any1 got a setup for worksop (fs)

[LRP]

as title, ive ran at worksop today with a fs
it was my first time out with it and i wasnt happy with it
could any1 help me out ???:blush:
cheers si

[Neil Skull]

Who was fastest guy at Worksop with an FS?

maybe i can get their set up?

[RogerM]

Speak to Nick Caro (NJC11) ... he loves Worksop and his car goes around sweet. I can't help as I hate the place and avoid it like the plague.

A well set-up FS will feel really ballanced and thus like it's slow ... lap times will tell a different story though :)

I'm sure Nick will help but if not post up your set up and how you would like the car to feel different and I'll do my best to help you

[wacattack]

Who was fastest guy at Worksop with an FS?

maybe i can get their set up?

It was my brother Craig Collinson (Hulk), he's going to be posting the setup on this site shortly

[mikeyscott]

It was my brother Craig Collinson (Hulk), he's going to be posting the setup on this site shortly

Thought he was a durango team driver :confused:

[wacattack]

Thought he was a durango team driver :confused:

He is. Runs the DEX in 4WD and the Fabs Custom Special in 2WD

[Fabs]

Yep but Wayne the setup asked for is for the 4WD...

[wacattack]

Yep but Wayne the setup asked for is for the 4WD...

I thought FS stood for Fabs Special :confused:

[Hulk]

No bruder, FS is the Kyosho Lazer FS (4wd), Fabs car is the Kyosho RB5 MCS (mid custom special).

Silly boy :p

[wacattack]

oops :blush:

[Neil Skull]

FS= Fabs special:thumbsup:

[njc11]

FS= Fabs special:thumbsup:

:thumbsup:

Si, i was running mine yesterday and i was getting better for me throughout the day.. pm me yoru email and i can send you a good starting set up.. come over at the next meet if your struggleing.. Rob can also help too.. Just ask Andy at PBM, the model shop at worksop and he'll point me and Rob out for you :)

:thumbsup:

[RogerM]

FS= Fabs special:thumbsup:

for gods sake don't encourage him!!!! :p

[shanks]

Speak to mattb on here I hear he has been helping some of the "experts" with their set up:confused:

[carlin]

If you aint sure who I'am you cant miss my car it's the pink Kyosho with the Pink Panther on the side.

I was changing alot things yesterday & it was brilliant in my final just wished it was like that through Q :cry:

Welcome to come over have chat or ask any questions.

Nic's car looked fantastic yesterday even though he had the rear end in thousands of bits lol :p:p was so tempted to take bit see how long it would take for him to notice :woot:

I was going to try the Tamiya Ghea pistons but i need to add a small shim but didnt have any right size. Perhaps Fabs could tell me what size shims he is using with his be helpful.

I did also get to run the 2wd in one of the Q it was fantastic tbh i didnt make any changes to the car at all. I think once i get used to driving 2wd i might me upgrading was brilliant :thumbsup:. Wasnt the fastest but had great time with the car

[Fabs]

Same shims as for hinge pins, yu know the 0.1/0.2/0.3mm ones...

[carlin]

Same shims as for hinge pins, yu know the 0.1/0.2/0.3mm ones...

Thanks Fabs, do you put it under the piston or on top?

[Fabs]

Thanks Fabs, do you put it under the piston or on top?

Top but it doesn't matter they're only here to stop the play...

[njc11]

Speak to mattb on here I hear he has been helping some of the "experts" with their set up:confused:

He certainly does!! :thumbsup:

Im sure all the Kyosho boys will pit together at chadderton at the end of the month... and we can all talk set ups!! lol! :woot:

:thumbsup:

So whos in?? add your name to the list..

njc11
Carlin
Mattb
Shanks
Budfish

Theres a couple of others, but cant say at the mo! ;)

[carlin]

Hell yeah be good to be round the table alot easier to talk & have laugh

njc11
Carlin
Mattb
Shanks
Budfish
Colin Reid

I will add Colin Reid to the list he is new to 2wd/electric, Sunday@ Worksop was his first meeting too.

[shanks]

Lol sounds good nick

Looking forward to chadderton indoors now

Seems there will be quite a few new kyosho drivers so it's going to be good to watch :thumbsup:




He certainly does!! :thumbsup:

Im sure all the Kyosho boys will pit together at chadderton at the end of the month... and we can all talk set ups!! lol! :woot:

:thumbsup:

So whos in?? add your name to the list..

njc11
Carlin
Mattb
Shanks
Budfish

Theres a couple of others, but cant say at the mo! ;)

[njc11]

Hell yeah be good to be round the table alot easier to talk & have laugh

njc11
Carlin
Mattb
Shanks
Budfish
Colin Reid

I will add Colin Reid to the list he is new to 2wd/electric, Sunday@ Worksop was his first meeting too.

Rob.. couldnt remember if he was booked in or not.. has he ordered some different motors then? :woot: lol!

[colreid]

Hi Nick,

Yeh, I'm booked in for Chadderton. There will be an 8.5T in the RB5 by then. Just hope you guys are right, and it's going to make all the difference.

Certainly can't make me any worse :woot: LOL

Colin

[njc11]

It will make a big difference buddy... much easier for you to drive especially with your nitro fingers! :thumbsup:

I wanted to watch both yours and Robs cars on sunday, but had my work cut out trying to get mine to work for me.. :yawn:

:thumbsup:

[colreid]

Nick,

Made a few changes throughout the day:-

1) Changed shock oils to 400wt Fr and 300wt Rr. (Kyosho oils)
2) Removed the spacers from the under the inner camber link , front and rear.
3) Changed the rear inner camber link to the middle position

All seemed to help the car rotate more - either that, or it was just my thumbs that were beginning to adjust to the black art of 1/10th 2wd electric :thumbsup:

[njc11]

Nick,

Made a few changes throughout the day:-

1) Changed shock oils to 400wt Fr and 300wt Rr. (Kyosho oils)
2) Removed the spacers from the under the inner camber link , front and rear.
3) Changed the rear inner camber link to the middle position

All seemed to help the car rotate more - either that, or it was just my thumbs that were beginning to adjust to the black art of 1/10th 2wd electric :thumbsup:

Good... at least you feel like your heading somewhere in the right direction :thumbsup: more change at chadderton then, or shoudl we say fine tuning!!

TBH between Worksop and Chadderton i didnt change much at all..

:thumbsup:

[mattb]

Nick,

Made a few changes throughout the day:-

1) Changed shock oils to 400wt Fr and 300wt Rr. (Kyosho oils)
2) Removed the spacers from the under the inner camber link , front and rear.
3) Changed the rear inner camber link to the middle position

All seemed to help the car rotate more - either that, or it was just my thumbs that were beginning to adjust to the black art of 1/10th 2wd electric :thumbsup:why dont you try a rear roll bar id start of with a 1.1mm one? and put a 1mm washer on your front hubs mate

[RogerM]

I take it we are only talking about a completely smooth track surface? If so I'd be tempted with anti roll bars also. NEVER off road though, can make things a little unpredictable.

[mattb]

i beg to differ on that roger i race a bury which is very bumpy and always use a 1.1mm roll bar ive tried all the roll bars and ive found things only start getting unpredictable when you use 1.3mm and above the 1.1 roll bar makes it feel a little more stable and helps it rotate just nicely on wet astro inconjunction with the rear roll bar i use the 2 nobble spacer under law36 and 4 nobble spacer under law37 and it cruises over the bumps and it very flat and not nervous down a very bumpy straight :)

[carlin]

Roll Bars are we swaering now lol :p

Yeah was have been thinking of roll bars but i have never run at chadderton before. Is there much of difference in surface compared to Worksop?

Yeah Colin you will be suprised in the difference in running a 8.5t than that bloody 5.5t you was running :woot:

I know Nick will be swearing at me but also adding some more weight to car will help you aswell.

I'm running Ghea front bulkhead, 52G under the servo, 20G behind the servo & 51G under the lipo car is brilliant so easy to drive. Hell i was having more fun with the 2wd than 4wd in the one run i had at Worksop :D

[carlin]

It will make a big difference buddy... much easier for you to drive especially with your nitro fingers! :thumbsup:

I wanted to watch both yours and Robs cars on sunday, but had my work cut out trying to get mine to work for me.. :yawn:

:thumbsup:

Get it to work Nick, well perhaps not being in thousand bits would of helped lol:p

Both your cars looked good what i saw of them in Q & the finals

[LRP]

thanx for replys guys i will have to come and get some advice off a few of u

did any1 run rollbars at worksop on the fs?

[RogerM]

Matt .. if ARBs work for you mate then use them to your advantage. When I first got the FS I used ARBs 95% of the time and only really started to get what I wanted from the car once I removed them.

If you think Bury is bumpy come to "Car Killer" Coventry .... Bury is like a sheet of fresh glass in comparison :D