PDA

View Full Version : Shocks


Shaun 'TheSheep' Atkinson
28-07-2010, 09:26 PM
After noticing Kyosho have just brought out some new 'big bore' shocks, Any plans for Durango to go down the 'big bore' route?? :thumbsup:

telboy
28-07-2010, 09:47 PM
Not a clue!;)

blitzboy
28-07-2010, 09:50 PM
dude its all about the big bores eh sell ya some losi dude they work sweeeeeeeeeeeeeeeeeetttttttttttttttt as for me :woot:

MHeadling
29-07-2010, 12:05 PM
I think it would be a bit tricky getting big bores on a DEX410 as the front drive shafts run very close to the std shocks.

But I would like to see someone try it out!

DaHomie
29-07-2010, 01:59 PM
I think it would be a bit tricky getting big bores on a DEX410 as the front drive shafts run very close to the std shocks.

But I would like to see someone try it out!

Check out the pics of the new 2010 specs car to see how to get a bit more clearance up front :) (don't know if it's intentionally really, but shock mounts for the rear are mounted up front)

telboy
29-07-2010, 06:03 PM
Gonna say, it only needs the shock spacing forwards 2mm or so.
Should be possible.

Shaun 'TheSheep' Atkinson
29-07-2010, 07:00 PM
Has anyone tried fitting the Schumacher Big Bore shocks?

Not sure if they would fit but just a thought, if so, maybe someone would do a days test at there local club or something, give us all some feedback on how they affect the car :thumbsup:

mark christopher
29-07-2010, 07:33 PM
dont the durango ones work? is there somthing wrong with em?

Ah your a sheep and want to follow the rest ......:lol:

Shaun 'TheSheep' Atkinson
29-07-2010, 07:53 PM
How is asking a simple question about any plans TD may have for big bore shocks following anybody? :confused:

Yes the Durango one's work perfectly fine! and there isn't anything wrong with them what so ever!

There was nothing wrong with the shocks on the Schumacher or Kyosho, but they still introduced big bore shocks :woot:

stegger
29-07-2010, 08:53 PM
Maybe adam's already tried it, after all he's been running an SV with big bores ;)

mark christopher
29-07-2010, 08:54 PM
How is asking a simple question about any plans TD may have for big bore shocks following anybody? :confused:

Yes the Durango one's work perfectly fine! and there isn't anything wrong with them what so ever!

There was nothing wrong with the shocks on the Schumacher or Kyosho, but they still introduced big bore shocks :woot:
depends who you talk to, loads put losi shocks on!

Shaun 'TheSheep' Atkinson
29-07-2010, 09:54 PM
But that's called personal preference! nothing actually wrong with them, the original ones worked and did there job!

People use yellow wheels, doesn't mean the white ones don't work!

telboy
29-07-2010, 10:21 PM
White ones don't work!!


YELLOW IS THE FUTURE!!!!!:thumbsup::lol:


Thats why Durango are releasing the 2010 with yellow wheels!!!:p

Just ask adam, yellow wheels are at least 1sec per lap faster!
Eh Adam?;):p




I actually found the original shock on the Cat perfectly fine. :)

stegger
30-07-2010, 06:39 AM
Just ask adam, yellow wheels are at least 1sec per lap faster!
Eh Adam?;):p




I actually found the original shock on the Cat perfectly fine. :)

I hope so Tel i need all the help i can get :lol:, pick my baby up tonight :thumbsup: Hopefully have it built and setup for sunday.

mark christopher
30-07-2010, 08:06 AM
But that's called personal preference! nothing actually wrong with them, the original ones worked and did there job!

People use yellow wheels, doesn't mean the white ones don't work!

nope it because they thought they were better

Shaun 'TheSheep' Atkinson
30-07-2010, 05:17 PM
Yeah they 'thought' not proved!

What do you have to do around here to get a simple answer to a simple question of curiosity without sarcasm?

:confused:

schmacher
31-07-2010, 09:16 PM
i'm working on getting a complete set of schumacher big bores myself...the bottom fo the springs on those big bores are tapered so clearance shouldn't be an issue...then i'll get the shock caps anodized black and the lower cap anodized red to match the durango shocks...when i get this done i'll post pics :thumbsup:

fastinfastout
01-08-2010, 01:37 AM
why would you want to replace one of the best shocks around with rubber boots, for another brand? The durango shocks are awesome and keep the oil very fresh.

lastplace
01-08-2010, 10:33 AM
Could not resist the temptation nicked the shocks of the Cougar and tried them on the cat last night at broxtow, so this morning offered them up to the Durago .

To fit them on the front you will have to pack out the bottom with a 3mm spacer 2mm just might touch the spring. the big problem is getting the top mounted . In the R version they have 4mm holes not the standard 3mm and used a custom post this post will need to be packed out by around 1 to 2mm this also leads to a problem with the plastic bush, don't believe that the bush will fit into the Schumacher Shock caps. but because of the larger holes on the shock tower we carn't use the normal M3 long bolt and the bushes from the Schumacher. will need some more investigation.

Same problem with the Rears but the rear drive shafts have a lot more clearance and would not need to be packed out.

Oh and i have fitted the shock boots to the Big bores sick of looking at the oil leaking from the Schmachers shocks (LoL):woot: what you carn't see don't bother you. (and i did use Green Slime on the Orings) plating comming off the inside from the piston rubbing.

If i ever get the shocks fitted and tried out i'll let you Know.
Dave

lastplace
01-08-2010, 10:52 AM
One more thing i forgot to mention is the Schumacher big bores are shorter then the durangos by around 5 mm between the mounting centers. this will reduce the droop front and rear .The amount of front compression is the same but the rear is less so the rear might bottom out on landing. to increase the rear compression you could use the short ball grippers but this would decrease the rear droop even more by around a further 5mm. you don't want to be doing this. on the front i have fitted 2mm of internal spacers in the durago shocks as i have too much droop anyway but feal that fitting the schumacher shock would take away far to much Droop and not work right.

So After all this Don't Bother :woot:

Have fun and I'll see you all at Leverton If i can find it and don't end up at Skeg.

Cheers dave

lastplace
01-08-2010, 11:22 AM
Just been playing and found that the orginal small bore schmacher springs fit these shocks right length and bore.:thumbsup: so have a new lease of life.

but My Yokomo BX spring are too big on the inner bore and are too long shame as i like the bright shinny Colours (If you know me and seen my cars you will now i run a right mismatch of Yoko and D4 shocks with different springs on my Cat):cry:

colours same goes for the Losis springs:thumbdown:

My pit box is starting to get so full of different springs that i don't want to buy any more, It's bad enought that i have to buy new springs for the Cougar.

Cheers you guys

Shaun 'TheSheep' Atkinson
01-08-2010, 05:27 PM
Thumbs up for trying though mate :thumbsup:

we will just have to wait and see what Durango do then eh?

It looks pretty easy to find actually, we had a look on Google earth :)

Co-ordinates are on Leverton Raceway's website (or postcode)

schmacher
08-08-2010, 09:48 PM
what about the yokomo big bores ?