Help with changing a sensor cable in a Novak velociti

[pete2222]

Can someone tell me if it is possible to replace the sensor harness in a novak velociti motor ( the non ribbed can version). I have taken a close look and can't see how this is possible as the cables go right inside the back of the motor, even after taking the black plastic back off it. Thanks.

[Dazzler]

It's possible, I've done one about 12 months back. It's a bit of a mission. You have to de-solder the field windings to get access. Think I posted on here somewhere.. here is a bit more info. http://www.oople.com/forums/showthread.php?t=31439

[pete2222]

It's possible, I've done one about 12 months back. It's a bit of a mission. You have to de-solder the field windings to get access. Think I posted on here somewhere.. here is a bit more info. http://www.oople.com/forums/showthread.php?t=31439

Thanks Dazzler, I'm first waiting for a new motor to arrive which will help me figure out if it's the motor or speedo at fault. It may be that I don't need to do this.

[bodgit]

This post may be of help
http://www.oople.com/forums/showthread.php?t=39688

[pete2222]

This post may be of help
http://www.oople.com/forums/showthread.php?t=39688

Thanks Bodgit, good thread.