Whoops

[antnee]

http://i55.photobucket.com/albums/g138/antnee-m/DSC00025.jpg

whoops! Its what you get for assembling a diff when you've had one to many pints!:p

What are the part numbers for a XXX-CR diff gear and diff balls?

[MikePimlott]

This is the Third time ive seen this now.
1st time was twice in one day, same person.

[tyreman]

Thats what happens when you set your diff too loose, it slips creates heat and melts your pullys.
Diff gear is A3036
Diff balls are A6951
Did you have the copper shims under the diff plates?

[antnee]

the thing is it was set almost as tight as it can be :confused:

and no it doesnt have any shims

[antnee]

http://dcracing.co.uk/dcrshop/product_info.php?products_id=618

will those do?

[tyreman]

At that price I wouldn't have thought they were carbide, so won't last 5 minutes.
Is it a genuine XXXcr diff??
Does one of the diff halves have the male tube machined or is it seperate (you can tell as there is NO flat side or D shape where the the diff rings sit).
The diff rings you want are A3039 if it is XXXcr diff.

[antnee]

the diff rings hace a d shape, well i ordered some bits last night from DC so I hope I can put them together tomorrow when I get in from the pub again(last day:) )

[antnee]

Can you buy a full diff from anywhere?

[tyreman]

Can you buy a full diff from anywhere?

No unfortunatly not

[antnee]

:( it did the same tonight, it kept losening itself, so i think the nut may have gone

[tyreman]

:( it did the same tonight, it kept losening itself, so i think the nut may have gone

It may soud stupid but what side have you got the diff screw?
Lokking from the back of the car to the front it should be on the left side.
If it's in the other way round it will loosen itself.

[bert digler]

It may soud stupid but what side have you got the diff screw?
Lokking from the back of the car to the front it should be on the left side.
If it's in the other way round it will loosen itself.

with brushless if being used torque is huge and this is critical also those diff plates with shims a very sound idea gives a safety net on settings;)

[antnee]

diff screw is on the right side(well left side:p ) It would tighten fine and go fine for a while and then just loosen off, o those shims everyone said to use just messed it up too.

Has anyone got a full spare diff or diff gear in the nottingham/linc area?

[ashleyb4]

This may sound really mad but if you fancy giving the cr a race at a regional coventry isnt to far away from you and there is a mid west regional on next sunday on there, a week tommorow and im sure if you where to come and ask im sure someone like brian or sleigh they could sort your problem. Not voletering them of course but they are two very friendly people who helped me loads. Just a though if you are interested.

A

[antnee]

im off on holiday for 2weeks on tuesday, im supposed to be going to the TM comeback bash tomorrrow aswell, just wont have a car to run :wtf: