PDA

View Full Version : 511 Tamiya shock tower


mikeyscott
19-12-2010, 01:09 PM
These seem to be rare as rocking horse.. What other towers do people
recommend? Just a bit concerned that I'm light on the Tamiya spares for Petit etc.

Have found some Tamiya ones in the USA, but they don't ship outside of the USA and other sites charge a fortune for postage.

Smartalec
19-12-2010, 01:23 PM
I thought this was already answered in one of your other posts Mikey? .......... FIBRELYTE make them in various thicknesses, you just have to ask ;)

brookie
19-12-2010, 01:27 PM
Simples Mikey.....one word, well hyphenated actually!

Fibre-Lyte

Though not listed on their website (http://www.fibre-lyte.co.uk/) am led to believe that that have the towers on their CAD/CAM and can produce them in alternative materials and differing thicknesses.
Would suggest contacting them directly, previously they've always been very helpful to me, timely and competitively priced for, in general, a better product :thumbsup:

mikeyscott
19-12-2010, 01:29 PM
ok thanks. Obviously missed the previous answer :( sorry.


Had it mentioned the other week that fibre lyte towers cause other issues.. I'll google them and go from there.

GRIFF55
19-12-2010, 02:16 PM
daveg28 is selling tamiya shock towers on here also:thumbsup:

MikePimlott
07-02-2011, 12:32 PM
sorry to dig up an old thread but couldnt find an answer.

Are 501 and 511 towers the same, Fibre lyte only have 501 listed on there web site ?

thanks.

footey
07-02-2011, 12:50 PM
atomic carbon have some on there site on special offer aswell :thumbsup:

northy will be at chaderton on sunday so if your going there might be able to take for you pm northy;)

MikePimlott
07-02-2011, 01:12 PM
Cheers Shane, There only 3mm though, same as kit ones i have.
fibre-lyte ones go to 5mm :o

BUT are they exactly the same 501 to 511

atomic carbon have some on there site on special offer aswell :thumbsup:

northy will be at chaderton on sunday so if your going there might be able to take for you pm northy;)

timmy121
07-02-2011, 01:23 PM
i have these for sale mike
http://www.oople.com/forums/showthread.php?t=61936&highlight=tamiya
i've been told 501 and 511 towers are the same
can take them with me to chadderton if you to what check that they are the same

Northy
07-02-2011, 01:30 PM
Cheers Shane, There only 3mm though, same as kit ones i have.
fibre-lyte ones go to 5mm :o

BUT are they exactly the same 501 to 511

Mike, if you think towers are hard to get, try getting the blue ali bits they bolt to when you've bent/snapped them due to using too thick shock towers! :o

G

Lee Martin
07-02-2011, 01:44 PM
Who needs that part?
If people seriously can't find them, just ask me....

Tamiya spares in the UK may be made more readily available in the near future ;)

Nige
07-02-2011, 01:54 PM
Tamiya spares in the UK may be made more readily available in the near future ;)


:thumbsup:

Northy
07-02-2011, 02:00 PM
Who needs that part?

I did when I bought a 501 with one snapped due to someone crashing it hard with a thick tower on.

G

feniks
07-02-2011, 03:20 PM
a small shop in belgium makes them aswell on order.
have broken them a lot so if I make a call i can collect them 1 hour later .
lol .