PDA

View Full Version : 2010 Euros Setups


ramdrive
31-08-2010, 01:29 PM
Has anyone got any TRF setups from the 2010 Euros?

Need to dial my 511 in:thumbsup:

mattybucks
31-08-2010, 01:32 PM
Has anyone got any TRF setups from the 2010 Euros?

Need to dial my 511 in:thumbsup:

LM would be the man to ask as he had the quickest 511 out there!!! :drool:

LhOrLoGeR
31-08-2010, 01:45 PM
LM would be the man to ask as he had the quickest 511 out there!!! :drool:
And it's the same for the 201 :drool: x1000

helmet993
31-08-2010, 06:14 PM
http://www.oople.com/forums/showthread.php?t=51801

Pre Euros setup from Lee.

ramdrive
31-08-2010, 07:31 PM
Thanks, but there is no 4WD there from Lee, unless I am going blind!

http://www.oople.com/forums/showthread.php?t=51801

Pre Euros setup from Lee.

ramdrive
02-09-2010, 09:20 AM
Have PM'd him but had no reply :thumbdown:


LM would be the man to ask as he had the quickest 511 out there!!! :drool:

mattybucks
02-09-2010, 09:27 AM
Have PM'd him but had no reply :thumbdown:


Well it's his set-up he does'nt have to share it.

GRIFF55
02-09-2010, 10:02 AM
He will reply, i'm sure. Just catching up on work missed whilst at euros.

Fabs
02-09-2010, 10:08 AM
Has anyone got any TRF setups from the 2010 Euros?

Need to dial my 511 in:thumbsup:

I wasn't aware there was a clay track in the UK??

ramdrive
02-09-2010, 10:34 AM
Private track mate :thumbsup:

I wasn't aware there was a clay track in the UK??

ramdrive
02-09-2010, 10:35 AM
True, just keen to dial in my 511!

Well it's his set-up he does'nt have to share it.

DaveG28
02-09-2010, 02:06 PM
Start with Hupo's setup, put slightly heavier oil in the front and you'll be close, I'm sure Lee will post up when he can!

ramdrive
02-09-2010, 02:18 PM
Thanks Dave, currently running 35wt front and rear with Tamiya blue springs. Works OK but lacks bite when accelerating out of tight corners after a jump.

I will look at Hupo's

Start with Hupo's setup, put slightly heavier oil in the front and you'll be close, I'm sure Lee will post up when he can!

RudeTony
02-09-2010, 02:25 PM
Start with Hupo's setup,

Dave - he doesn't drive Tamiya cars now - or have I missed something.
Lee is the set up you need - Dave are you at Coventry dude!?

mattybucks
02-09-2010, 02:41 PM
Start with Hupo's setup, put slightly heavier oil in the front and you'll be close, I'm sure Lee will post up when he can!


What holes do you use on the bulkheads though as it does no have them on the setup sheet. (for use on astro) 1 being nearest to the shock tower?

MikePimlott
02-09-2010, 03:01 PM
Number 1 on the front with 2mm spacer

Number 2 at the rear with 1mm spacer

ramdrive
02-09-2010, 03:05 PM
Thanks

Number 1 on the front with 2mm spacer

Number 2 at the rear with 1mm spacer

DaveG28
02-09-2010, 04:13 PM
Dave - he doesn't drive Tamiya cars now - or have I missed something.
Lee is the set up you need - Dave are you at Coventry dude!?

He is indeed with Durango now, but his 2009 euro's setup is the b****cks :thumbsup: Think it's on trfracing too! To be honest, I personally prefer Hupo's setup to the one's I've tried to copy off Lee as I prefer the lighter front oil! For ballstud spacers remember if you use kit standard ballstuds take 1mm off all the spacers quoted in setups, if you use the hard hex head studs use the quoted setup spacer amount!!

Tony, I am indeed at Cov both days (if I build my cars in time), looking forward to it! Are you there all weekend?

Dave

GRIFF55
02-09-2010, 04:41 PM
The oils that were ran at euros were lighter than the starting setup i think, as the grip was down. I ran .5 deg rear hubs also and found these to help generate rear end.

DaveG28
02-09-2010, 05:08 PM
The oils that were ran at euros were lighter than the starting setup i think, as the grip was down. I ran .5 deg rear hubs also and found these to help generate rear end.

Yep, definitely going to run 0.5 hubs on slippy indoor surfaces too!

GRIFF55
02-09-2010, 05:11 PM
Belsten had the 1's on and loved 'em!

RudeTony
02-09-2010, 05:33 PM
I'm there Dve - see yah then