PDA

View Full Version : Just got a 201 what do I need!!???


dbizzle5
03-08-2010, 09:33 PM
Just got a 201 and was just wondering if there is anything I need like springs, weights, etc etc

cheers

DCM
03-08-2010, 09:38 PM
front springs(running AE Browns at the mo), and weight under the servo and lipo.

Rich D
03-08-2010, 09:44 PM
Sorry to thread Hijack, but why the AE brown and not any of the TRF 201 fronts Steve ?

Rich D
03-08-2010, 09:45 PM
Just got a 201 and was just wondering if there is anything I need like springs, weights, etc etc

cheers


Maybe an RW racing idler gear too Dan ( MK have them )

DCM
03-08-2010, 09:55 PM
Sorry to thread Hijack, but why the AE brown and not any of the TRF 201 fronts Steve ?

the kit springs were to soft, and I haven't had time to order up the fronts yet, and not sure if they go hard enough, as I find the 4wd fronts are to soft to.

DCM
03-08-2010, 09:58 PM
oh yes, and the RW idler gear, plus the layshaft when it is done!!

Rich D
03-08-2010, 09:59 PM
Ah right, ive got the 201 front kit although im unsure which is softest ?

There are green, brown, black in it.

The std ones i know from the 416 are :-

Red - soft
yellow - medium
blue - "hard"
white - harder

If anyone can edit my list to fit the 201 front springs in order then it would be appreciated.

DCM
03-08-2010, 10:01 PM
Tamiya USA says

Hard (green), medium (black), and soft (brown)springs included

Rich D
03-08-2010, 10:09 PM
Tamiya USA says


Cheers mate that helps a little

DCM
03-08-2010, 10:15 PM
I know AE Browns were a bit stiffer than the kit springs.

MikePimlott
04-08-2010, 12:00 AM
get the 501 spring kit front and rear. the 201 front spring kit is too soft.

lead under servo and cells.

msxmre
04-08-2010, 12:35 AM
How much weight are you guys running under lipo and servo? Can the weight be placed anywhere else like on top of lipo battery?
Thanx in advance
Scotty...

Rich D
04-08-2010, 06:31 AM
How much weight are you guys running under lipo and servo? Can the weight be placed anywhere else like on top of lipo battery?
Thanx in advance
Scotty...

Tony Evdoka of Rudebits is the man to ask. Can't recommend his service highly enough :thumbsup:

Pedros20
04-08-2010, 06:43 AM
Hi Dan
I've put the rudebits brass weight ( heavy one) under the servo, Ansmann do a under lipo brass weight too, & Trf blue springs up front & Trf yellows on rear mate, Tried to get it as close to Lee Martins as possible.

dbizzle5
04-08-2010, 06:49 AM
Thanks everyone. So at the moment I guess the 411 spring kit and a bit of lead will be fine for the meantime.


cheers:thumbsup:

Hi Dan
I've put the rudebits brass weight ( heavy one) under the servo, Ansmann do a under lipo brass weight too, & Trf blue springs up front & Trf yellows on rear mate, Tried to get it as close to Lee Martins as possible.

Rich D
04-08-2010, 06:51 AM
And the RW idler gear bud. Seems luck of the draw as to whether the STD one will hold together. They are only a fiver from MK Racing.

Lee Martin
04-08-2010, 07:11 AM
AE brown springs are still too soft unless your racing on dirt?

to add to the 201 kit - i advise

-rudebits brass
-option springs

Then once you want more stuff:

-.5 degree rear hubs
-blue bling
-Ghea pistons
-Rudebits carbon strap

;)

msxmre
04-08-2010, 07:34 AM
Lee, Rich and DCM could you let me know which weight you're putting under lipo battery and servo as Tony's got a couple of different weights.
I'm gonna order some.
Thanx guys
Scotty...

JustARcFan
04-08-2010, 07:44 AM
Few questions:

to add to the 201 kit - i advise

-rudebits brass 84gr under the lipo + 70gr under the servo
-option springs TRF501X Spring set?


Then once you want more stuff:

-.5 degree rear hubs Where do you use them as on astro and grass we always use 0° or is this something specific for the 201?
-blue bling :thumbsup:
-Ghea pistons Which ones for grass and astro?
-Rudebits carbon strap :thumbsup:

DCM
04-08-2010, 08:24 AM
I made my own tapered pistons!
501 front springs are a little longer I think.... not by much though

Lee Martin
04-08-2010, 08:44 AM
i use between 50 & 100 grams under my lipo. average 80.

Springs - get the harder ones. green and then some 511 blue's.
i use .5 degree rear hubs everywhere.
pistons - 1.3 x 2 hole & 1.4 x 2 hole

jasonrcb
04-08-2010, 08:53 AM
Lee is the under weight you run with the brass or carbon battery strap

dbizzle5
04-08-2010, 03:26 PM
AE brown springs are still too soft unless your racing on dirt?

to add to the 201 kit - i advise

-rudebits brass
-option springs

Then once you want more stuff:

-.5 degree rear hubs
-blue bling
-Ghea pistons
-Rudebits carbon strap

;)

Where do yo get spring kits, rear hubs, blue bling etc from? In fact any Tamiya spares?

GRIFF55
04-08-2010, 03:41 PM
lee gets everything direct from tamiya. Everybody else uses fusion hobbies, rcmart, mushroom etc as there is not much spares support in the uk. hope this helps

tony6187
04-08-2010, 03:59 PM
qare the .5 hubs out yet?

DCM
04-08-2010, 04:04 PM
August 18th I beleive, along with the alloy squat blocks RF and RR for it to!

Rich D
04-08-2010, 04:25 PM
Where do yo get spring kits, rear hubs, blue bling etc from? In fact any Tamiya spares?

Ebay is good Dan when you know the part numbers, easy way of buying from HK/Malaysia/Japan

The 201 comes pretty much hopped up out of the box compared to the 511 though.

The zero degree alloy rear hubs are part number 53962 but they are only bling and stronger. I run them on my 511.

DCM
04-08-2010, 05:25 PM
I am inclined to get the 0.5' rear hubs, but the big upgrade I am doing, is the alloy suspension holders.... otherwise the only other upgrade I done, is the imperial front axles.

mof
04-08-2010, 05:59 PM
The zero degree alloy rear hubs are part number 53962 but they are only bling and stronger. I run them on my 511.


They offer rear camber link height adjustability that the stock ones don't. So they are not "just bling".

Rich D
04-08-2010, 06:42 PM
They offer rear camber link height adjustability that the stock ones don't. So they are not "just bling".


Yes, apologies, you`re right there. I overlooked that as i ran them from new.

For my 201 i have bought upgrades/bling

Ghost Ceramic balls
Ghost Ceramic thrust balls
Full Rudebits Weights ( under servo and under lipo )
TRF lightweight motor mount
TRF titanium screw set
zero degree 53962 rear alloy hubs until the 0.5 degree ones are available.
RW idler
RW spur

Will get

Ghea pistons
alloy suspension mounts

DCM
04-08-2010, 07:12 PM
how much were the ceramic balls Rich?

Rich D
04-08-2010, 07:18 PM
how much were the ceramic balls Rich?

here you go Steve :)

http://www.ghostrc.co.uk/Shop/index.php?cPath=21_29

DCM
04-08-2010, 07:49 PM
well, they ain't bad prices!!

Rich D
04-08-2010, 07:55 PM
thats what i thought ! :thumbsup:

Fredrik Emilsson
04-08-2010, 08:40 PM
August 18th I beleive, along with the alloy squat blocks RF and RR for it to!

They will be available this week.

DCM
04-08-2010, 08:43 PM
best I save me money and buy them then!!!

Fredrik Emilsson
04-08-2010, 10:21 PM
Me too...;)

tony6187
05-08-2010, 11:42 AM
They will be available this week.
any idea who will be stocking them?

Fredrik Emilsson
05-08-2010, 05:33 PM
Stellamodels have them.

DCM
05-08-2010, 06:13 PM
ordered mine already!