View Full Version : What servo are you using on your Cougar?
Hi
As a first time kit builder I'm just getting everything ordered which I need to complete the kit. Can anyone suggest a suitable servo, there seems to be so many I'm abit lost.
Thanks
Timee80
04-05-2010, 10:31 PM
most people wouldnt argue against a savox. Try either the 1257 or 1258. Both are good servo's
Jonesy
04-05-2010, 11:54 PM
I'd recommend any of the GM Servos here:
http://www.racing-cars.com/sp/category/Manufacturer/subcategory/GM_Racing/templateid/12/searchbox7/Electronics.html
mw02veg
05-05-2010, 09:13 AM
gm servos are ace cheap and fast :thumbsup:
Jonesy
05-05-2010, 11:59 AM
gm servos are ace cheap and fast :thumbsup:
AMEN!
Itie RC
05-05-2010, 12:19 PM
Has anyone tried a savox 1256?
bigred5765
05-05-2010, 12:58 PM
why the heck would you need a 20kg servo in a 2wd.thats really 1/8th teratory
mikeyscott
05-05-2010, 01:32 PM
Sanwa (#ERG-WZ) Digital ERG-WZ Servo currently in the Cougar, was going to be a Savox 1258, but it's in my mate Cat SX.. Must reclaim it...
Savox servos are very nice. 1257 in my Cat SX
gm servos are ace cheap and fast :thumbsup:
Any particular model?
kennyrc
05-05-2010, 02:09 PM
I'd recommend any of the GM Servos here:
http://www.racing-cars.com/sp/category/Manufacturer/subcategory/GM_Racing/templateid/12/searchbox7/Electronics.html
Which servo horns (number of spines) fit the GM servo's??
andyc
05-05-2010, 07:17 PM
Try this
http://www.skylinemodels.co.uk/Links/xcart/product.php?productid=83718&cat=368&page=1
Fredrik Jarl
05-05-2010, 07:40 PM
futaba bls451 curently in my cougar =)
jim76
05-05-2010, 07:53 PM
I'd recommend any of the GM Servos here:
http://www.racing-cars.com/sp/category/Manufacturer/subcategory/GM_Racing/templateid/12/searchbox7/Electronics.html
any particular one? The 808 looks the pick, or maybe the 807? Think the 806 would be overkill on the torque!!
bigred5765
05-05-2010, 08:02 PM
were running a savox at the minuet but its soon to be replaced with a 808 me thinks
old jonesy
06-05-2010, 05:42 AM
any particular one? The 808 looks the pick, or maybe the 807? Think the 806 would be overkill on the torque!!
The 808 (GM7954) is the one Andy uses
ulrich
06-05-2010, 05:49 AM
Using the Savox 1251 in both the Cougar and CAT
Timee80
06-05-2010, 07:40 AM
Just looked at the spec on the 808. 0.04s , crikey moses!!
stefke
06-05-2010, 09:23 AM
I'm using an GM (Graupner actually) 807 in my Cougar and it's a very good servo for the £, but I'm having a hard time believing those numbers mentioned on the site. :).
jim76
06-05-2010, 02:11 PM
the speed quoted if for 40deg turn, where as most sevros quote based on 60deg turn.
still, 0.04sec/40deg is the same as 0.06sec/60deg, so still damn fast!!!
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.