View Full Version : Speed Passion ESC timing settings etc.
mikeyscott
06-09-2010, 08:34 AM
How much punch and timing do people generally run on the Speed Passion LPF / GT ESCs?
Big G
06-09-2010, 09:06 AM
7 punch and 8 timing. haven't touched mine for months and I use 5.5, 6.5 and 7.5 motors which I think work well lol
Slipper tends to no un-noticed outdoors, but on carpet it can be heard off the line and sometimes out of hairpins
ian h
06-09-2010, 11:54 AM
Cougar or Cat???
mikeyscott
06-09-2010, 11:57 AM
Cougar or Cat???
Both?
LPF in the SV
GT in the SX
bigred5765
06-09-2010, 12:10 PM
depends on track conditions and speed punch you want,thats why there their
Any opinions on the motor timing on the motor end (Speed Passion V3) and not the ESC?
bigred5765
06-09-2010, 12:14 PM
never change ares, run it has they come
Big G
06-09-2010, 12:28 PM
Any opinions on the motor timing on the motor end (Speed Passion V3) and not the ESC?
I toned mine down when I was trying to slow the car down for a small indoors track and didn't really think it changed much
D20MCK
11-09-2010, 06:59 PM
....
D20MCK
25-09-2010, 10:39 PM
....
I heard more timing advance = more heat = less power.
It may be more worthwile doing timing advance if you running in cold weather as this would help with the cooling of the electrics
sosidge
26-09-2010, 09:45 AM
I heard more timing advance = more heat = less power.
It may be more worthwile doing timing advance if you running in cold weather as this would help with the cooling of the electrics
Not sure where you would have heard that from.
Timing advance gives more power and more rpm and at the expense of torque and heat.
In off-road modified there is no need to worry about timing advance. Just set the ESC to default settings (205g is still the recommended software for off-road modified from Speed Passion), and leave the V3 motor timing in the middle of the slot.
Then gear it and run it. If you need more power, run more motor.
You can do a few small tweaks to the programming (drag brake, punch, electronic timing) to make it feel better for you, but don't go crazy.
The "supercharger" software is only for stock class where people try and get the maximum out of a limited motor, but the downside is poor throttle feel and confusing adjustments.
think i read it on the novak website
ive got the lpf 2.0
not sure what the V3 is...ive got the losi motor so maybe its a different feature?
superstu55
27-09-2010, 10:54 PM
Just a quick question, is the lpf 2.0 any good for a 10.5t motor or do i need some sort of stock spec speedo??
sosidge
27-09-2010, 10:57 PM
You can load any software you choose onto the LPF 2.0. It should run a 10.5 with any settings.
superstu55
27-09-2010, 11:05 PM
Thanks, its just that ive brought one ready to put in my car & then somebody has told me that the lpf 2.0 is more suited to running with a modified motor & not a 10.5t, they say i'd be better off with a stock spec speedo?? just wanted another opinion..
off topic but to save starting a new thread
is it safe to race my lpf 2.0 with out the fan... 8.5t motor
cheers!
Chris56
30-09-2010, 08:51 PM
The "supercharger" software is only for stock class where people try and get the maximum out of a limited motor
So thats why it kept cutting out with my 6.5:woot::woot: I bought my GT pro 2nd hand with an LPF manual so had no idea the boost was either on or existed (which it is when running factory defaults).
Sure is quick but the Lipos don't last long!
mikeyscott
30-09-2010, 08:56 PM
205g still recommended? Thought there was a newer version for mod which is on my GT.
May flash it to 205g then.
http://www.speedpassion.net/en/escsetup.asp
superstu55
05-10-2010, 08:08 PM
Has anybody used an lpf gt2.0 with a 10.5 turn (GM in paticular) on a small tight carpeted indoor track?
How did it run & what settings did you use?
I have not brought the motor yet but GM has been recomended by a few people & I was just wondering how well it would go with the lpf gt2.0..
Any advise much apreciated..
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.