View Full Version : Cougar slipper adjustment...
simoncrabb
03-05-2010, 11:51 AM
Is there an easy way to adjust the slipper, I can't get a box wrench tool in there with the shock on...
Do I need to cut the plastic cover down so I can use a 5.5mm spanner? But leave enough material on so the rubber cover goes back on?
niggs98
03-05-2010, 11:56 AM
in a word yes
simoncrabb
03-05-2010, 12:48 PM
Cool, where's me dremel?
Jonesy
03-05-2010, 02:59 PM
Is there an easy way to adjust the slipper, I can't get a box wrench tool in there with the shock on...
Do I need to cut the plastic cover down so I can use a 5.5mm spanner? But leave enough material on so the rubber cover goes back on?
As Nathan said that is the way to do it!! We've cut off the end of the cover and once this is done it is easy to get at it with the smaller spanner
Tom3012
03-05-2010, 09:18 PM
Any pics ?
bigred5765
03-05-2010, 10:24 PM
here you go
first pic is cap of un cut:woot:
second pic is cut:woot:
third is cap back on but not all the way on:o
as you can see in the second pic its easier to get at the nut even if the shock and drive shaft are in place
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.