View Full Version : RW Racing Cougar SV gear set
MK Racing
24-09-2010, 11:39 AM
Just to let you all know that we have received our 1st batch of the RW Racing transmission gear sets for the Cougar SV.
http://www.m-k-racing.com/product_info.php?products_id=8069
mikeyscott
24-09-2010, 12:00 PM
Got mine to try this weekend already :) after Steve ran his proto ones at F345s.
Steve has test these for a few meetings with success :)
danharding
26-09-2010, 08:36 PM
Used mine today, lovely bit of kit. :thumbsup:
GRIFF55
26-09-2010, 08:53 PM
saw these today and they looked pretty nicely made bit of kit:thumbsup:
MattW
26-09-2010, 09:37 PM
Neil's stuff always is!
hazeandfizz
26-09-2010, 09:53 PM
Very nice bit of kit and good value.
James.
Raul Garcia
28-12-2010, 04:56 PM
Just to let you all know that we have received our 1st batch of the RW Racing transmission gear sets for the Cougar SV.
http://www.m-k-racing.com/product_info.php?products_id=8069
Still available, and ship to US?
moth898
28-12-2010, 05:12 PM
you have to contact mk through their website via e-mail because his automated checkout doesn't include US or Canada. He will ship it no matter how you pay, no worries there.
tight tolerences, a little too tight when fitting the bearings but I guess thats more of a plus than minus. The gears installed in the aluminium gear housing using acer bearing are mint, the car whistles around the track. Worth the money in my opinion, cost me 45 canadian shipped I think.
mikeyscott
28-12-2010, 05:14 PM
I have used mine and they are superb, got an alloy gearbox coming and after the answer RC gearbox bearing kit once Marc has them back in stock
Raul Garcia
28-12-2010, 05:26 PM
Well I have the alloy housing already, and also have alloy outer gears too. So the only parts I want are the layshaft and idler for inside the case.
mikeyscott
28-12-2010, 05:31 PM
Yup Neil does a cracking job with the gears etc :)
very nice peace of kit,just fitted mine,i just wondered why they have gone to all the trouble of making the idler gear when the kit one is metal,would it not have been better leaving out that one and making the one that fits on the layshaft out of metal,that way all the gears would be metal:thumbsup:.........still as i say its a nice peace of kit:wub
The Doctor
30-12-2010, 11:31 PM
Yep, just installed mine too Mark. Looking forward to whooping your backside with it next week. :lol:
Yep, just installed mine too Mark. Looking forward to whooping your backside with it next week. :lol:
your look forward to whooping my backside with a layshaft :confused:
MK Racing
31-12-2010, 10:04 AM
very nice peace of kit,just fitted mine,i just wondered why they have gone to all the trouble of making the idler gear when the kit one is metal,would it not have been better leaving out that one and making the one that fits on the layshaft out of metal,that way all the gears would be metal:thumbsup:.........still as i say its a nice peace of kit:wub
We tested with an alloy idler but the delrin lasted longer. If you look at the kit idler, it is cast not machined so not very good quality, plus with all metal, the gearbox was noisey.
Marc
We tested with an alloy idler but the delrin lasted longer. If you look at the kit idler, it is cast not machined so not very good quality, plus will all metal, the gearbox was noisey.
Marc
thanks for the info Marc.
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.