PDA

View Full Version : Carbon Chassis?


mharlow
01-09-2010, 06:25 AM
Does anybody know if anyone is making a carbon chassis for the DEX410?

telboy
01-09-2010, 06:31 AM
There was one at the euro's, but not sure if its being put into production or not.
Looked nice.:)

SHY
01-09-2010, 06:58 AM
16446

A friend of mine made this! :thumbsup:

Rebelrc
01-09-2010, 07:14 AM
The standard chassis is better than those carbon ones , why spend more to go slower........strange the lure of some black material and some glue ..i just dont get it:confused:
Carbon i think has had its day in offroad! IMO

Rebelrc
01-09-2010, 07:37 AM
Sorry that last post seems a little grumpy:)...both those chassis look ace but i dont think personaly there would be a large market for them as the stock ali chassis is perfect for its job:)

ApexSpeed
01-09-2010, 03:17 PM
The standard chassis is better than those carbon ones , why spend more to go slower........strange the lure of some black material and some glue ..i just dont get it:confused:
Carbon i think has had its day in offroad! IMO

There is no possible way you could know that, because there haven't been any carbon fiber chassis to compare the aluminum to. The defining difference in the two would be weight. These aren't 1/8th scale nitro buggies, so aluminum chassis are not that crucial—and aluminum CAN be tweaked.

Flex control would be something else that could be tuned with CF weaves, too.

But, boy, that carbon tub is damn sexy. :drool:

dlewis4
01-09-2010, 07:36 PM
I would be all over a carbon chassis if they were released! They are just too sexy NOT to have one!

Funkymojo
01-09-2010, 07:40 PM
Does anybody know if anyone is making a carbon chassis for the DEX410?

I think the carbon fibre chassis is home made by 2009 IFMAR Champ, Martin Achter.

mharlow
02-09-2010, 08:34 AM
There is no possible way you could know that, because there haven't been any carbon fiber chassis to compare the aluminum to. The defining difference in the two would be weight. These aren't 1/8th scale nitro buggies, so aluminum chassis are not that crucial—and aluminum CAN be tweaked.

Flex control would be something else that could be tuned with CF weaves, too.

But, boy, that carbon tub is damn sexy. :drool:

Yes i've already had an aluminium chassis tweak. That's why I would like to try a carbon chassis. The aluminium bowed in the middle and I wouldn't have noticed it only that my centre drive shafts kept falling out and I tracked it down to the chassis.

mharlow
02-09-2010, 08:35 AM
I think the carbon fibre chassis is home made by 2009 IFMAR Champ, Martin Achter.

Do you know if he his putting them into production and if so how do I contact him?

Funkymojo
02-09-2010, 09:20 AM
Do you know if he his putting them into production and if so how do I contact him?

You can read more about the carbon fibre chassis over here

http://www.oople.com/rc/photos/euros2010/day4/

dlewis4
02-09-2010, 04:30 PM
i otta have one!

HyperFX
03-09-2010, 03:23 AM
16446

I friend of mine made this! :thumbsup:

I want that dexy chassis!

mani549
03-09-2010, 07:48 PM
this here?^^

http://www.abload.de/img/fotow3tz.jpg

dlewis4
03-09-2010, 08:25 PM
i want one of those too!

ApexSpeed
03-09-2010, 08:51 PM
this here?^^

Great googily moogily! :drool:

Rebelrc
03-09-2010, 09:32 PM
Apex speed
How do you know theres been none to compare
the durango has been around in prototype form now for 6 years( i have the prototype)
And ali does not tweak! it bends!or at worst snaps or cracks
a tweaked chassis is a chassis that appears to be flat but bends inconsistantley either left to right or front to back due to a massive stress loading
not one that is bent so much the props fall out thats bent! (he says tweaking his empty beer can in his frustrated hand)lol:thumbsup:
if thats the case and everything thats bent is tweaked where the **** does the word bent come from and why do we use it?
you are wrong and anyone that says i am wrong is most definatley wrong:thumbdown:

Apex do you think i dont know about carbon/ali/rccars/manufacturing/chassis dynamics?:confused:

But anyway
Balls:D

ApexSpeed
03-09-2010, 09:39 PM
And ali does not tweak! it bends!or at worst snaps or cracks

if thats the case and everything thats bent is tweaked where the **** does the word bent come from and why do we use it?
you are wrong and anyone that says i am wrong is most definatley wrong:thumbdown:


Hahaha, ok. You're right, and you don't need a dictionary. Tweaked is not bent, and inside is outside. Keep drinking, you're still sober enough to type. ;)

Rebelrc
03-09-2010, 09:56 PM
Sorry for my spelling but i am up to my neck in epoxy resin ( for you apex thats the clear stuff in cf)
APEX as for my spelling D/Head its carbon FIBRE !!!!!!!!!!!!!!!!!!!!!!!!!!LOL
A tiny part of my qualification to comment
wheres yours ...SHOW IT>>LOL
Yes photo 3 is 22 caret gold plated rango prop, which i have just done in my w/shop and am going to do the whole transmission steel parts to stop them rusting

ApexSpeed
03-09-2010, 09:57 PM
You've been breathing too many epoxy resin fumes. Nice internet muscles you have, too. :thumbsup:

Rebelrc
03-09-2010, 10:12 PM
???????????????KER!

m2d
06-09-2010, 05:49 AM
I will receved this week some chassis carbone same at the Euro.
I try it this week-end

RETRO R/C
06-09-2010, 08:03 AM
Bet you are glad you asked Mick!!! :cry::thumbsup::thumbsup::thumbsup:

LOL

Cheers

Darryn

SHY
06-09-2010, 10:59 AM
You can read more about the carbon fibre chassis over here

http://www.oople.com/rc/photos/euros2010/day4/

Well, that's a flat one... the one my friend made is a fully moulded tub chassis (A-C S2/S4 style) :thumbsup::wub

Funkymojo
06-09-2010, 06:24 PM
Well, that's a flat one... the one my friend made is a fully moulded tub chassis (A-C S2/S4 style) :thumbsup::wub

The chassis your friend made looks ace!! :thumbsup:

werner1619
07-09-2010, 05:06 PM
So who is gonna make a few ?
pic on page 1 is sick! i want one!

kek23k
07-09-2010, 05:33 PM
Sorry for my spelling but i am up to my neck in epoxy resin ( for you apex thats the clear stuff in cf)
APEX as for my spelling D/Head its carbon FIBRE !!!!!!!!!!!!!!!!!!!!!!!!!!LOL
A tiny part of my qualification to comment
wheres yours ...SHOW IT>>LOL
Yes photo 3 is 22 caret gold plated rango prop, which i have just done in my w/shop and am going to do the whole transmission steel parts to stop them rusting

Nice topiary in the background ;)

Martin Achter
08-09-2010, 09:23 AM
Hello,

i am Martin Achter. perhaps a few of you know me.
I saw this thread about the carbon DEX410 chassis.
To clear things up, i am making this chassis for the Durango under my own company called 8-racing. The normal retail price is 69€.

The advantage of this chassis is that it has more flex than the alloy one.
This gives you more grip on less grip tracks. additionally it is 60g lighter than the stock one (120g stock, 60g carbon)
But you have to run it with the alloy sidebars, with the plastic sidbars from the 410R, it has to much flex and the driveshafts can jump out.

Let me know what you think!

SHY
08-09-2010, 09:47 AM
Hello,

i am Martin Achter. perhaps a few of you know me.
I saw this thread about the carbon DEX410 chassis.
To clear things up, i am making this chassis for the Durango under my own company called 8-racing. The normal retail price is 69€.

The advantage of this chassis is that it has more flex than the alloy one.
This gives you more grip on less grip tracks. additionally it is 60g lighter than the stock one (120g stock, 60g carbon)
But you have to run it with the alloy sidebars, with the plastic sidbars from the 410R, it has to much flex and the driveshafts can jump out.

Let me know what you think!

Welcome to oOple Champ!!!

Looks great!!! :thumbsup:

simoncrabb
08-09-2010, 09:52 AM
Hello,

i am Martin Achter. perhaps a few of you know me.
I saw this thread about the carbon DEX410 chassis.
To clear things up, i am making this chassis for the Durango under my own company called 8-racing. The normal retail price is 69€.

The advantage of this chassis is that it has more flex than the alloy one.
This gives you more grip on less grip tracks. additionally it is 60g lighter than the stock one (120g stock, 60g carbon)
But you have to run it with the alloy sidebars, with the plastic sidbars from the 410R, it has to much flex and the driveshafts can jump out.

Let me know what you think!

Hey Martin, thanks for coming on and posting about it - I was most happy to let you know about this thread.

The product looks great! How does it compare to the alloy chassis with plastic side bars - IE the 410R?

m.v
08-09-2010, 01:02 PM
Hello,

i am Martin Achter. perhaps a few of you know me.
I saw this thread about the carbon DEX410 chassis.
To clear things up, i am making this chassis for the Durango under my own company called 8-racing. The normal retail price is 69€.

The advantage of this chassis is that it has more flex than the alloy one.
This gives you more grip on less grip tracks. additionally it is 60g lighter than the stock one (120g stock, 60g carbon)
But you have to run it with the alloy sidebars, with the plastic sidbars from the 410R, it has to much flex and the driveshafts can jump out.

Let me know what you think!
Hi Martin,

Could you please send us your company site and details on how we can get one of this beautifull chasis??

Thanx

Martin Achter
08-09-2010, 02:04 PM
Hi,

my company site is www.8-racing.de (http://www.8-racing.de) its only german at the moment.
I don't have much products at the moment, but a lot of intresting parts in the pipe like carbon shocktowers for different models and carbon chassis for 1/8th scale.

For international orders, you can order over my webshop or just write me an email. I think email is easier, cause the shop is just german at the moment. [email protected]

The Durango 410 with carbon chassis and alloy sidebars has pretty the same flex than the original 410R with alloy chassis and plastic sidebars.

Thanks Simon for letting me know about this thread

m.v
08-09-2010, 04:35 PM
Hi,

my company site is www.8-racing.de (http://www.8-racing.de) its only german at the moment.
I don't have much products at the moment, but a lot of intresting parts in the pipe like carbon shocktowers for different models and carbon chassis for 1/8th scale.

For international orders, you can order over my webshop or just write me an email. I think email is easier, cause the shop is just german at the moment. [email protected]

The Durango 410 with carbon chassis and alloy sidebars has pretty the same flex than the original 410R with alloy chassis and plastic sidebars.

Thanks Simon for letting me know about this thread
Thanx Martin for the information.

I must admit that carbon chasis looks very tempting.

pmes
17-09-2010, 04:10 PM
16446

A friend of mine made this! :thumbsup:

This is the most beautiful single R/C car part I've ever seen. I mean, you must be over 18 to view the thing here in the US, that's downright pornographic.

m2d
20-09-2010, 06:32 AM
the carbon chassis was arrived saturday in france,
very good quality , congratulation Martin

Twister
20-09-2010, 08:48 AM
Beautiful work Mr.Achter :thumbsup:

X5 Addict
22-09-2010, 12:21 PM
Bet you are glad you asked Mick!!! :cry::thumbsup::thumbsup::thumbsup:

LOL

Cheers

DarrynHis fingers must be sore, he hasn't posted since!:p

X5 Addict
22-09-2010, 12:24 PM
16446

A friend of mine made this! :thumbsup:Hey Shy how are you??:) Will your friend be making more of these? Any idea on weight and flex?
Cheers
Tom.

MADMAX79
09-10-2010, 07:56 PM
Does anybody know if anyone is making a carbon chassis for the DEX410?

U can buy carbon sticker from 3m

traffman
09-10-2010, 10:33 PM
m2d-shop in France sell the cf chassis.

mharlow
10-10-2010, 08:39 AM
U can buy carbon sticker from 3m

I have tried the 3M sticker and the car handled terrible. :p

RETRO R/C
11-10-2010, 10:17 AM
I have tried the 3M sticker and the car handled terrible. :p

Thats because you only put it on the bottom - you have to put it on the top as well:rolleyes:................

You dont get the carbon strength if you do just the bottom!:yawn::bored::rolleyes::woot:

Seriously :rolleyes: - and to think you raced at the worlds in 89........pfffffffftt:rolleyes::thumbsup:

Hugz

Darryn

SHY
11-10-2010, 12:26 PM
Hey Shy how are you??:) Will your friend be making more of these? Any idea on weight and flex?
Cheers
Tom.

I'm great, thx! How are you mate?

No, he's a motocross star and is off racing that full time again now... he says motocross provides a lot more ***** than RC car racing! :lol::lol::lol:

RETRO R/C
11-10-2010, 12:39 PM
Hey SHY!!

LOVING that beetle in your showroom mate!!

Cheers

Darryn