speed and making far fewer errors.

Only time it didn't help was on a very tight/slow club night track.

Cheers,
James.

May have to bit the bullet and get one.

Gareth Jones
21-02-2011, 03:47 PM
Mikey.

I've run the chassis at my last 3 Winter Series outings and have finished a clear heat higher than normal. Some of the guys I've never beaten before are now behind me on the grid! I'm carrying more speed and making far fewer errors.

Only time it didn't help was on a very tight/slow club night track.

Cheers,
James.

Far fewer errors.....? I think i have only ever seen you crash about twice when racing against you! and thats normally when trying to avoid my car :P

Danny McGee
21-02-2011, 05:53 PM
See, we did try and tell you that it makes the car easier to drive :). Thats the reason i wanted to give it a try again when i joined the team. I drive differently the rest of the guys so wanted to see if it helped me, and it did.

Glad to hear its making the difference to some guys. We have more things we want to test and try to make the car even better, so the season looks like it may be a good one.

Looking forward to giving the new 4wd a run at Maritime this weekend too :)

cmgreen
19-03-2011, 04:20 PM
What setup is a very good base for running indoors e.g. worksop??

Also what pistons are used? geah ones?

simoncrabb
19-03-2011, 07:28 PM
I'm looking for a good base setup on high grip astro for the long chassis car.

I've got mine built with saddles, but it's not right yet, needs more front end. I'm thinknig weight under the electronics, flip front arms back round to stock, short wheelbase rear end.

Or, should I just use a stick pack layout?

Or, even, should I try a Losi 22 style saddle layout?

rc boy
21-03-2011, 09:49 PM
i would try adding some weight in the front and swapping the front wishbones back round and just go from there

hazeandfizz
22-03-2011, 10:29 AM
Simon,

If it's dry I think stick pack would be the way forward, in the wet saddles should give you the extra traction.

That's what I'm going to try:thumbsup:.

James.

I'm looking for a good base setup on high grip astro for the long chassis car.

I've got mine built with saddles, but it's not right yet, needs more front end. I'm thinknig weight under the electronics, flip front arms back round to stock, short wheelbase rear end.

Or, should I just use a stick pack layout?

Or, even, should I try a Losi 22 style saddle layout?

cornishboy176
03-04-2011, 07:57 PM
Hi has anyone got a set up for grass please a little bumpy with jumps,The front is digging in halfway thru the corner?

Rough Set up atm

Fr 35wt kit springs 4 hole pistons
Rr 35wt kit springs 5 hole pistons

Staggered ribs Fr
Sch mini spike 2 Rr

Thanks

jcb
09-04-2011, 10:51 AM
Hi has anyone got a set up for grass please a little bumpy with jumps,The front is digging in halfway thru the corner?

Rough Set up atm

Fr 35wt kit springs 4 hole pistons
Rr 35wt kit springs 5 hole pistons

Staggered ribs Fr
Sch mini spike 2 Rr

Thanks



I'm using the following at the moment:

Front:
Oil: 40wt
Piston: 5 hole
Spring: 4.5
Middle on tower and inside on wishbone
Camber Link: 50.5 and outside on hub
5 Degree Hubs

Rear:
Oil: 30wt
Piston: 6 hole
Spring: 2.0
Middle on tower and inside on wishbone
Camber Link: Kit and middle on hub
Long wheel base

Trish
09-04-2011, 02:31 PM
Hello,

I run 3 hole pistons in the cougar.

on Grass I would run.

Short wheel base on the rear hub and front wishbones flipped.

Front
3 hole pistons with 40 wt and kit 3.5 spring
Middle on tower (add 2mm of droop by unscrewing ball stud if you run the standard tower)



Rear
3 hole piston drilled to 1.65mm holes on inner hole on tower with 2.5 spring.
rear shock bottom unscrewed 1.5mm on inner hole on wishbone.

Hope that helps for a start.

hazeandfizz
11-04-2011, 09:22 AM
What starting setup are people going to run this weekend at Stotfold if it's dry:thumbsup:?

Thanks,
James.

Swiss
11-04-2011, 11:07 AM
James

I would run exactly how you finished with it at Silverstone this weekend. I didn't change a great deal from my Stotfold set up to run at Silverstone on Sunday.

Paul Timberlake


What starting setup are people going to run this weekend at Stotfold if it's dry:thumbsup:?

Thanks,
James.

Cockerill
26-04-2011, 08:22 PM
My setup from Stotfold national is here:

http://www.racing-cars.com/images/Technical_Info/Schumacher/Current%20Cars/Cougar%20SV/Set%20Up%20Sheets/Cougar_sv_Tom_stotfold.pdf

Any questions just ask :thumbsup:

mikeyscott
26-04-2011, 08:45 PM
45w & 60w oil, did I read that right?

Cockerill
26-04-2011, 08:48 PM
45w & 60w oil, did I read that right?

Yup, Schumacher Oil, equivalent Losi is 35 & 45.

mikeyscott
26-04-2011, 08:50 PM
Ok thanks. Just wish they'd all use the certified method, I.e. Cst ratings...

Cockerill
26-04-2011, 08:56 PM
So do I, but even Cst labelled oil is not all the same :thumbdown:

A comparison of Losi to Schumacher is:

Losi to Sch
20 = 20
25 = 25
27.5 = 30
30 = 35
32.5 = 40
35 = 45
37.5 = 50
40 = 55
45 = 60

mikeyscott
26-04-2011, 08:59 PM
So do I, but even Cst labelled oil is not all the same :thumbdown:

A comparison of Losi to Schumacher is:

Losi to Sch
20 = 20
25 = 25
27.5 = 30
30 = 35
32.5 = 40
35 = 45
37.5 = 50
40 = 55
45 = 60

Cheers for the table. I run 37.5 and you gotta be kidding if it's 50w

Man that sucks, speak to your boss! Lol!

Cockerill
26-04-2011, 09:02 PM
The two brands simply use a different scale to label their oil, neither company is right or wrong.

MattW
26-04-2011, 09:05 PM
Shock oil is a mine field - always has been. Throw in a couple of other companies that measure in "wt" and i'd bet you'd end up with 2 more varients.

As Tom says, even amongst companies that use CST - they don't compare as you'd expect to.

eichkay
27-04-2011, 03:06 AM
So do I, but even Cst labelled oil is not all the same :thumbdown:

A comparison of Losi to Schumacher is:

Losi to Sch
20 = 20
25 = 25
27.5 = 30
30 = 35
32.5 = 40
35 = 45
37.5 = 50
40 = 55
45 = 60


Good to know, i think ill be getting some 50-55 and 60 this week..

ikey ji
28-04-2011, 06:13 AM
Thanks Tom for the info (and congrats for your Neo RAce...;)) ! And about AE oil compared to Schumacher ones?

By the way, i'm posting my dirt/clay setup from French 2nd National (B Main finisher over 50 entries) which was closed to the winner. It is mainly based on Cockerill Euro 2010 setup...

http://www.petitrc.com/setup/schumacher/setupcougarsv/CougarSV_ChrisRan_VicLaGardiole2011040910/index.html

hazeandfizz
01-05-2011, 08:32 PM
Having never raced at RHR what changes do you top guys make to setup between tracks?

Thanks,
James.

Adam F
02-05-2011, 08:12 AM
So do I, but even Cst labelled oil is not all the same :thumbdown:

A comparison of Losi to Schumacher is:

Losi to Sch
20 = 20
25 = 25
27.5 = 30
30 = 35
32.5 = 40
35 = 45
37.5 = 50
40 = 55
45 = 60

Tom, can I take it that you quote Schumacher oil figures when you post your set ups?

Cockerill
02-05-2011, 11:59 AM
And about AE oil compared to Schumacher ones?

I'm not sure on AE to Schumacher, I'm told there is 2.5 between Losi & AE but I'm not sure which way it is.

Having never raced at RHR what changes do you top guys make to setup between tracks?

Thanks,
James.

I plan on starting with my setup from Stotfold. RHR has a few bits of new astro which are quite different to what was there before so old setup's might not be as good. If you need any help at the national feel free to come over and ask.

Tom, can I take it that you quote Schumacher oil figures when you post your set ups?

The only setup on the Schumacher site that has Schumacher oils listed is the 2011 Stotfold setup, all others from me are the Losi wts. I now quote both to make it easy to understand and compare.

jcb
03-05-2011, 10:38 PM
I'm still in search of some more rear end grip for racing on a dusty grass track. Car is nicely balanced with the following setup but lacks a considerably amount of forwards drive.

Rear:
6 hole piston
30 wt - losi oil
2.0 spring
middle hole on tower and inside on wishbone

4 degree strap
3mm of anti squat washers on the 4.5degree block

39mm rear camber plate with spacer underneath and no washers under ball stud, mounted on middle hole on hub

medium wheel base


Front:
5 Hole piston
40 wt - losi oil
4.5 spring
middle on shock tower, inside on wishbone

50.5mm camber plate with 3mm or washers under ball stud, mounted on outside of hub



Other:
Low diff,
8mm chassis
21mm rear ride height, 22mm front ride height
75 grams weight under chassis (located from rear of chassis to mid battery position, down centre)




I have considered trying a high diff and short wheel base, any other suggestions are more than welcome.

moth898
03-05-2011, 10:48 PM
I have about the same setup except I use the saddle pack setup, It gave alot of forward grip.

mikeyscott
07-05-2011, 06:16 AM
How much weight are people adding? Already got various trishbits weight but also looking at rudebits under lipo weight etc

simoncrabb
07-05-2011, 10:22 AM
How much weight are people adding? Already got various trishbits weight but also looking at rudebits under lipo weight etc

Depends on LiPos... Some are heavier (and thicker) than others...

Looking at Tom's lipo, and rudebits weight, I'm guessing he was running around 350g of lipo and brass underneath it...

Which means, if I run my saddles in stick formation, I'm some 60g lighter, and they're too fat to get any weight under them...

Look at that, etc.

Cockerill
09-05-2011, 10:21 AM
I'm running quite a bit this year to make my car easier to drive. I've got approximately 40-50g in/around the front, 90g RudeBits Weight under the Lipo and Trish's weight in front of the motor.

However, last year I ran pretty much none, with my car just over the weight limit. So that shows either can work and it's all down to personal preference, so don't feel that the car 'needs' extra weights to perform, they are just options :thumbsup:

mikeyscott
09-05-2011, 10:23 AM
In theeory making it easier / safer to drive?

jonathan may
09-05-2011, 05:40 PM
i have the under servo and the trish motor weight on the sv at the moment what under lipo weight should i start with a lite or heavy one.
i think the rudebits ones goe 52g , 66g , 82g

josh.jenner1
27-05-2011, 04:39 PM
theres now the new 90g rudebits lipo weight aswell, you can only try it and see how its feels with the extra weight mate, im also looking into getting one so know what you mean do i go for the lighter or heavier its a thinker

Raul Garcia
28-05-2011, 02:12 PM
I'm still in search of some more rear end grip for racing on a dusty grass track. Car is nicely balanced with the following setup but lacks a considerably amount of forwards drive.

Rear:
6 hole piston
30 wt - losi oil
2.0 spring
middle hole on tower and inside on wishbone

4 degree strap
3mm of anti squat washers on the 4.5degree block

39mm rear camber plate with spacer underneath and no washers under ball stud, mounted on middle hole on hub

medium wheel base


Front:
5 Hole piston
40 wt - losi oil
4.5 spring
middle on shock tower, inside on wishbone

50.5mm camber plate with 3mm or washers under ball stud, mounted on outside of hub



Other:
Low diff,
8mm chassis
21mm rear ride height, 22mm front ride height
75 grams weight under chassis (located from rear of chassis to mid battery position, down centre)




I have considered trying a high diff and short wheel base, any other suggestions are more than welcome.
Adding more spacing under the rear camber plate will not only increase your sidebite, but also increase your foward grip. On my car, I ran the normal plastic spacer(2mm)added a 2mm spacer and left the 1mm under the ballstud. I also modded the camber plate to match the hole for the SXII stock plate. It would be easier just to install the SXII camber plate. That made the ball stud more inboard and more linear to the driveline. Also a improvement. Also remove the anti-squat shims to increase the foward drive. I liked -4.5 antisquat for every track I ran on.

Like Tom, I too run considerable weight on my chassis.
I use 3/4 oz under the front bulkhead in all of the moulding holes,
1/2 oz on each side of the battery behind the servo, 1 oz in front of the mtr, 1/4 oz under the pinion, 1/4 oz in front and rear of the diff inside the transmission, and 1/4 oz ontop of the rear toe strap. I also used the alloy trans housing, steel layshaft,and steel outer gears. All of my testing is on dirt, med-high clay surface. If anyone needs help just ask.

Tom, good job at the warmups BTW.

wes j.
28-05-2011, 08:30 PM
I had the same problem racing on worn grass with lack of rear end grip. I went from a long to a short wheel base and seemed to get bags more grip. A fellow SV driver also done this and couldn't believe the difference it made.

Raul Garcia
28-05-2011, 09:30 PM
I had the same problem racing on worn grass with lack of rear end grip. I went from a long to a short wheel base and seemed to get bags more grip. A fellow SV driver also done this and couldn't believe the difference it made.
I never ran anything but a ultra short wheelbase. I shaved the shoulders off the rear arm front mount, and spaced the arm foward, then shaved the rear hub, and spaced that foward. Then I flipped the front arms, and shimmed the castor block foward.

The Doctor
29-05-2011, 07:42 AM
I had the same problem racing on worn grass with lack of rear end grip. I went from a long to a short wheel base and seemed to get bags more grip. A fellow SV driver also done this and couldn't believe the difference it made.

I also tried this recently with the same result. A fellow SV driver at the same meeting did the same but unfortunately didn't finish the race meeting because his outdrives were so worn that he snapped a driveshaft...!

bat
30-05-2011, 10:42 AM
please, help with setup.
I race on a loose clay track, very bumpy quite narrow with the average number of jumps. Jumps and rollovers are covered with carpeting.
I'm currently using the standard setup for the clay from the last page of the manual.
The car runs great even at high speed on the straight and wide curves is clearly faster than the B4 and TRF201. jumps, beats with no problems and very forgiving mistakes.

problem arises when I need to start or at low speeds especially on a loose track.
Then the car starts to complain that the rear slides, turns in a fairly uncontrolled way. even slight acceleration causes the slippage.
change tires or change the settings for the clutch and nothing helped.

Thomas B
30-05-2011, 03:02 PM
Did a race this weekend on a bumpy clay track. The Swedish cup in Årsunda.


Had the +8 mm chassi
Rewersed front wishbones
Rear wishbones moved forvard 2,5 mm
Narrow rear end by removing the purple washer at the weels
Oval holes in top.deck for more flex
Front Shocks, 4 piston, 27,5 wt ass oil and 3,0 spring.
Rear Shocks, 5 piston, 25 wt ass oil and 1,6 spring.
1,5 mm antisquat washers

1680 grams total weight.

Stick pack lipo.

The car was great, i qualified 17 and won the first B-final. In the A-finals the top 2 had the Cougar SV. A great result and a big win for the Cougar SV. Dont know the exakt setup on the Cougars that was on the podium but i think it was similar.

Cosworth
30-05-2011, 11:11 PM
Doing a grass race soon (my first with this buggy) and can't find any setups? Could anybody help me out with one please?

Also what advantages/disadvantages do you get from running the shocks at the back? I ask this purely because i'd rather the easy access to the slipper.

conrero
03-06-2011, 09:53 AM
Hello, I am an Italian driver and sponsor SPEEDPASSION SCHUMACHER we tested the cougar sv slippery in the land .. with the frame that is shorter than the basic I put a 30 losi front plates for 4 horns and central location on the inside in the wings ... 27.5 losi rear plates from 5 central location on the horns on the arms internal ee ... rear shocks facing the front ... the front arm shot ... ... topdeck average 6.5T engine speedpassion v3 ... regulator speedpassion gt 2.0 per 5300 speedpassion .... batteries .... schumaher now passed me by 8 mm along the frame now I'll try and tell you how it will land on the slippery ...... if you want to visit the track on our forum: www.mcrae.forumfree.it

Chris Ashton
10-06-2011, 12:28 PM
Tom's worlds warm up set up now on line - www.racing-cars.com (http://www.racing-cars.com)

lochness42
10-06-2011, 12:39 PM
I'm missing some specific informations such as which chassis and top deck he used, leads and such or did he ran box stock car?

conrero
18-06-2011, 05:55 AM
I used the original box and the frame average topdek

jaywestwood
24-06-2011, 11:35 AM
Has anyone tried the Puma bodyshell yet??? If so was it any good??? and diff in feel on track???

Thanks

dbizzle5
24-06-2011, 12:58 PM
Ive noticed at Talywain and Kiddy that some of the team were running the saddle pack chassis with shocks on the back even in dry aswell as the wet. Was just wondering whats the thought behind this and can some of the team post there setups in this configuration as wouldnt mind trying it.

cheers