View Full Version : Weight of your TRF511?
Hello!
What weight has your Tamiya TRF511 cars? Mine was 1750g, I think what it's too much.
Thanks
fastinfastout
09-05-2010, 04:57 PM
1750grams?:o
what gear are you running?
I had my 501x at 1620 grams
I'm running Speed Passion GT 2.0 ESC and V3 motor, Intellect 5200mah 45c lipo, Ko Propo 2413 servo, Spektrum micro receiver, MRT transponder, and of the heavy option parts I has Fredriks Diff covers, Aluminium rear hubs and front caster blocks. Losi wheels with JC tyres.
AJ Roberts
09-05-2010, 05:23 PM
I wonder whats lighter?? a DB01R or a TRF511, depends alot on the battery pack you are running:eh?:
AJ Roberts
09-05-2010, 05:28 PM
I wonder whats lighter?? a DB01R or a TRF511, depends alot on the battery pack you are running:eh?:
My DB01R is 1640g
Jan Larsen
09-05-2010, 05:29 PM
1630g with IB4200 lipos.
IP 5200 weigh 279g, IP 4200 weigh 233g.
Fredrik Emilsson
09-05-2010, 06:57 PM
Ok, itīs heavy. But how is she on the track?
Had my 501X WE at 1800 grams (with Nimh batteries), worked just fine.
My 511 weighs 1680 with:
IB5200 cells
Novak Ballistic
LRP SXX TC (without cooling fan)
Futaba 9550 servo
Transponder
Spektrum receiver
Relux wheels with Holeshot tires
alu caster block
alu hub rear
My LiPo trays (approx 7 grams)
My Long rear diff cover (approx 14 grams)
My Short front diff cover (appox 7 grams)
511 body and undertray + wing.
Other than that standard (high traction arms etc). No titanium or alu screws.
Piman
09-05-2010, 08:35 PM
Mines 1645g with the alloy front and rear hubs, alloy steering rack and LRP lipos. No added weight & balanced over the jumps.
James
Ok, itīs heavy. But how is she on the track?
Had my 501X WE at 1800 grams (with Nimh batteries), worked just fine.
My 511 weighs 1680 with:
IB5200 cells
Novak Ballistic
LRP SXX TC (without cooling fan)
Futaba 9550 servo
Transponder
Spektrum receiver
Relux wheels with Holeshot tires
alu caster block
alu hub rear
My LiPo trays (approx 7 grams)
My Long rear diff cover (approx 14 grams)
My Short front diff cover (appox 7 grams)
511 body and undertray + wing.
Other than that standard (high traction arms etc). No titanium or alu screws.
Mine car worked fine too :) I think that if the car will have smaller weight (at least 1700 or less) it will works even better.
By my car there is other screws - Square, not titanium.
The Speed Passion is heavier than LRP SXX, but not much more.
Lee Martin
10-05-2010, 08:56 AM
My car weighs 1620.
With added Rudebits weights in centre - Freds lipo tray and diff covers and Speed Power lipos.
;)
Rich D
22-05-2010, 03:19 PM
Using Fredriks template
My 511 weighs 1568 currently with:
Speedpower 4200 Lipo
Speed Passion 5.5R
LRP SXX TC (with cooling fan)
KO 2413 servo
Transponder
KO 302F Receiver
Std wheels with Schumacher tires and inserts
alu caster block
alu hub rear
full alu steering parts
Rudebits Lipo Tray with 2 parts fitted in the centre
Full Titanium Screws, Ballstuds and Turnbuckles
Ceramic diff balls front and rear
Fredriks short rear diff cover
511 body and cut undertray + wing.
Chassis tape on underside
Going to add weight to make it up to 1590 ish for minimum weight :thumbsup:
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.