Front Shock Tower

[Adam31]

Has anyone used the Xtreme racing 4mm front tower was going to order as they are a bit thicker, just wondering if the hole positions are the the same for the shock mounts as it has about 7 holes.

http://www.amainhobbies.com/product_info.php/products_id/21313/n/Xtreme-Racing-Team-Associated-B44-Thick-Carbon-Fiber-Front-Shock-Tower-4mm

[traffman]

I use the Atomic Carbon Shock Tower , it's 4mm thick and i still utilize the standard screws with it.

Never been a concern with regards to reliability .

[traffman]

Re read your post ! I think theres far more choice on that tower.

[zaquiz]

Has anyone used the Xtreme racing 4mm front tower was going to order as they are a bit thicker, just wondering if the hole positions are the the same for the shock mounts as it has about 7 holes.

http://www.amainhobbies.com/product_info.php/products_id/21313/n/Xtreme-Racing-Team-Associated-B44-Thick-Carbon-Fiber-Front-Shock-Tower-4mm

Yes the holes are the same. Inner hole equals to the one in the centre of the extreme tower. And outer to the upper-outer on extreme.

Al thougt I would not recomend them. I have broken 3 green extreme towers. They seem really week.

I now use the Atomic Carbon which are much better.