PDA

View Full Version : Cougar - What motors are people running?


mikeyscott
02-05-2010, 06:31 PM
Just interested as to what people are running and what wind etc.

Looking at an 8.5 or 7.5 for my SV. Got the 8.5 already

sime46
02-05-2010, 06:34 PM
6.5 sp,v3. Thats in mine. :thumbsup:

ian h
02-05-2010, 06:36 PM
I'm thinking 7.5 for mine, should be enough for me on our track.

Jonesy
02-05-2010, 07:53 PM
6.5 SPv3 at the min although it's about to drop to a 7.5 for Blyth National, 6.5 is a struggle with my thumbs at the min, still driving the car as if there is a motor hanging out the back of it!!

mw02veg
02-05-2010, 08:02 PM
7.5 with a 12mm rotor.

chatts#725
02-05-2010, 08:12 PM
novak 6.5 light in mine

bigred5765
02-05-2010, 08:14 PM
6.5 v3

mikeyscott
02-05-2010, 09:17 PM
Think I will go with my v3 8.5. Will change the spur to get the right fdr for the motor 80 or 81 I expect

Timee80
02-05-2010, 09:27 PM
7.5t ballistic for me i think

kwiksi
02-05-2010, 11:47 PM
Speed Passion 9.5 V3...as soon as it crosses the pond.

Raul Garcia
03-05-2010, 12:31 AM
Speed Passion V3 10.5 here....

Michiel H.
03-05-2010, 06:18 AM
17.5 V3.

i'm not a very good driver yet, track isn't large.

But looking at the gearing i might be in trouble, any 72T spur or so fit from other brand?

pfree
18-05-2010, 12:37 PM
Has anyone had a problem with the motor panel hitting the battery holder housing? I just can't get my SP V2 club motor to fit! Looks like I will have to buy a new V£ at more expense!

bigred5765
18-05-2010, 12:58 PM
or remove the two posts??

ian h
18-05-2010, 01:00 PM
7.5t ballistic for me i think

This is what I'm using with 23/78 gearing, nice and cool!

eichkay
18-05-2010, 01:58 PM
Ive currently got a 8.5 Tekin in mine on a SPX lrp esc...seems to have good pace at my local.. but its loose clay.

mikeyscott
18-05-2010, 03:36 PM
People using RW spurs?

I am on a 79 / 27 with 8.5 v3 but have a 78 - 83 in my box

Swiss
18-05-2010, 05:30 PM
Running Schumacher Spurs, never had a problem with the original ones, or version 2. Running 24/83 on a 6.5 Tekin Redline.

Paul

mikeyscott
18-05-2010, 05:34 PM
I'm RW during the size so I can get a better FDR on my 8.5

ian h
18-05-2010, 05:36 PM
People using RW spurs?

I am on a 79 / 27 with 8.5 v3 but have a 78 - 83 in my box

Yep they are sweet! As I said earlier running the 78/23 on a 7.5 ballistic

snej
18-05-2010, 06:46 PM
i´m running a 21,5 T graupner for the german stock class. at the moment with 28/78.

mikeyscott
31-05-2010, 03:31 PM
My 8.5 got pretty hot yesterday on a 78/28 I assume I'm under geared then?

JustARcFan
31-05-2010, 03:38 PM
My 8.5 is cold with a 78 spur / 26 pinion

My 8.5 got pretty hot yesterday on a 78/28 I assume I'm under geared then?

mikeyscott
31-05-2010, 03:40 PM
My 8.5 is cold with a 78 spur / 26 pinion

Mmm ok odd. Have you cut some holes in the shell at all?

JustARcFan
31-05-2010, 03:42 PM
1 big hole at the motor side

mikeyscott
31-05-2010, 03:43 PM
1 big hole at the motor side

Need to look at doing this then too :( Get a nice shell and then cut holes in it :thumbdown:

JustARcFan
31-05-2010, 03:50 PM
If you do it with a body reamer it doesn't look bad at all.

Need to look at doing this then too :( Get a nice shell and then cut holes in it :thumbdown:

mikeyscott
31-05-2010, 03:57 PM
If you do it with a body reamer it doesn't look bad at all.

Yup that's what I'll do

Aran
31-05-2010, 04:04 PM
Can't you cut 1mm or 2mm rectangle out and have them like a grille, then heat them up and curve them in a bit.

Simular to how F1 cars used to be. I reckon that would look cool :D
Like this here (http://s2.desktopmachine.com/pics/Ferrari_612_241_1024x768.jpg)

mdb_75
31-05-2010, 05:00 PM
Go down to a 26T pinion too, I'd say your 7.2:1 fdr is overgeared. with a 26T you'll be 7.8:1 which should be better for your temps.

Personally though I'd say even that's getting towards overgeared for offroad and would use a 24/25T max unless you have lots of long straights? :confused:

mikeyscott
31-05-2010, 05:08 PM
Go down to a 26T pinion too, I'd say your 7.2:1 fdr is overgeared. with a 26T you'll be 7.8:1 which should be better for your temps.

Personally though I'd say even that's getting towards overgeared for offroad and would use a 24/25T max unless you have lots of long straights? :confused:

Got a few on the power sections..

http://www.torchracing.org.uk/gallery.php

Tempted to change the gear to what you've suggested, but also try a 7.5 V3 or look at a 12.3 rotor.

mdb_75
31-05-2010, 05:14 PM
With a 7.5 you'd have to go to a smaller pinion again.

mikeyscott
31-05-2010, 05:15 PM
With a 7.5 you'd have to go to a smaller pinion again.

Yeah that's not a problem. I have 78 - 83 spurs in my box so can adjust as required

mdb_75
31-05-2010, 05:18 PM
That looks a good track Mikey! Plenty of tight twisty bits too! You'll have to find out what gearing others are using with similar motors to yours at your track to see if you're way out or not, but I'd say you need to drop 2 or 3 teeth at least.

mikeyscott
31-05-2010, 05:23 PM
That looks a good track Mikey! Plenty of tight twisty bits too! You'll have to find out what gearing others are using with similar motors to yours at your track to see if you're way out or not, but I'd say you need to drop 2 or 3 teeth at least.

Thanks, it's a bit narrow in places, but we'll be sorting that out.

We had Grant and co down at the weekend for an awesome day.

Wondering if I'm just on the power too much for the motor. I'm not wanting to sell it as I want it for Petit if it's on next year.

Based on the FDR calculations I could also look at 82/25 which will give a 8.53 FDR

ian h
31-05-2010, 05:40 PM
Thanks, it's a bit narrow in places, but we'll be sorting that out.

We had Grant and co down at the weekend for an awesome day.

Wondering if I'm just on the power too much for the motor. I'm not wanting to sell it as I want it for Petit if it's on next year.

Based on the FDR calculations I could also look at 82/25 which will give a 8.53 FDR
Thats some difference to the 7.2 your running now. I'm running 23/78 on a 7.5 which seems ok on our grass track. I would say that 25/78 would be more like it for the 8.5.

mikeyscott
31-05-2010, 05:45 PM
Thats some difference to the 7.2 your running now. I'm running 23/78 on a 7.5 which seems ok on our grass track. I would say that 25/78 would be more like it for the 8.5.

I was originally going by the recommend FDR chart on the speed passion manual. I'm crap at guaging FDR

23/78 is 8.82

25/78 is 8.11

I'll get things changed and experimented with this week.

gazhillAE
31-05-2010, 07:59 PM
Speed passion V3 6.5t
80t
22

mikeyscott
31-05-2010, 08:03 PM
So what FDR would you look for in a 8.5 / 7.5 as you can achieve similar FDR with different spur and pinion combinations etc.

whjdm069
01-06-2010, 03:03 AM
does any one know where I can purchase a smaller spur for the cougar?

mikeyscott
01-06-2010, 06:44 AM
does any one know where I can purchase a smaller spur for the cougar?

RW Racing

Aran
03-06-2010, 12:37 AM
dont suppose anyone knows what spur to get for a 10.5 turn.

got the stock one and it will only fit a 22t pinion :/

ian h
03-06-2010, 01:19 AM
dont suppose anyone knows what spur to get for a 10.5 turn.

got the stock one and it will only fit a 22t pinion :/
I would get the 78.

Aran
03-06-2010, 02:20 AM
okay ill give that a try, thanks mate