PDA

View Full Version : What breaks on the AE Factory B4?


delanobe
08-10-2007, 03:13 PM
Just bought me a B4 and going to order some parts.

I don't have the car yet but would like to order the things that break easely or that you must have as a spare.

Thanks for the info :D

vader
08-10-2007, 03:18 PM
these cars are bullet proof !!! but anything can break if you crash it hard enough. ;):o

get some front wishbones

Wraggy
08-10-2007, 03:30 PM
in a year ive managed to break - 2 front wishbones and front and 2 rear shock towers :eh?: ..apart from that, like Vader says Bulletproof!!!!

delanobe
08-10-2007, 03:32 PM
Vader, that avatar is hilarious! :D

So it's just the A-arms and shock towers?

paulc
08-10-2007, 03:52 PM
main one for me was was the ball joints on the rear plate three in one meeting once but apart from that they are pretty bullet proof

GRIFF55
08-10-2007, 04:09 PM
I've not broke any wishbones or towers, YET!! Must drive a bit like a puff:D. The only thing that i have done, is bent one of the rear drive shafts. Don't ask me how.

josh_smaxx
08-10-2007, 04:47 PM
Ive broken loads on my car but anyone who's seen me drive can see why, front bulkheads and front wishbones are the most popular.....

Lee Martin
08-10-2007, 04:48 PM
then i think its safe to say you wont break much...if there was a trend in trhe breaking then you would spot a weak point....

but as people break different things it shows how hard it is!!!

to be on the safe side i would purchase some frnt axles, frnt and rear arms and frnt and rear tower.....

you should not break anything else really.......

dan_kitty
08-10-2007, 05:02 PM
bulkheads, and ladies hearts

Southwell
08-10-2007, 05:10 PM
Id get a rear u plate and bulkhead, their both cheap.

showtime
08-10-2007, 05:27 PM
ask again on monday

i'm sure i'll have a list of carnage by then!


first time out with 1/10 electric at Clanfield this sunday :o

Spencer Mulcahy
08-10-2007, 11:32 PM
I broke a 30 deg hub carrier yesterday but I did hit a track marker very hard other than that the usual. The plastic parts seem to be stronger than the graphite and cheeper.:D

thom.p
09-10-2007, 06:41 AM
get: front schocktower, front a arms and the steering blocks

Gaz_Stanton
09-10-2007, 07:39 AM
The B4 is pretty bulletproof with enough flex in the right places to absorb most impacts. The pic below shows the sum total of damage from one incident being both shock towers, a split shell and some non round wheels...

http://i204.photobucket.com/albums/bb197/gareth_stanton/DSC01852.jpg

...except that incident was my dad actually running his buggy over with the full size car on the way to the Tiverton National!! And that was twice as the car stalled on the first attempt!! :o :o :rolleyes: :D
Suppose it was quite early in the morning... :wtf:

ashleyb4
09-10-2007, 09:26 AM
That was class, he started doing that to alot of stuff he did it to his laptop a while back.

A

danDanEFC
09-10-2007, 11:02 AM
As I buy the parts for a group of newbies with a brushless motors, of which I am one, I feel I am best placed to answer this question :-)

Different people break different stuff.

Get yourself some front arms and some shock towers, front and back.

As every other person has a B4 you can always get hold of anything else by the track

Cooper
09-10-2007, 11:41 AM
Delanobe,

start with:
front and rear towers
front and rear A arms
front bulkhead
a small amount of screws

other small parts is stuff we, your clubmates, have at races and you can borrow them and give one back later.

If you have more cash to spend on spares add this:

front steering blocks
front caster blocks (30°) !!
rear hubs
screws
spur
top plate
ball studs

josh_smaxx
09-10-2007, 04:09 PM
As I buy the parts for a group of newbies with a brushless motors

I have to say thats me aswell :D probably not somthing to be proud of.

delanobe
10-10-2007, 07:08 PM
Is the kit spur any good or should I buy a smaller/bigger one?

Thanks

jdgarant
18-10-2007, 07:53 PM
Front A Arms (Plastic Composite or Graphite, but mostly graphite)
Wing (Both stock and JConcepts wings break on the sides.)
I always have a spare or two.

I've had the rear shocks disconnect from the a arms but adding a washer in front of them fixed that issue.

Northy
18-10-2007, 08:20 PM
I've had the rear shocks disconnect from the a arms but adding a washer in front of them fixed that issue.

These should stop that little problem :D and look bling :cool:

http://nor-tech.gforceimages.net/store/product_info.php?products_id=50

:)

jdgarant
22-10-2007, 07:48 PM
Ah. Very nice!

Jay-m
23-10-2007, 09:00 PM
i set my car up and run it the frist time i broke anything was the front end i completly ripped it off after over cooking a jump (landed of the race track lol) after that it was not too bad i now no the breaking point of my B4 :D