View Full Version : LIPOs for 511
mikeyscott
26-11-2010, 09:07 PM
What LIPOs are people using as I have some Orions from my FS / Durango and they don't fit :(
Jan Larsen
26-11-2010, 09:22 PM
Are they hitting the bulkhead?
mikeyscott
26-11-2010, 09:26 PM
Too high to fit under top deck. Orion 4500s, pretty tall.
Looks like I may sell them with kyosho or Durango.
Lee Martin
26-11-2010, 09:32 PM
Speed power.
mikeyscott
26-11-2010, 09:35 PM
Speed power.
What I'll prob look at, but serious money. Had them in my sx before nosram and think the case is better on the sp.
Also good starting point re dimensions. Assume 4200s?
Lee Martin
26-11-2010, 09:38 PM
yep!!! they the ones. and in response to your pm...no im not using them...
mikeyscott
26-11-2010, 09:47 PM
Ok cheers, better save up for a set for Petit along with all the spares - £££
Orion LIPOs now to be added to the for sale list!
feniks
26-11-2010, 10:49 PM
I am using the GM lipo's 42OO 35 c and have no problems. the new 5000 plus paks will fit in there aswel and not that expensif
rc_penguin
26-11-2010, 11:03 PM
Im using the orion lipo's? there's about 2/3mm between them and the top deck. You sure that there not hitting the centre bulkhead? as you have to cut away part of it for almost any lipo as im aware? It even says to do so in the instructions of the 511 lipo retainer :)
With the Reedy 4900 35 C Efra spec you have to use dremel on the center bulkhead and a short screw and after it work pretty well :thumbsup:
mikeyscott
27-11-2010, 08:52 AM
Just got the car and not planning on dremeling anything for the moment.
mikeyscott
27-11-2010, 08:54 AM
Im using the orion lipo's? there's about 2/3mm between them and the top deck. You sure that there not hitting the centre bulkhead? as you have to cut away part of it for almost any lipo as im aware? It even says to do so in the instructions of the 511 lipo retainer :)
Car was already fitted with retainer, so not sure how it fits together.
They won't fit between the posts, I'll take it a part later and go from there.
mikeyscott
27-11-2010, 11:19 AM
Going to order fredrick's lipo craddle and diff covers. Think that should solve it :)
Hi Mikey,
I run the orion saddles on my 511 and yes fredrick's lipo craddle solves it by moving the lipos back by a few millimetres.
Fabs
mikeyscott
27-11-2010, 12:14 PM
Hi Mikey,
I run the orion saddles on my 511 and yes fredrick's lipo craddle solves it by moving the lipos back by a few millimetres.
Fabs
Cheers for confirming. Have emailed him :)
muratti
27-11-2010, 04:05 PM
Going to order fredrick's lipo craddle and diff covers. Think that should solve it :)
A wise decision! :thumbsup:
djmcnz
29-11-2010, 11:41 AM
Intellect 4200 saddle packs fit in just fine without modifications.
http://img.photobucket.com/albums/v227/djmcnz/RC%20Cars/TRF511/LipoFitLarge.jpg
Just add spacers to the battery stay posts to raise them up.
Although I've since added Fredrick's cradle it wasn't really necessary (but it is nice).
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.