PDA

View Full Version : xxx4


greeny
30-07-2007, 07:43 PM
hi all, been offered a xxx4.. i have heard that they dont really workon bumpy ground

what modifications are needed to make them work on bumpy terrian.

jordan

Slimboyfat
30-07-2007, 08:06 PM
convertion kit for XX4, lol.

LEGEND
30-07-2007, 08:13 PM
Well from what i have tried, the only thing that could be changed is the setup and how hard or soft the shocks are, as-well as springs. Well the last competitive race i did with one, was the in-door finals and the shocks were quite hard so over the bumps the back-end might suddenly pop-up, which sometimes makes it hard to race on bumpy tracks. But on the rest of the track it was awsome, a really good stable car to drive, very fast and smooth.:)

gazbaz2
30-07-2007, 08:42 PM
hi all, been offered a xxx4.. i have heard that they dont really workon bumpy ground

what modifications are needed to make them work on bumpy terrian.

jordan

You carnt really do anything with them, well only the obvious kind of setups, very very good car on smooth tracks though, about 1 of the fastest 4wd's other than the pred

gazbaz2
30-07-2007, 08:43 PM
hi all, been offered a xxx4.. i have heard that they dont really workon bumpy ground

what modifications are needed to make them work on bumpy terrian.

jordan
Other than that, trade it in for a XX4 lol:D :D :D

bert digler
30-07-2007, 08:43 PM
convertion kit for XX4, lol.
aint that an x5 lol:D

bigred5765
30-07-2007, 09:42 PM
o yes you can do something with them,
buy the conversion kit that changes it to a x5

matt
30-07-2007, 10:13 PM
I liked my old xxx4 but i did spend a few quid on it. A oneway is a must aswell as the tc front pivot blocks, extended steering arms, alloy pivot blocks front and rear but i can't remember what degree, LCD driveshafts helped but not needed, yellow HD belt, if you can get hold of any the trinity rear hubs are good if not use the bk2 ones. Is it a xxx4g+ or a standard xxx4.

jim76
31-07-2007, 09:44 AM
the Paul Worsley rear brace helped a little at the rear. The oneway, TC blocks and extended steering arms are a must as Matt says. SuperDan Greenwood used to make these but doubt he still has them. You can make your own from a broken front shock mount etc.

A friend still races his XXX4 occasionally and when i tried it found it handled really well. He runs the really big holed pistons in the rear with slightly thicker shock oil then normal. Helps reduce the pack slightly so it goes over bumps a bit better.

matt
31-07-2007, 04:27 PM
i used blue pistons front and back with red springs at th rear and black at the front

magnus
03-08-2007, 06:43 AM
On our slightly bumpy dirt track I used 30 oil, orange pistons, pink springs, inside hole, long vla and rollbar with large/oversize clamps. Front with blue pistons and 60 oil, silver springs. Also try narrow wheels /old Losi, and dogbones. Still though, the xx4 is better:D.

raceGEEK
12-08-2007, 07:30 PM
can anyone post pics of the extended steering arm mod, also are any mods needed for the tc pivot blocks, or is that a direct fit? thanks.