PDA

View Full Version : CR2 Rear Hubs

ashleyb4
11-05-2010, 10:58 PM
HI Guys

Gave the Cr2 a clean ive been running the 0 degree rear hubs since the indoor finals (well the indoor thing at worksop) but ive run them with the turnbuckles quiet angled today i thought why not just switch them round and put left on right and right on left like the below picture is there any problems with that???


http://img32.imageshack.us/img32/7683/dscf4030.jpg (http://img32.imageshack.us/i/dscf4030.jpg/)

Uploaded with ImageShack.us[

[URL=http://img708.imageshack.us/i/dscf4029x.jpg/]http://img708.imageshack.us/img708/2802/dscf4029x.jpg (http://imageshack.us)

Uploaded with ImageShack.us (http://imageshack.us)

A
j.m.
12-05-2010, 03:46 AM
Your car's going to explode halfway through the first lap.







:woot: Looks like they were supposed to be run that way! Unless there are shock-clearance issues.

Jon
ashleyb4
12-05-2010, 11:23 PM
Your car's going to explode halfway through the first lap.

O god ill change them back now ...


No they are labelled left and right and they are not designed for the car. Just wondering if there is geometrical diffrence???

A
j.m.
12-05-2010, 11:56 PM
If the pivot cups are in the same place, then no.... There will be no difference, other than your links won't be slanted forward.
Razer
13-05-2010, 12:13 AM
What part nr are those hubs?
ashleyb4
14-05-2010, 11:03 PM
2126 i believe.

A
RS Concept
16-05-2010, 09:26 PM
Hi,

I use the same trick on my X6sq

no problemo
Body Paint
17-05-2010, 08:06 PM
If you have turned the entire rear end around to make the car mid engined then surely the right hub should be on the left hand side? (as long as they are zero degree hubs)
tony12795
18-05-2010, 09:29 PM
Hi Ash, If there zero it will not make a diffrence what side they go on. But with those hubs on I think the car will not fit in the BRCA box (It's to wide) you have to run the sort VLA and then it's not so good over the bumps.

Why are you running them hubs anyway, I could understand you playing with the 1 degree hubs but not zero?

Tony
ashleyb4
18-05-2010, 09:41 PM
Brian told me to put them on at the indoor worksop event not 100% sure what it does thinking about it the std hubs are 0 dgree so maybe these are 1 degree now im confused.... It does fit in the box. Ive been running it like this since then.

A
tony12795
19-05-2010, 10:46 AM
Right okay, I think Brian is running the 1 degree hubs or he was at Ozfest.